Excellent job man! Thanks for sharing! For anyone looking for the hopper at home depot, it's actually a paint cup for hvlp... Model# HDA12300 - Husky 600 cc Spray Gun Cup
How's the upgraded version coming along? Since ur hack is gravity fed I can't imagine it working that well given the small flow diameter of the fitting. Also the nozzle hole spout is not adjustable so curious how the spray looks. I also have a homax texture gun hopper that works well for me but it's a hassle to clean so will want something with a smaller foot print similar to the hack below. czcams.com/video/Qnv7ah3EBEk/video.htmlsi=ojjuzMaxwUY04m66 I too have a Milwaukee m18 compressor. Use it with a small spiral hose and it does the job. I do primarily small patch work and did one recently with a 2ft x 6ft opening. Still working out the kinks with the ez texture though. Also trying to find a sturdy easy refilling bag option if anyone has any ideas.
So I'd like to use this with the M18 Milwaukee compressor, but as you know the compressor is tiny and makes fine orange peel impossible. Any ideas how to make the ez pro nozzle smaller? Or suggestions how to do fine orange peel?
I would spray with full pressure and and about 3’ feet away and just remember that is a small compressor so wait for it to recharge full pressure all the time And you could put a pice of tape on the nozzle to reduce hole And also add more try adding a little bit more water to texture
I also am curious of being able to use the super small air compressors potentially with the 18 volt battery type. I would be using it almost exclusively for small patch jobs in apartment maintenance. I just hate to buy everything and find out it's not enough compressor. How did it work out for you with that small compressor? Is it possible? Sounds like you had a hard time making fine orange peel
I use the Milwaukee 18v with a 12 amp battery for that and works good just remember that because is a very small compressor you are going to need wait for it to recharge
Sure no problem and thank you for subscribing New video is coming soon. Im doing some improvements to the hack and also show how to use it. Thank you again
Jala chido para parches pequeños y touch ups pero si esta muy gruesa la textura si se pone más difícil la neta pero te ahoras buena feria envés de usar textura the spray o bolsas de ez
Nice work!!! That’s a sweet mod
🙏
@@Is-realhandydid you get the fittings at Home Depot too? About to build what you did totally worth doing
@lo0s3_labz I got the paint cup at the Home Depot and the fittings trough Amazon but you could also find them at the Home Depot
Thanks!!!
Just get a hooper at that point. This defeats the purpose of this product
Wow very clever job. Thanks for sharing
Thank you I hope is useful
Excellent job man! Thanks for sharing! For anyone looking for the hopper at home depot, it's actually a paint cup for hvlp... Model# HDA12300 - Husky 600 cc Spray Gun Cup
Thank you for the information really appreciate
Firme Carnal!
Gracias 🙏
How's the upgraded version coming along? Since ur hack is gravity fed I can't imagine it working that well given the small flow diameter of the fitting. Also the nozzle hole spout is not adjustable so curious how the spray looks. I also have a homax texture gun hopper that works well for me but it's a hassle to clean so will want something with a smaller foot print similar to the hack below.
czcams.com/video/Qnv7ah3EBEk/video.htmlsi=ojjuzMaxwUY04m66
I too have a Milwaukee m18 compressor. Use it with a small spiral hose and it does the job. I do primarily small patch work and did one recently with a 2ft x 6ft opening. Still working out the kinks with the ez texture though. Also trying to find a sturdy easy refilling bag option if anyone has any ideas.
Coming soon
Nice bro
Thank you
Where do you get the adapter pre made
I had to guns so I premade it myself
Do you use this for a full room or just patch work?
I use it just for patches
Ok, thanks for sharing. Planning to texture a kitchen remodel and researching now.
No problem thank you for watching
Good luck 👍🏼
So I'd like to use this with the M18 Milwaukee compressor, but as you know the compressor is tiny and makes fine orange peel impossible. Any ideas how to make the ez pro nozzle smaller? Or suggestions how to do fine orange peel?
I would spray with full pressure and and about 3’ feet away and just remember that is a small compressor so wait for it to recharge full pressure all the time
And you could put a pice of tape on the nozzle to reduce hole
And also add more try adding a little bit more water to texture
I also am curious of being able to use the super small air compressors potentially with the 18 volt battery type. I would be using it almost exclusively for small patch jobs in apartment maintenance. I just hate to buy everything and find out it's not enough compressor. How did it work out for you with that small compressor? Is it possible? Sounds like you had a hard time making fine orange peel
I use the Milwaukee 18v with a 12 amp battery for that and works good just remember that because is a very small compressor you are going to need wait for it to recharge
@@Is-realhandy any chance in the future you could make a vid using M18 to do light orange peel? Subscribing either way
Sure no problem and thank you for subscribing
New video is coming soon. Im doing some improvements to the hack and also show how to use it. Thank you again
Smart
Thank you
primo y qué tal jala ?
Jala chido para parches pequeños y touch ups pero si esta muy gruesa la textura si se pone más difícil la neta pero te ahoras buena feria envés de usar textura the spray o bolsas de ez