Ford Transit 2.0 EcoBlue - P20EE AdBlue Efficiency
Vložit
- čas přidán 29. 08. 2024
- Please consider supporting my channel for all the work I put into creating these videos.
www.paypal.me/...
In this video we shall be diagnosing and fixing a 2018 Ford Transit 2.0 ecoblue. The vehicle has an AdBlue Malfunction message on the dash. The vehicle had previously had the NoX sensor replaced and all the codes erased. Erasing codes is not a good thing to do on any diagnosis let alone AdBlue faults. After carrying out a road test, the code P20EE adblue efficiency below threshold was stored, allowing me to carry out further testing
*PLEASE NOTE: This is not an official repair, it is a method that I have had much success with when faced with P20EE or AdBlue malfunction message and no codes*
www.amazon.co....
#p20ee #adblue #adbluemalfunction
SY Diagnostics is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.co.uk .
By purchasing an item via one of these links, SY Diagnostics earns a small commission fee from any sale, this fee contributes towards SY Diagnostics purchasing tools and equipment to help keep making videos..
======================================================================
Please subscribe to my channel and hit the notification bell for updates.
=============================================
/ carlton8571
=============================================
Facebook: / skodayoda
=============================================
eMail - sydiagnostics2019@gmail.com
=============================================
If any one of my videos has helped you out in any way, then please consider donating to support this channel to keep making and improving the content..
===============================
www.paypal.me/...
===============================
Had a hard time before chasing P20EE which i eventually caught just by changing the DPF/SCR. But it made it so hard to chase since i believed there wasnt a PID which showed the efficiency. With help of engineering it was possible to calculate it, but now i see it shows up in OBD mode 6. If i knew this before it would helped a lot. Thanks for showing this
So frustrating when learnt values not reset. Another great video thank you
Nice one Steve, I have to admit adblue/scr is the one area I struggle on not a lot of good info out there.
Interestingly I just did a efficiency fault last week on a mb passed all the tests & the factory guided test last step was a dpf regen even though the fill content was only 12%, so there’s definitely something in what you say about burning the high ammonia content of the scr. 👍🏻
yeah MB is using this crap known as BLUETEC 6
Best way is to delete it lol
SY Diagnostics
Thanks 👍
From Nick Ayivor from London England UK 🇬🇧
Before you do anything, try revving your motor hard, pedal to the metal for 5 seconds, repeat a few times...you may need to do it over a couple of days. It worked for me.
Awesome content as always Stev, keep up the good work 👍
Love this Video please do more of this types of Diagnoses lots of these Fords transits have can issues I just subscribed to your channel Thank You 👍
I think the troubleshooting of P20EE is complicated.
Basically, P20EE detects the deterioration of SCR catalyst based on worse NOx efficiency. But some other factors will also affect the efficiency. For example,
- Filling incorrect AdBlue
- NOx sensor fail (e.g. sensed NOx value is higher than actual NOx concentration at downstream catalyst)
- AdBlue injector fail (e.g. actual injection quantity is smaller than the desired quantity)
etc.
In case of NOx sensor or AdBlue injector fail, the sensor or injector related fault code is also probably detected.
Great video thanks for sharing your knowledge
This short video has been more than helpful! thank you!
Very well explained. Hope to see more videos like this.
thanks for sharing this great tip
Nice one, lots of useful info in there 👍
Information for anyone else having same problem. I had code P20EE with adblue service warning, 500miles etc.
I bought some cheap dpf cleaner. Poured into fuel tank and drove for couple of hours on the motorway at around 2000 revs. That cleared it.
How do you reset the NOX sensor learned values in Forscan?
Amazing diag job as always
And what a faff to sort it out
Thanks for sharing will keep that in mind for the future
All
The best take care
Hi, great video, which scan tool did you use to do the injector test? thanks
It would have been Forscan
@@SYDiagnostics Thanks for the reply, unfortunately my Forscan is not showing an option to test the dosing system.
Thinking about it. That may have been done using ford fdrs as I worked in the dealer at the time
Where is mode 6 found on forscan Steve ? Another good video btw 👍
Great vid. How did you manage to get ad blue injector to squirt in the parts bin? I have forscan and IDS and can't find the option to prime circuit and operate ad blue injector?
I would have used Ford FDRS, I don't know of any other platforms (maybe Bosch KTS) that will perform this task
@@SYDiagnostics Thanks for the reply. O did find it on the IDS eventually 👍
We have this error code on our 2L EcoBlue and it's been in the garage here in Mexico for 2 months now (we're driving our European van from Alaska to Argentina). They replaced the NOX sensor, which they determined was faulty. 4 months ago the DPF/SCR was replaced because it was clogged up. After replacing the NOX sensor, the fault is still there. They've done the 45ml test (it's an official Ford dealer, so they have FDRS), checked all the temp sensors. The mechanics don't know what to do anymore.
I will ask them to do a DPF regen and an extensive road test, hopefully that will fix it. Any other ideas/tests they could do?
if they have fdrs then they should be able to see any inhibitors stopping the fficiency calculations. Could be an underlying issue
@@SYDiagnostics Thanks for the reply. The local mechanics in Mexico don't have much experience with Adblue systems, so that's going to be a tall order I think. I'll go talk to them tomorrow again and see what they're up to.
@@NaickKimhello, did you resolve the issue?
@@alxevg Yes we did, we ended up going for along drive ourselves and reset the NOX parameters. The efficiency went up from -17% to -3%. Then we kept driving until an automatic regen happened and after that the it was around +16%, which was within the required range of 15-50%.
We had the issue come back twice when we were driving under specific circumstances (very low speeds and a lot of starting/stopping), but it went away again on its own after 50-100km. So far so good I think.
I'm having smae issue after a turbo threw all oil in to dpf scr cat. Been out a month now its back with scr efficiency. Had nox sensor. No faults in PCM. Adblue light light will not go out!! Nox too high state no is always present but light won't go out. My guess is all oil has bricked dpf and or scr cat. I'm struggling. Boss has parts cannoned dpf on and have yet to road test it. How do you do test with forscan also which pids do I need to see to monitor. Thanks for any help! Forscan won't let me reset nox values . I may try the autel as all parameters available on forscan have been reset
how much time you used to clear the adblue malfunction light? I am also facing this concern with no code after I replaced adblue pump and NOx sensor.
I have tested for 400-500 km but the light is still stayed on....
After that distance there must still be an underlying concern
@@SYDiagnostics But now there is no code stored.
Also SCR_NOx_LEVEL is "No"
Hi, Got a 2016 Ford Transit 2.2 USR6 engine with the following fault codes:-
P20EE - SCR. NOx oxide level. Catalyst System Efficiency Below Threshold (Bank1)
P229F - NOx Nitrogen Oxides sensor. Bank 1. Sensor 2. Sensor system fault. Values out of range
I done the OBD 6 on the Forscan like you and it shows:-
- NOx Catalyst Conversion Efficiency - Value 27.72% [RED].......... Min = 33.00% | Max 50%
Any idea what might be wrong? I was thinking of replacing the rear Nox Sensor but it is on back order with no back order date given. Ford part number 2285488
These adblue systems are a pain in the a$$. I'm interested to know your thoughts on the two fault codes
I've often ended up changing both nox sensors on these, unfortunately there is no live data to read
@@SYDiagnostics Thank you for the reply. I'll let you know once we replace this rear sensor, maybe it will help someone else in the future.
@@BD-cq8jn are you trying to test the nox sensor? This test and video is for a pressure sensor on a 2.0 transit not 2.2
@@BD-cq8jndid you resolve the problem? I have the same error p20ee I did a dpf regen but still have the same error, I took out the last nox sensor cleaned it but nothing happens, let me know if you change it and you resolved the prob
@@andreibara2257 Hi, yes we replaced the rear nox sensor Ford part number 2285488 and it seems to have cured it for now.
That's not to say that it will fix your fault though. What fault codes does yours have and do you have access to the Forscan? If you have the same two faults as I had then it probably would be worth replacing the rear nox sensor but we first checked the fuses in the engine compartment which were all ok. After we replaced the rear nox sensor we cleared the fault codes and it has been fine - fingers crossed.
Does yours state Bank1 sensor 1 or sensor 2 because there are two NOX sensors
Ford Transit Diesel EcoBlue Engine Scrapped For U.S.
Hello nice and useful videos.Do you have a video where you explain how to remove the interior trim in a Ford Kuga 2018/2019?The trim with the ignition button and the trim around the cup holder roller shutter cover?Thanks
I do have some kuga videos and Im sure that trim is in one of them as part of the strip. Howevr in the video the trim comes off easy near the glovr box, whereas, usually its stuck
So what fixed this an forced regeneration was it
Yes
@@SYDiagnostics thank you have a 2018 passat coming in tomorrow . So will be armed with more information
This one lost me. Understand the end results but I have to watch it couple of times to try Understand what is happening here
Basically I'mshowing that despite the manufacturers procedures stating to carry out a specific road test to re-set the eficiency, often (in the case of these vehicles) I find that a regeneration of the dpf will help the efficiency calculations on its road test. The extreme heat generated burns off the ammonia deposits that limit the scr/dpf efficiency
@@SYDiagnostics ha yes I get that. Ta
crap new cars