DIY Guide: Changing the Final Drive Oil on Your BMW R1150GS - Step-by-Step Tutorial

Sdílet
Vložit
  • čas přidán 20. 12. 2023
  • Welcome to another informative DIY tutorial on maintaining your BMW R1150GS! In this video,
    I guide you through the step-by-step process of changing the END GEAR OIL, ensuring optimal performance and longevity for your bike's final drive.
    Whether you're a seasoned rider or a DIY enthusiast, I break down the procedure into easy-to-follow instructions, making it accessible for everyone.
    Learn the essential tools you'll need, the correct oil specifications, and gain the confidence to perform this routine maintenance task on your own.
    Save time and money by taking control of your motorcycle's care.
    Watch, learn, and ride with confidence as The Old Mechanic empower you to handle the end gear oil change on your BMW R1150GS like a pro!
    Don't forget to hit that like button, subscribe for more motorcycle maintenance tips, and let me know in the comments about your experience with DIY maintenance. Happy riding! 🏍️✨
    TOOLS YOU NEED or want:
    1/2" Drive Impact Hex Bit Set: amzn.to/48DsdUf
    3-Piece Ratchet Set 1/2" 3/8" 1/4-Inch Drive: amzn.to/4al04mr
    Torque Wrench 1/2-Inch Drive: amzn.to/3vaADnh
    Craftsman Wrench Set, Metric: amzn.to/3NFd0tx
    #motorcyclemaintenance #bmwr1150gs #theoldmechanic
    Motorcycle maintenance made easy by: The Old Mechanic
  • Auta a dopravní prostředky

Komentáře • 10

  • @Halberd1216
    @Halberd1216 Před 27 dny

    Great guide, very much enjoyed the video. I am rebuilding 2 old bikes that I have had in storage for a few years, a BMW R1150GS ( 2003 ) and a BMW R100GSPD ( 1993 ) and these videos are a great way to remind myself how to service them again.

  • @randyburgos
    @randyburgos Před 6 měsíci +1

    Yes this is something that a lot of riders don’t do. Great job Old Mac
    Randy

  • @MyINNOVAMotorcycling
    @MyINNOVAMotorcycling Před 6 měsíci

    Thanks. Very good diy vid.
    In old motorcycles, it is recommended to lower the torque, and use sealing glue. This is also to ensure a seal where the screw and the seal surface are already worn from the past years, and also to keep the screw from tearing the screw threds.

  • @Herr_Flick
    @Herr_Flick Před 6 měsíci

    Ik begon het Brabantse Engelse dialect al te missen. 😄 Was weer een lange tijd geleden dat ik een mooi filmpje mocht zien van u. Bedankt weer.

    • @TheOldMechanic
      @TheOldMechanic  Před 6 měsíci

      Helaas is mijn vrouw getroffen door de meest verschrikkelijkste ziekte die je, je kunt indenken. Daardoor ben ik vanaf eind augustus uit de running, zogezegt. Ineens ben je dan mantelzorger. Sindsdien is ze al een keer of 6..7 (ik ben de tel kwijt) Met gillende sirenes het zknhuis in gesjeest. Maar nu gaat het een klein beetje beter. De filmpjes die ik er nu opzet is al geschoten in maart.. vandaar mn afwezigheid 😉

  • @horstweber1330
    @horstweber1330 Před 6 měsíci

    Ich benutze eine Spritze mit ml Einteilung für kleine Öffnungen - bin auch ein alter Mechaniker 😊

  • @TheTuxMaster
    @TheTuxMaster Před 6 měsíci

    Wie der Reifen, habe ich auf meinem GS-00 mindestens 10.000 gefahren
    google translate (sweden)

  • @kwiebje24
    @kwiebje24 Před 6 měsíci

    Was dat blauwe spul in de aanbieding 😂. Leuk filmpje weer 👍. Brabants Engels, ik hou ervan ( ben ook een Brabo) 😀

  • @hakanflank8424
    @hakanflank8424 Před 6 měsíci +2

    Earlier you used Transmax Axle but now you changed to Transmax Universal. Why?

    • @TheOldMechanic
      @TheOldMechanic  Před 6 měsíci

      These are oils that Castrol advice, and sometimes they simply rename that oil 😉