Self starting Thermoacoustic heat engine
Vložit
- čas přidán 7. 09. 2024
- In an attempt to improve the efficiency of my thermoacoustic heat engine, I made a taller engine with multiple cans. I tried to test the impact of different sizes of aluminum support structure on the performance of the engine, but the results were not conclusive.
I figured out that it is important for the engine to have water vapor filled the whole volume. To achieve that I created a second hole on top of the engine so that when water is injected from the lower section, the vapor fills the cylinder and excess pressure exit from the top whole.
This structure to my surprise resulted to a self-starting thermoacoustic engine, which is fantastic.
Finance: N=61
subs=2162
Available budget (N): 2162-100-61*(61+1)=-1720
Storage limit: 2^ln(2162)=204,90
I think that by injecting water in the bottom and letting the steam rise through the cans and out the hole in the top, the steam pushes out all the air. This insures that what you have in the engine is a "saturated vapor". No air. All steam. The expansion and contraction ratio of steam (water vapor) when it changes phase, evaporating and condensing is several orders of magnitude greater than air.
Thank you for your persistence and dedication and generosity in sharing what you have discovered.
Yes this sounds plausible, I think so too.
I have watched those videos so many times
i dont know why youtube recommended this... but I ain't complaining. I'll be the first to say this, this channel has a bright future
Thank you
High friend :) thank you for the video and demonstration :)
an enclosed system where the water evaporates and then condensates back to the bottom would be very interesting. .
Indeed, that I have had in mind since a while, It requires some sort of piping to direct the water from the top to the bottom of the engine. In this current format the water droplets will not pass through the glass beads barrier. I am working on a solution
@@HVE a cooling jacket on the top may help a lot.
@@HVE 1.bp.blogspot.com/-5Ua7opwlOfU/YKsJKwA2rQI/AAAAAAAAFng/lmK9FbA347E-5Ia9Im9Za_1WTjiYOg4AwCPcBGAsYHg/s476/egyszeru.jpg
Maybe instead of the glass beads rice of whatever you can use cooling pipes to condensate the water vapor more abruptly, thus they pass the barrier and heat the floor.
@@sierraecho884 that would be the same as the stirling cycle, but with moisture instead of atmospheric air or helium.
fantastic!I think this is the most interseting vedio of thermoacoustic heat engine.😀Hope to see more.
Thanks Yiming, more will come 😀.
Very cool! Thanks for the demonstration and info. How would one transmit the energy from this engine into usable power? And then how much power would it be?
have you tried poking a very small hole in the balloon and the location of heat being introduced is critical to the standing wave
This would weaken the balloon, a pressure valve which can be set to different pressures would be best, this way you can set it once and forget about it without weakening anything.
Do you think it matters whether cold water is injected after the reservoir is initially heated? I built your engine and managed to get it running really well, but I find it really difficult to get it started. The reason I ask is that I don't have a syringe on hand so I've just been filling the reservoir before putting it over the stove. Based on your videos, my best guess is that a flash of steam from adding cold water is what gets it running more easily since that's the only thing I'm not doing. By the way, I was able to run it at high speed without the steel wool but instead with the upper can having a bottom with holes drilled into it so that it can hold the rice. A mesh might work better. Maybe you'll want to try that and see how it goes? You've really inspired me here, so I'll keep experimenting. Thanks!
Thanks for the comment. As a matter of fact after lots of experimentation i eventually decided to get rid of steel wool because no matter what i did, it get rusted and destroyed after several days of operation (which is obvious due to the water in the engine). I used a stainless steel wool and glass beads which works as good. I will try now without stainless steel wool and if that works then the internal part of engine will be totally robust. Very good idea to create whole on one of those cans, I will try that, thanks for the idea. Regarding the adding water directly into the engine, I assume for your case the temperature will not go really high because water is there always, for my case the temperature of bottom of the can be several hundreds of degree and the water just play as the medium to increase heat transfer thought the engine. that is the difference i guess
@@HVE Thanks! Actually, I think I figured out why I had trouble starting it. I've been holding the engine with my hand because I don't have an induction cooktop, affecting the resonant frequency and preventing it from starting. Once I set it down on a firm surface it starts on its own! I also replaced the rice with smooth aquarium gravel and that works quite well.
@@tenbitcomb Indeed if you don't have it on a firm surface it will have very hard time to start.
@@HVE ⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
Mine is not working at all what can be the reason? 😭
How far up into that tall engine does the steel wool go? Is the entire top 2/3 of the engine empty? Also, did you test the parameter of how much of the glass beads you should use for best performance?
I bought new glass beads with larger size, i will check how the size of glass beads and the amount will impact.In the blue engine that i showed, an aluminum can of ~5cm is used and on top of it ~6 cm of steel wool and thereafter 2 cm of glass beads. so maybe top 1/3 is empty.