Video není dostupné.
Omlouváme se.
THE SECRETS OF TED WILLIAMS, ESKA, SEARS AND GAMEFISHER OUTBOARD MOTORS - UPDATE VIDEO
Vložit
- čas přidán 3. 05. 2023
- This video is made for people with no experience to be able to service their outboard motor in the easiest way.
2 stroke,
двутактов двигател,
Ted Williams outboard,
Ted Williams 7HP,
Ted Williams 7.5HP,
Ted Williams 3HP,
Ted Williams 4HP,
Ted Williams 5HP,
Ted Williams 5.5HP,
Ted Williams 9.9HP,
Ted Williams 15HP,
Sears 7HP,
Sears 7.5HP,
Sears 3HP,
Sears 4HP,
Sears 5HP,
Sears 5.5HP,
Sears 9.9HP,
Sears 15HP,
sears outboard,
Eska 7HP,
Eska 7.5HP,
Eska 3HP,
Eska 4HP,
Eska 5HP,
Eska 5.5HP,
Eska 9.9HP,
Eska 15HP,
Gamefisher outboard,
Gamefisher 7HP,
Gamefisher 7.5HP,
Gamefisher 3HP,
Gamefisher 4HP,
Gamefisher 5HP,
Terhi 3.5 HP Valmet,
Terhi 5hp,
Terhi 4.5HP,
Gamefisher 5.5HP,
Gamefisher 9.9HP,
Gamefisher 15HP,
Ted Williams carburetor rebuild,
Ted Williams fuel pump,
Ted Williams carburetor problems,
Ted Williams flooded engine,
Ted Williams flooded motor,
Ted Williams wet spark plug,
Ted Williams fuel leak,
Sears carburetor rebuild,
Sears fuel pump,
Sears carburetor problems,
Sears flooded engine,
Sears flooded motor,
Sears wet spark plug,
Sears fuel leak,
Eska carburetor rebuild,
Eska fuel pump,
Eska carburetor problems,
Eska flooded engine,
Eska flooded motor,
Eska wet spark plug,
Eska fuel leak,
Gamefisher carburetor rebuild,
Gamefisher fuel pump,
Gamefisher carburetor problems,
Gamefisher flooded engine,
Gamefisher flooded motor,
Gamefisher wet spark plug,
Gamefisher fuel leak,
Outboard motor tune up,
Terhi outboard motor,
SEARS
1964
574.60030....3.5 HP
574.6004....6 HP
574.60100....7.5 HP
574.60150....14.1 HP
574.60370....28 HP
574.60380....28 HP
574.6056....45 HP
574.6077....75.2
1965
582.60910....3.5 HP
574.60121....7.5 HP
571.59270....12 HP
571.59410....35 HP
574.60580....45 HP
574.60780....75.2 HP
1966
582.60920....3.5 HP
574.60880....6 HP
574.60600....7.5 HP
574.60610....7.5 HP
574.60660....9 HP
574.60670....9 HP
574.60690....14.1 HP
574.60700....28 HP
574.60620....45 HP
574.60640....75.2 HP
1967
582.5950....3.5 HP
574.5951....6 HP
574.5952....7.5 HP
574.5953....7.5 HP
574.5954....9 HP
574.5955....9 HP
574.5956....14.1 HP
574.5957....28 HP
574.5958....45 HP
574.5959....45 HP
574.5960....75.2 HP
574.5961....75.2 HP
1968
574.5986....3.5 HP
574.5984....4 HP
574.5991....7.5 HP
574.5993....7.5 HP
574.5974....9 HP
574.5975....9 HP
574.5976....14 HP
574.5977....28 HP
574.5978....45 HP
574.5979....45 HP
574.5980....75 HP
574.5981....75 HP
1969
574.5851....3.5 HP
574.5984....4 HP
574.5852....5 HP
574.5993....7.5 HP
574.6021....7.5 HP
574.5974....9 HP
574.5975....9 HP
574.5976....14 HP
574.5977....28 HP
574.5978....45 HP
1965
1147 3
1140, 1144 4
1142, 1145, 1148 5
1141, 1146 6
1966
1153 3
1157, 1159 6
1967
1160, 1161, 1163, 1173 3
1162, 1164, 1165 5
1166, 1169, 1175 5
1167, 1168, 1170, 1174 7
1968
1183,1193 3
1178,1180, 1185, 1195 5
1179, 1181, 1187, 1197 7
1969
1188, 1703, 1713 3.5
1700, 1703A, 1709, 1713A 3.5
1189, 1194, 1710, 1705, 1715, 1701, 1706 5
1186, 1199, 1702, 1707, 1717, 1708, 1711 7
1970
1188B, 1703B, 1704B, 1709B,1713B, 1732B 3.5
1189B, 1701B, 1733B, 1705B, 1706B, 1733B 5
1199B, 1702B, 1707B, 1708B, 1717B, 1723B, 1734B 7
1971
1703B, 1713B 3.5
1705B, 1715B 5
1707B, 1717B 7
1727A, 1747A 7
1972
1703D, 1788A 3.5
1705D, 1789A 5
1747B, 1790A 7
1973
1945A 3.5
1705E 5
1928 5
1747C 7
1944 7.5
1925A 9.5
1926A 14
1974
1945B 3.5
1705F 5
1928B 5
1747D 7
1944B 7.5
1925B 9.5
1926B 14
1975
1974A 4.5
1975A 5.5
1944C 7.5
1976A 7.5
1978A 9.9
1979A 15
1976
1973B 3
1974B 4.5
1975B 5.5
1944D 7.5
1976B 7.5
1978C 9.9
1979C 15
1977
14058 1.2
14089 2.5
14034 3.5
14035 5
14036 5
14037 7.5
14038 7.5
14059 7.5
14039 9.9
14040 15
1978
14058 1.2
14110 1.5
14089 2.5
14034 3.5
14035 5
14106 5
14107 7.5
14108 7.5
14109 9.9
1979
14058 1.2
14089 2.5
14034 3.5
14035 5
14106 5
14107 7.5
14108 7.5
14109 9.9
14110 15
1980
14139 3.5
14140 5
14141 7.5
14152 9.9
217.58510
217.58511
217.58512
217.58513
217.58520
217.58521
217.58530
217.58531
217.58532
217.58540
217.58541
217.58543
217.58544
217.58550
217.58553
217.58560
217.58561
217.58562
217.58563
217.58580
217.58610
217.58620
217-58710
217.58711
217.58720
217.58721
217.58760
217.58761
217.58820
217.58821
217-58830
217.58850
217.58870
217.58880
217.58881
217.58882
217.58890
217.58891
217.58960
217.58961
217.58962
217.58970
217.58971
217.58990
217.58991
217.58992
217.59310
217.59311
217.59430
217.59431
217.59432
217.59440
217.59450
217.59460
217.59461
217.59462
217.59463
217.59464
217.59480
217.59490
217.59491
217.59501
217.59670
217.59671
217.59672
217.59673
217.59680
217.59860
217.59861
217.59862
217.59900
217.59980
217.585120
217.585121
217.585122
217.585210
217.585211
217.585220
217.585230
217.585240
217.585241
217.585250
217.585270
217.585410
217.585411
217.585420
217.585430
217.585431
217.585440
217.585441
217.585850
217.585860
217.585861
217.585870
217.585880
217.585890
217.585910
217.585911
217.585920
217.585930
217.585931
217.586110
217.586111
217.586120
217.586210
217.586211
217.586220
217.586230
217.586231
217.586310
217.586311
217.586320
217.586330
217.586331
Best motor ever made
thank you, this was well done!
Thanks!
I have a 5 hp 1970 no impeller but a pick up tube runs beautifully.
Thanks!
Hi, we here have these marketed as Terhi (in Finland) or Tern when exported. I have a 3hp motor and a 5 hp, the smaller is eventually a Tecumseh AV520-624 or rather T624 as it's from the 60ies, may be even 1967. This bigger is a mix of Mahle and some parts made hereabout. Just few minutes ago I succeed in starting the 3 hp, quite a sweaty procedure... Maybe something or a lot wrong with its carburetor. Homemade pump flaps maybe ok, but that little rubber tube inside the carb. is closer to 50yrs old´, and not doing its work perfectly. This is so old that it still has old fashioned points. I added an ign.chip meant for some John Deere little thing and a flip-flop switch to use either points or this, well, "pointless" system. They both work, but not helping much to get the engine running well or even starting easily. The easiest way to start is with a cordless drill from its flywheel nut... Better to have oars onboard when boating with this.
Thank you for sharing this information. I'm surprised that this outboard motor was exported to Europe.
@@BoatMotors Yes, Tecumseh, or the company behind, must have had very good salesman those days for they’ve sold so many to this god’s forsaken place 😊
Here these T624s (or Terhi 3s) are known for being the most unreliable outboard engines; a common joke was that Terhi 3 takes you off the shore and oars take you back, something like that. Eg. I bought mine for a dark roasted coffee pack of 500g, maybe worth 5-6 EUR, just two months ago. This had fried its ign.coil’s secondary winding, and lost the main valve assy. The ignition coil was an easy part as you can find pretty cheap Chinese coils fitting well, but the carburettor is a pia, all original nuts and bolts are in imperial dims, and Aliexpress-spares are metric.
As told I got this running somehow but for now it’s better to keep it in the garage.
@@heinawithdotshanko Thank you for the information! Yes this motors are not reliable!
Good luck!
i can't even get mine to fire at all. it sat for like nine years. I tried to start it in 2017 and failed, and just tried again. I suppose the carburetor is all gummed up or something terrible. I'm broke for the first time in 15 years so I'd really like to get this POS working because I certainly can't buy a better motor
Check your spark plug wires and plug if you haven’t already
@travis- I had a heck of a time taking it apart attempting to access the far end of the spark cable, and then had to quit halfway in. Hopefully I'll figure out how to get it back together someday. Thanks for responding though
@@barnacleburrito3728 of course man I just started digging into my little 7.5 and as long you take pictures it’s not that complicated to put back. I might try making a video and posting it of me putting it back together. What hp and brand do you got?
mine is a Sears Ted Williams 4.5hp, but unlike most of them mine doesn't have the white top, it a just green like the bottom half. Anyway, I didn't expect that I would be forced by circumstances to leave the project for later, so I failed to take pics and left all of the fasteners & everything disassembled together with all the pieces of the weedeater I had also taken apart lol (facepalm)
anyway if you were to make such a video that would be pretty dang handy! But please don't feel obligated
Yes… Says he is use the same type of carburetor that uses pole station of pressure from the crank case to push a plastic diaphragm in and out like a button being matched hundreds of times over that’s what they call a “fuel pump“ for a two-stroke… What a nightmare… I really hope you can get carburetors for this cheap or maybe put a four stroke push mower engine on the shaft
Of course, it still weighs less than a deep cycle battery and a trolling motor. That’s the only reason I would use this instead of an electric trolling motor for propulsion.
Where can I find parts for a 5hp Gamefisher? (Carb kit, impeller, spark plugs, etc.)
www.ebay.com/
How do you put a water impeller on a Eska 9.5 hp I assume you take off the 4 Allen screws on the shaft to drop lower unit
Yes
I might have to $13 fox to the no spark problem. Look up sthil 070 cdi. Looks to be the same components as the Ted Williams just need to make bracket to get them to get the right clearance? I might give it a try
Where can I find a coil pack for a 70s model Ted williams 9.9?
You have to check Ebay
Do you have a link to the connector needed for those motors? All the ones I’m seeing have a 2 prong attachments where’s the one on our motor is a single?
Yes: www.amazon.com/SeaSense-Chrysler-Force-Connector-Female/dp/B000QUB10C
I have no spark in my 5.5 , what do u think it could be
In most cases, there is a bad connection on the external high voltage coil. Clean the ground and positive connectors. If it is necessary, try different spark plug.
@@BoatMotors thanx I’ll try that out
Mine did the same thing. I put a small block chevy condenser on it that I had laying around, started right up!
Can you use anyother carburator on this engine
Technically this is possible, but I don't advise you to do it. Look for better motor.
I have a Ted Williams how do I set points on ignition
This motor is with CDI ignition
I need a coil for my gamefisher 15hp
ebay.com
I just can’t stand that Chinese clickbait robovoice.
If you need somebody to dictate or record your voice overs, please let me know. I will do it for an extremely affordable rate just so I don’t have to hear this anymore. Seriously
Thanks!