John Deere 1025R driveshaft U-joint grease Pro Tip!

This greasing tip can save you a lot of hassle when the 50 hour service rolls around on your driveshaft universal joints.
Thanks for watching and please subscribe!
Work safe!

[@davidfox363]

Wow! I wish I had seen this before I went through this process last week. I'll follow your method next time. Thanks.

[@pmtips4482]

Thank you for watching!

[@desmo8755]

Good tip, but do yourself a favor and just access that grease zerk from the top ( engine shaft front joint, otherwise accessed through that small hole beneath). May not be accessible on newer machines but if it is … remove hood side panels (easy) and the lower console cover under the steering wheel (sits on floorboard) also easy, just 4 phillips screws, whallah there’s that pesky ujoint. Not only is the zerk easy to reach you can see the grease coming through so you know you got it.

[@pmtips4482]

I'll check that out!
Thanks for watching!

[@SeaDog-qu8cx]

This is the video! So easy to turn the flywheel with a big screwdriver. Clicking the key and rolling the dice can work. But, I just did that about 10 times before coming in and finding this video. Marked the flywheel to the frame. No sweat. Excellent video! Thanks! The Dog

[@pmtips4482]

Thanks for watching!

[@sartainja]

Genius.

[@chuckeecheese162]

When it’s 180 off I just click the key and roll the dice. It’s better than fighting it all the way around.

[@pmtips4482]

It sure is! Thanks for watching!