DIY | Coleman Generator Needle
Vložit
- čas přidán 25. 07. 2024
- Step into the mesmerizing world of Coleman classic lantern restoration with our latest CZcams video! 🔥
Unleash your DIY spirit as I guide you through simple steps to revive your beloved Coleman lantern needle. 🛠️ Whether you're a seasoned enthusiast or a beginner, our easy-to-follow instructions will have your lantern glowing like new.
Hope this simple steps on DIY Generator Needle able to give you some information and able to illuminating journey and let the warmth of tradition light up your DIY project! ✨
Timecode:
00:00 Introduction (Show the existing needle and DIY)
01:48 Information on Brass size
02:45 Tools for DIY project
04:22 How to dismantle Coleman 200a
08:04 DIY needle
22:09 Reassemble everything
24:07 Fire up
-------------------------------------------
Items for your purchase:
Brass Pipe / Tube 1.0 & 1.5mm: invl.io/clkdd48
Copper Wire Coil Cable 0.1m or less: invl.io/clkdd9q
Once again, thank you for watching
Please do click like & subscribe into SnowMakerTV channel, really need all of your support to make this channel grow. Thank you.
Cheers,
Snow
#DIY #ColemanLantern #ClassicRestoration #LanternEnthusiast #coleman200a #DIYgeneratorneedle #snowmakertv #stepbystepDIY #campingmalaysia #camping #캠핑 #露营
-------------------------------------------
Music by Epidemicsound:
WILDFLOWERS
Rain Is Here
Get yourself free 1 month Copyright music:
www.epidemicsound.com/referra...
Music by Epidemic Sound I just love the music from Epidemic Sound. Suit my taste as a content creator. If you love the music from Epidemic Sound too, do click on the link above and subscribe for one-month free usage. Thank you for your support!
-------------------------------------------
Camera: Insta360 One RS 360 mod & 4K mod.
Sony A6400 & A6700 with Sigma 18-50mm lens, 16 & 30mm lens.
Microphone: DEITY D4 DUO Mic &
Comica BoomX-D D2 Ultracompact 2-Person Digital Wireless Microphone
------------------------------------------
To keep in touch, please click the link below for FB, CZcams & Instagram:
/ snowmakertv
/ snowmakertv
/ snowmakertv
Excellent presentation sir 😊.
Thank you so much, really appreciate that. 💕
GREAT VIDEO THANKYOU!
U are most welcome. Thank you for dropping by.
Great video
Thank you so much.
Thanks for the great vid! I made a new needle rod tonight for my 200a and it's ready as a spare when I need one.
You are most welcome. So happy u have your own spare needle too now 👍🏽💕
Available on Amazon too .
Nice. Thanks for sharing.
Where did you source the small brass tubing ? Can you get it in America or Canada ? Great video .
Thank you so much. I believe you can get it in America or Canada too. Try searching in Ebay key word "brass / copper mesh".
Hello my friend I hope this finds you well.
As usual I am asking for help
Thanks to you I now have the brass tubing 😅
However again I need your help .
The wire for the jet is becoming hard to find in the UK .
GETTING 0.1 MM WIRE IS NOT A PROBLEM.
HOWEVER ITS TOO SOFT EVEN IF I ORDER HARD WIRE.
Could you please ery kindly supply a link for the wire you use .it seems stiffer than the 4 lots I have purchased.
Thanking you in advance .
P.S could you make a video on re coating the vent on a coleman northstar lantern
I believe its coated in Porcelain.
Lol just a thought
Thank you
Take care
Keith
Wigan
United Kingdom 🇬🇧
Thanks for reaching out. The link I provided most likely is for ASEAN region. I believe u able to get it in Ebay as I search & able to find it. The 0.1mm I'm using is softer than the original one, have to do it gentle so that to prevent breaking it especially when clamping the edge between the tube & the wire.
Terbaik
What is this for please help me
Terima kasih sangat. 💕
This DIY video is for the lantern Coleman generator needle. The purpose of the needle is to clean the nut hole, so that the gas able to go through. Hope I answer your question.
@@SnowMakerTV I sorry I said please anyway I understand a little more
Ada cawan SELAM di situ.... 💪💪💪
Cawan limited edition, perlu tunjuk sikit. 😁😍Wow, Abg Bob 1st person notice. Power. 💪
Kemon 💪💪💪
Awesome video for making your own generator needle. Have you found a way to make your own spring that the mesh and needle go on to guide it?
Thank you. I manage to DIY on coil spring for Northstar, the external spring not the internal spring. Shouldn't be a problem, just need different material to create one.
Hello my friend
I hope you can help me
I am in the UK by the way .
I am having extreme difficulty in finding the copper or brass tubing.
Can I politely ask that you supply me with the exact measurements
Outside and inside diameters
I have been searching for
1.0 mm internal diameter
And 1.5 mm internal diameter. Tubing.
Also I have been telling possible suppliers in China I have approached that the smaller diameter must be able to slide inside the larger.
I hope you can help
Kindest regards
Keith .
P.S
Unfortunately the link you sent me did not work
But sincerely thank you for trying.
Hi my friend. Try the link below I stated, is from Amazon. Come with all sizes.
uxcell Brass Tube, 1mm 1.5mm 2mm 2.5mm 3mm 3.5mm OD x 0.2mm Wall Thickness 300mm Length Seamless Round Pipe Tubing, Pack of 6 a.co/d/3Iz6EJI
Sorry, the link I provided most likely mainly for Asean countries. That's why UK not able to purchase it. Reply me if u able to purchase the link I had share.