Joining Lego 10303 Loop Coaster and 10261 Roller Coaster together to make a Super Roller Coaster!
Vložit
- čas přidán 10. 09. 2024
- We were about to remove 10303 Loop Coaster and 10261 Roller Coaster from the table and go back to building more of the Lego City as there hasn't been a Lego City Update for a while! But when we looked at both coasters, where they were sitting, we thought it might look cool if we joined the two coasters together.
And it does! Well, apart from the different track colours. Let us know if you think it's a god idea to leave both of them together as one big Super Roller Coaster or if leaving them as separate sets would be better? - Zábava
As they work well together, keep them together. The entrance under the track would look really cool. Rip out the second loading area, and use the bricks to build a non-roofed unloading/exit area opposite to the loop coaster loading area, with stairs or a ramp in the general direction of the new entrance. Also, I have no idea how they are attached, but if it's not too much work, maybe you can rip the texts off both coasters and attach them to some pillar over the new entrance to form a large, single "LOOP COASTER" sign.
I like that idea! Having the track go through the loading, unloading area is a great idea. And I should be able to do something with the signs like you suggest! Thanks!
@@brictronic you could also use the panel from the red coaster load area as the load platform button as coasters often have multiple buttons that need to be pressed b4 they can be dispatched
Personally wanna know what sets can be built from having both, seems to be enough pieces to make something unique and interesting
Would it go fast enough to climb up the red hill without the chain?
Definitely not unfortunately. It's a very steep hill, would need a lot more speed.
It's a great creation. it's really amazing.
I hope you can provide your map for combining 10261 and 10303, or issue a video to introduce the operation steps.
We really want to reproduce your work.
When I move the sets to their final position, I'll do a video on how I combine both.
Now join in with the new city robot coaster and make a mega coaster
Can you paint the track of one so it is all in one colour? Also maybe incorporate the pirate coaster? Also you could theme the Loop Coaster to a pirate ship mast or massive wave to go with the pirate theme? Maybe the right hand side you are going through more of a fort or island or something?
Good suggestions, thanks! I don't think the track can be painted but incorporating the Pirate Coaster into the final build was something we thought about, bringing it through one of the loops!
Painting will hurt the traction of the ride vehicle but good thought!
@@JeseeWalkerSurprised someone hasn't come up with a paint that wouldn't.
I would like to see a custom coaster from the two sets
That's something I was thyof doing, just taking them both apart and building something else. I might still do that.
They work so well together - I have 10303 Loop Coaster on my wish list and already have the main roller coaster but not as of yet with the motorised lift hill - in fact I need to fix the lift hill as after moving it something is not quite right - but anyway now as a result of seeing your video I will bring them both together in one big model - thank you :-)
I was going to make one big coaster with both sets but I'm still unsure. I'll wait to see how the fairground area of the city looks with it before I commit.
This looks amazing, much better ride experience now.
Thanks! I've made it a little better but haven't had a chance to do a new video yet. I will do in the coming weeks
Brill! Definetly keep it. If possible add the pirate coaster. Thanks for the amazing work.
Thanks! Yeah, going to try and include the pirate coaster in the mix somehow!
I’m buying the Loop today because I have the original coaster and immediately wanted to join it to the Loop when it came out.
Keep it
Keep it
We decided to split them again and build a bigger loop Coaster! Check it out!
I love this!
Smashing work. Love this
Looks awesome!
Thanks!
I think it would look more like 1 coaster if you could swap the track colour on the roller coaster so it is the same colour as the loop coaster
Yeah, it is a pity they didn't release the new coaster with red track but we're thinking we'll change it all to the same colour in time.
Like a real Rollercoaster.. needs maintenance sometime and than.
wow I like it great idea to see that this works
Thanks!
I can probably do this
Very nice
This is pretty cool. Nice idea
Thanks!
Hey man great werk joining the two coasters and also 4 the advice with the counter balance on the loop .
Go raibh maith agat 👍
Thanks!!
Combine the two loading areas and make 2 long trains
I'd love to do that but the longer cars wouldn't fit onto the lift for the loop coaster. And I think making that lift wider would make the structure a little too unstable.
Keep together
can i check the dimensions in total as i am planning to make one display and buy these
Hi, I've just checked how mine are joined as in Lego City Update 25 and for that set up you need a minimum of 1720mm X 730mm. Depending on your set up, you could make the 730mm narrower if required.
Absolutely amazing!!!!!! I really would love to try this can you make a list of parts and maybe a short video of step by step?
The only parts I used were 2 x 2 round bricks to support the tracks where I joined them. Otherwise, all the tracks were already part of the two coasters. I have ordered some more track and plan to change the way I've joined them so when I do that, I'll post a new video with all the track pieces and how to join them.
Keep it! Add to it!
I just added a few extra tracks and made the link a bit smoother. I think I will be keeping them together but making a few adjustments when I place it finally in the city.
Nice job. Have you looked at third party LED lighting kits?
Thanks! Yeah, I normally use light kits from Ali Express. I have a light kit for the castle and the lighthouse which I'll have to install for when I finish the mountain.
Awesome work!
Thanks!!
Do your adjustments and Keep It!
Yep, I've decided to do that. I have linked them with more track now and it's looking good.
if it Jeeps working then keep it together but if it has a toi important issue on it or an issue you re incapable of fixing then i would sparte them to make two roller coasters seperate
Cool 😎
Great job! Keep up the good job
Thanks!!
Excellent stuff, I would definitely keep them together and having them disappear into a mountain will look deadly. Keep up the super deluxe work/play
But the first ones made of wood and the second one's made of steel
those plastics don't mix ;)
😂😂😂
This is awesome! Are you able to run them off of one motor somehow??
I don't think it's possible to have them both running off one motor but the same power supply can do both motors.
@@brictronic Ah cool :)
Absolutely love this! Subbed
Thanks!
Hi, I am very interest them. I would like to combine them together. So, what's parts to combine them together? Please tell me for more detail step by step.
The only parts I used were 2 x 2 round bricks to support the tracks where I joined them. Otherwise, all the tracks were already part of the two coasters. I have ordered some more track and plan to change the way I've joined them so when I do that, I'll post a new video with all the track pieces and how to join them.
Would you please make a video showing us the step by step how to combine them? Thanks so much
When I get the 1/4 track pieces to make the permanent join and I'm placing the super coaster in the amusement park I'll do a video showing exactly how I join them together.
@@brictronic thanks so much
Good work! When you extend the tracks and separate the two coasters by one extra piece of track perhaps you could build some sort of tunnel for the cars to pass through just before the climb up the incline as if the track went into an underground section.
Good idea! I was thinking of incorporating the red coaster into a mountain but with the orientation of the two coasters together I'm not sure if the mountain would work where I'm placing it but we'll see.
@@brictronic I just had an idea. How difficult would it be to turn the original coaster into a 'log flume ride' through your proposed mountain/forest? If you separated the cars and moced them up to look like tree trunks and then had the 'arrival' area seemingly in a pool with some sort of Technic mechanism so that, when the log arrives, water jets/splashes (or the Lego fountain spurts) rise up automatically.
I like that idea! I was looking at the proposed flume ride on the Lego Ideas page and it looks good. I've rearranged how the coasters connect to each other and I'll definitely be keeping them together now. I'll update with a video on it soon.
take them both apart and make a new coaster
We did consider that, buying some extra track and building an even bigger coaster. That's still a possibility.
Hello, do you have a list of the extra parts needed to join the 2 Roller Coasters together in a loop? I ordered those sets and wish to combine it same as you did
Hi, when I joined the coasters first, the only parts I used were 2 x 2 round bricks to support the tracks where I joined them. Otherwise, all the tracks were already part of the two coasters.
Bonjour oui trouvé le rail gris cordialement
Actually one of my childhood dream to have such a big working roller coaster! How much is the price for all together? I heard the building of the loop is super boring.
The loop coaster is not as boring to build as the red coaster. I actually enjoyed building the loop coaster. All together, it's the price of the two sets plus a few additional bricks. Approximately € 800.
@@brictronic A lego youtuber in Germany complained, that building the the tower is totally repetitve and boring, for a long time. I will see, maybe when I got a good offer for both used sets.. I am thinking about.
slay