**DJ RESOURCES** Join my Wedding DJ Mastery community to learn and master the 5 skills to become full-time wedding DJ professionals: link.djmojoe.com/weddingdjmastery
I just bought one of these, used it a bar, small dj gig. It had enough power for like 100 people, and it never busted a sweat. Im going to buy another one for weddings or larger events.
Great review. After deciding to go for this type of column array system because I needed a system that would fit in my car and would be as powerful as possible, I did buy 2 of these speakers a few months ago and my biggest reasons were adjustable height and power output - which meant that the only real alternative was the Evox 12, as all other similar systems don't compare in those areas. Decided on these as I understood they had a little more power and I'm very happy with them. Still need to learn the different options and settings on the DSP, but hopefully I'll get to it soon enough. Regardless, I already dj'ed a party (not wedding, so just about everyone was dancing...) for 250 people using these and had no volume issues. Love the lighting fixture trick - I'll need to get me one of those adaptors. Thanks again for the video !
This guy's got an actual honest DJ's opinion on how many people this system can handle. I hear people saying the evolve 50's can do a party up to 300 and I think they're crazy.
Lucas, I've used the Evolve 50 for almost two years, mostly weddings, Karaoke and then there are the larger events like Law Enforcement conventions. You are spot on about it not handling the larger groups. I'm looking at replacing it with something that throws more / Deeper in the room. The Evolve 50's DIE as far as throw after about 30 feet. Don't get me wrong they sound very good for a Small room. I just needed something that carried further back in the room. At weddings with the Evolves , I had complaints (for the first time in over 40 years) that people could not hear. Just venting
@@michaelha7 I keep two evolve 50’s in my van as my permanent “backup” set and for rooms where my qsc 18” and k10’s are inappropriate because room is too small etc. or guest count is 50 or less.
@@lucaslovesyouiii lucas, thank you for the reply. I'm trying out some DB technologies es 1002 and they sound better. The room is about 150 feet long and 30 feet wide, they are doing a better job. They are a bit of a challenge to do my karaoke shows as the set up allows a lot of the bass to come back on the stage where the singers are. I will try my compact QSC sub and K12.2 and see if that works better. I'm just looking for something that can do my bigger shows without having to lug around a ton . Been playing music since 1978 which makes me ... well... DJ Older than Dirt haha. Thanks again.
came across these and from the test i've seen they are awesome... Italy really make some great speakers clear sound, I have Mackie SRM 650 which were made in Italy and they have great sound..
Yea! it has to be small light fixtures to make it work. When I mean small, I mean lightweight. Then I use the ADJ O-Clamp to attach the light fixture to the pole (geni.us/ADJ-O-Clamp)
I have a small venue we are building out for Jazz style music. Low ceilings and stone walls. Building from the early 1800's. We also host larger events for up to 500 and wanted to be able to take these and replace an order system. Had locked into the EV50M's. But I love the quality and sturdiness of the DBT units. I think the EV's might be better for the small space but not as flexible. Any input?
I’m not an expert in installations, but I figured it would be better to have a modular system where you can swap out speakers in case you want to change in the future
dantonliam i has all the the evox, had the evolve 50... switch to the es1203! Its the best and more flexible! The sub doesnt rumble but it kicks like crazy
Hi Mojoe. I just bought a RCF Jmix 8 it’s gonna arrive tomorrow. Given your experience with the db and RCF which would you recommend for a gigging acoustic guitarist who plays with a drum machine? TONE is EVERYTHING about my pa…not loudness. I want my system to sound absolutely incredible. Which would you go with??? Thank you
Hey congrats on your Jmix 8! I’m a bit biased but I like the audio quality of the RCF more. Just sounds more crisp. And good you have mixer capabilities in case you want to adjust the EQ. Enjoy!!
Thanks for the review. I've had the Evox 12s which were great speakers. I have since sold them but now I want to buy another column setup. Have you checked out the FBT CS1000? By the way, I like the light adapter. That just may be the tipping point to buy these! 👍😅
You're welcome! No, I haven't heard the FBT CS1000. I want to hear all the speakers now and see how they sound haha. Yea, I like column arrays. They're more sleek at my events
The red led does not identify a clip, it does not exist in these systems! The red LED simply indicates that the DSP system inside the speaker is dynamically managing the level so if the LED flashes, especially on kick or bass hits, it is quite normal. If it stays on almost steady it means that too high a level is being applied. The dsp will still limit the level avoiding damage to the system but once the maximum level is reached it will be useless to increase the general level again because the dsp will limit until the maximum level is obtained without distortions.
@@djmojoeofficialI think the bigger question is if the amps in one sub will adequately power 4 of those tops since they’re designed to work with just two.
Hello friend just a question about the ES 1203 I want to acquire a second system, so my question is: on the db technology documentation for a pair of ES 1203 they say to connect to AUX via the second system which would be in slave mode, but with this connection will have all the power of the HP? or maybe a classic connection L on one HP and R on the other HP would be best? in fact what is the most suitable connection to have the full power of the hp .. thank you for the answer
@@robertog3401 grazie per il tuo commento ma la mia domanda era: è meglio cablare le colonne separatamente, cioè destra e sinistra su una console o in aux ... per avere le migliori prestazioni possibili
Great info and nice speakers but I’m probably good with my RCF Evox rigs (have both the 8 & 12 series). Maybe if I just wanted to “do something else” I’d consider these (but why? Because I’m a greedy little gear whore lol)...but seriously, I think for anyone who wants to step up their game (massively) , you can’t go wrong with either one! 👍🏽
I considered other options, but there is nothing that really compares (as of now) for price. The F1 is close. I am sure another system will come out soon enough :)
@@DJJASProductions Hi! Please, I would like your opinion, as an expert in covering musical events! Which of the following suggestions is the most effective way to cover outdoor rock concerts in the presence of 500-700 people: 1nd sentence: on stage as follows: 2 pieces: dB Technologies sub 18D, with the 2 sound systems: dB Technologies es 1203 on the left side and 2 pieces: dB Technologies sub 18D, with the 2 sound systems: dB Technologies es 1203, on the right side. 2rd sentence: on stage as follows: 3 pieces, sound systems: dB Technologies es 1203 on the left side and 3 sound systems: dB Technologies es 1203, on the right side. Thanks for your time!
**DJ RESOURCES**
Join my Wedding DJ Mastery community to learn and master the 5 skills to become full-time wedding DJ professionals:
link.djmojoe.com/weddingdjmastery
Thank you so much! I love that you guys took the time to go into detail & include real world uses, issues and exp. Great REAL in depth reveiw!
Glad it was helpful!
@@djmojoeofficial Bose F1 system vs DB Technologies ES1203. Which is better? Why?
I just bought one of these, used it a bar, small dj gig. It had enough power for like 100 people, and it never busted a sweat. Im going to buy another one for weddings or larger events.
Great review. After deciding to go for this type of column array system because I needed a system that would fit in my car and would be as powerful as possible, I did buy 2 of these speakers a few months ago and my biggest reasons were adjustable height and power output - which meant that the only real alternative was the Evox 12, as all other similar systems don't compare in those areas. Decided on these as I understood they had a little more power and I'm very happy with them. Still need to learn the different options and settings on the DSP, but hopefully I'll get to it soon enough. Regardless, I already dj'ed a party (not wedding, so just about everyone was dancing...) for 250 people using these and had no volume issues. Love the lighting fixture trick - I'll need to get me one of those adaptors. Thanks again for the video !
This guy's got an actual honest DJ's opinion on how many people this system can handle. I hear people saying the evolve 50's can do a party up to 300 and I think they're crazy.
Lucas, I've used the Evolve 50 for almost two years, mostly weddings, Karaoke and then there are the larger events like Law Enforcement conventions. You are spot on about it not handling the larger groups. I'm looking at replacing it with something that throws more / Deeper in the room. The Evolve 50's DIE as far as throw after about 30 feet. Don't get me wrong they sound very good for a Small room. I just needed something that carried further back in the room. At weddings with the Evolves , I had complaints (for the first time in over 40 years) that people could not hear. Just venting
@@michaelha7 I keep two evolve 50’s in my van as my permanent “backup” set and for rooms where my qsc 18” and k10’s are inappropriate because room is too small etc. or guest count is 50 or less.
@@lucaslovesyouiii lucas, thank you for the reply. I'm trying out some DB technologies es 1002 and they sound better. The room is about 150 feet long and 30 feet wide, they are doing a better job. They are a bit of a challenge to do my karaoke shows as the set up allows a lot of the bass to come back on the stage where the singers are. I will try my compact QSC sub and K12.2 and see if that works better. I'm just looking for something that can do my bigger shows without having to lug around a ton . Been playing music since 1978 which makes me ... well... DJ Older than Dirt haha. Thanks again.
Great review Joe and Jaz! I've been a colum cynic...but I'm slowly being persuaded.
Great review guys thanks for that. I bought my 1st set and i will definitely buy a 2nd set for my weddings.
came across these and from the test i've seen they are awesome... Italy really make some great speakers clear sound, I have Mackie SRM 650 which were made in Italy and they have great sound..
The little pole to mount the speaker i dont see a link for it . Can you tell me where you got it ?
Is better the DB tecnologies es 1203 or JBL prx one?
Can I use 1 sub with 4 tops per side?and what is the benefit of this?
Just wondering about the db Ig3t speaker. It's not the same design, but do you know much about it
Hi MoJoe. You mentioned lights on RCF Evox how are you doing that. I have the JMix 8 and would love to put lights on them. Let me know Thanks Mike
Yea! it has to be small light fixtures to make it work. When I mean small, I mean lightweight. Then I use the ADJ O-Clamp to attach the light fixture to the pole (geni.us/ADJ-O-Clamp)
Where can I get this adaptors for lights?
I have a small venue we are building out for Jazz style music. Low ceilings and stone walls. Building from the early 1800's. We also host larger events for up to 500 and wanted to be able to take these and replace an order system. Had locked into the EV50M's. But I love the quality and sturdiness of the DBT units. I think the EV's might be better for the small space but not as flexible. Any input?
I’m not an expert in installations, but I figured it would be better to have a modular system where you can swap out speakers in case you want to change in the future
So curious on how you think it compares with the RCF and the Evolve
dantonliam i has all the the evox, had the evolve 50... switch to the es1203! Its the best and more flexible! The sub doesnt rumble but it kicks like crazy
Hi Mojoe. I just bought a RCF Jmix 8 it’s gonna arrive tomorrow. Given your experience with the db and RCF which would you recommend for a gigging acoustic guitarist who plays with a drum machine? TONE is EVERYTHING about my pa…not loudness. I want my system to sound absolutely incredible. Which would you go with??? Thank you
Hey congrats on your Jmix 8!
I’m a bit biased but I like the audio quality of the RCF more. Just sounds more crisp. And good you have mixer capabilities in case you want to adjust the EQ. Enjoy!!
Thanks for the review. I've had the Evox 12s which were great speakers. I have since sold them but now I want to buy another column setup. Have you checked out the FBT CS1000? By the way, I like the light adapter. That just may be the tipping point to buy these! 👍😅
You're welcome! No, I haven't heard the FBT CS1000. I want to hear all the speakers now and see how they sound haha. Yea, I like column arrays. They're more sleek at my events
looks amazing, but i'm more interested in the stereo configuration. and i think the dummie speaker doesn't look as sleek as the two poles.
Personally, I like the pole look. I also have the option to include a light fixture to the pole if I want, too.
What types and make are those mics you're using?
The mics are from Movo and the wireless transmitters are from NUX. Here's the link for them (kit.co/djmojoe/youtube-video-production-tools)
I've never even heard these and I'd take them any/all day over a Bose L1 setup...
just looking for a bit of advice please... is it possible to connect this system to my unpowered behringer mixing desk?
Hi Damien, if your mixer has an XLR out, you can use an XLR cable to connect your mixer to the speaker
@@djmojoeofficial many thanks my good man🙂🎶
I have a set of these and one of them clips constantly. What dsp settings do you recommend.
That's a good question for DJ JAS
DJ MoJoe waiting for someone to respond
Please reach out to DJ JAS on Instagram: @jas_productions
@@djmojoeofficial thanks
The red led does not identify a clip, it does not exist in these systems!
The red LED simply indicates that the DSP system inside the speaker is dynamically managing the level so if the LED flashes, especially on kick or bass hits, it is quite normal.
If it stays on almost steady it means that too high a level is being applied.
The dsp will still limit the level avoiding damage to the system but once the maximum level is reached it will be useless to increase the general level again because the dsp will limit until the maximum level is obtained without distortions.
i think he likes the Bose L1 he keeps talking about better than the DB
So Dj Jas…why did you get rid of the Bose?
I have latino band what do you recomended to buy evox 12 or db 1203 to using out and in for even no more then 300 peoples???
EVOX 12s. Just my opinion, I’m a bit biased since I love RCF. The vocal clarity on the EVOX 12s are more brilliant and that’s what I like
@@djmojoeofficial what about the poching bass
Jas said he was waiting for the Bose Model3, well that would be the new Bose L1Pro32/Sub2. Can you ask Jas how that compares to the dB?
the new Bose beats the 1203, especially if you want deep bass vs upper mid bass. It's also looks cleaner and and is easier to move around.
@@DJJASProductions so the new Bose sub2 hits harder than the sub on the ES 1203? Cuz I heard the Es and was really impressed by the sub
@@renerodriguez1876 the Sub 2 extends way lower.
@@DJJASProductions would you compare theses subs to the original QSC Ksubs?
@@brendanmichaelburchill5393 no, these blow away the K subs.
I just bought two es1203, i wonder if its bad to use 1 sub with 4 arrays ( normal its 2 ) so that i can still put lights on top fot smaller gigs??
Congrats with the purchase! As long as it sounds good for your clients, provides enough coverage, and you clean up your setup look, you’ll be fine
@@djmojoeofficialI think the bigger question is if the amps in one sub will adequately power 4 of those tops since they’re designed to work with just two.
In characteristics, it says that DB E1203 has 2400 watts and Evox 12 has 1400 watts. Is it correct that DB E1203 is louder and more powerfull?
Unfortunatley, NO those stories with 2400 w are very not true.
Two evolve 50's or one of these? They are thes same price.
Hmm.. I would say 2 evolve 50s. You get more spread coverage with 2 speakers and one speaker can act as a backup. More bang for your buck
60hz is nice good punchy bass
Yes sir!
brother rcf evox 5 price
I checked.. at some places it's $999 . Check idjnow.com
Hello friend
just a question about the ES 1203 I want to acquire a second system, so my question is: on the db technology documentation for a pair of ES 1203 they say to connect to AUX via the second system which would be in slave mode, but with this connection will have all the power of the HP? or maybe a classic connection L on one HP and R on the other HP would be best? in fact what is the most suitable connection to have the full power of the hp .. thank you for the answer
La potenza non cambia. Questa cosa serve perché se collega un apparato Bluetooth anche quello sarà stereo
@@robertog3401 grazie per il tuo commento ma la mia domanda era: è meglio cablare le colonne separatamente, cioè destra e sinistra su una console o in aux ... per avere le migliori prestazioni possibili
@@followoctopus5201 they said power doesnt change..
ok I will do some tests myself there they are unpacking but never try following the covid
@@followoctopus5201 for my esperience, frequencies are managed a little better using aux/ master/slave mode.
Power is the same
Great info and nice speakers but I’m probably good with my RCF Evox rigs (have both the 8 & 12 series). Maybe if I just wanted to “do something else” I’d consider these (but why? Because I’m a greedy little gear whore lol)...but seriously, I think for anyone who wants to step up their game (massively) , you can’t go wrong with either one! 👍🏽
What was that crappy static in the sound at about 10:20
yea, interference with my wireless mic
Now i want 2 bose L1 paired with 2 f1 sub 🤦🏼♂️
L1 are middy. Too middy. Bose F1 model 812 is better.
@@josealfredfernandes Is F1 + 812 more powerful with less clipping than ES1203?
In Italy we can change the firmware and get 10% more power changing fir filters
Nice!!
@Luca Berolaso what is the latest version firmware that you have?
@@dariol.8977 I need to check
K-array speakers
Fbt vertus cs-1000
@@djphillmp nowhere near the bass and overall output, but they do sound great!
@@DJJASProductions FBT Vertus CLA series
Great speaker, but the stuff you could buy for $2500 per side ....
I considered other options, but there is nothing that really compares (as of now) for price. The F1 is close. I am sure another system will come out soon enough :)
JAS Productions thanks for the -6db on low end, ill try that at my next gig. They peak easily at zero too
@@DJJASProductions Hi!
Please, I would like your opinion, as an expert in covering musical events!
Which of the following suggestions is the most effective way to cover outdoor rock concerts in the presence of 500-700 people:
1nd sentence:
on stage as follows:
2 pieces: dB Technologies sub 18D, with the 2 sound systems: dB Technologies es 1203 on the left side and 2 pieces: dB Technologies sub 18D, with the 2 sound systems: dB Technologies es 1203, on the right side.
2rd sentence:
on stage as follows:
3 pieces, sound systems: dB Technologies es 1203 on the left side and 3 sound systems: dB Technologies es 1203, on the right side.
Thanks for your time!
Well you have the flexibility of a stereo setup with one, double-subwoofer cabinet
What’s with the long ass mics? 😂