Airbox breather mod for Aprilia Tuono and RSV
Vložit
- čas přidán 20. 08. 2024
- This is the modification that stops oil forming in the air box of all gen 1 Tuonos, milies and RSV bikes made by aprilia .
If carried out correctly you won't see oil in your air box after this modification has been carried out , and might make it breathe a little cleaner .
It sure is sparkly clean in there, alright. One would expect to see a small bit of oil residue that was left behind from the oil that came up and then drained back to the motor, but not even that bit of left over film? Interesting. I'm more curious about the carbon oil tank, though. What's that all about? Could it be a molded cover or might it be nicely applied vinyl wrap?
It traps the oil and then runs back to the rear head when not in use ,it works well.
The carbon cover for the oil tank yes that was like that when I purchased the bike many years ago I assume a carbon company had made them ,it might offer some scratch resistance if one was to have a little slide .
Did you check the wheel bearings on the Capo yet? Perhaps that might be worth a vid!
We'll sort off just a.quick check last month when I had the wheels off for a tyre change .
Never heard of that problem before, is it a big issue, had my bike serviced and its never been mentioned.
I've had it happen on all of mine even the caponord it enables you too run the proper oil level also .
@captbarb6642 many thanks for that, dam another job I need to sort, bloody bike is a nightmare 😳.
@@paul8161 trust me if you do this mod , you shouldn't see any oil in the air box .
The engine might even run a little cleaner also , it's a really good mod to do.
@captbarb6642 OK sounds good many thanks.
You wouldn’t have a photo of the cct board for the capo clocks by any chance would you?
Bit of a
mare with mine, just about to change tthe voltage regulator chip but the clocks have been previously dicked with and Im looking to see why the modded some connections!
Night-mare!
photos.app.goo.gl/bUbX4yfFUCrp2wdAA
I hope this works apart from my vid this is all I can find .
Thanks fella, I have a detailed pin out for the power regulator chip and a supplier, the only thing I dont have is a pick of the original connections; there’s some connections that don’t make sense to me yet..
I’ll do a vid if I am successful . Thanks again.
@@pardonwhat best of luck I wonder if it worth looking at some of these other cheap dashboard on the market if it was one that could be calibrated to the capo sensors and inputs it might be the way to go
Do you know anyone who has done that?
@@pardonwhat no I don't but I think maybe a search on Google would show it has been done