McCulloch 110 goes for a fly!

Sdílet
Vložit
  • čas přidán 25. 05. 2020
  • Fun job we did! At first we wanted to drop everything, but with how steep the ground was we were afraid of things rolling and ending up places we did not want them. We could have butt tied and rigged things, but climbing was the end result. In total we removed 3 pines and cleaned up a nice fir. The funny thing about that 110 is when I picked it up there wasn't a scratch put on it. Go figure! They can make the blood boil, but even the little McCulloch saws have a sound to them! Music is by Santana "do you remember me"

Komentáře • 45

  • @yangkevin4965
    @yangkevin4965 Před 2 lety +6

    Looks like you put the Mac on/off switch off when you try to start.

    • @jimhurricane5831
      @jimhurricane5831  Před 2 lety +2

      You caught that huh?! That’s exactly what I did! Saw that later in the video and started to laugh thinking well at least I know why it didn’t want to start.

    • @mil-specmotorworks7805
      @mil-specmotorworks7805 Před 3 měsíci

      I noticed the same thing it gets confusing on the Macs so when I shut my switch off I immediately turn it on so I don't forget, and my new thing is turning the choke lever to shut it off , but I don't know if I like this method yet

  • @DeathByNature23
    @DeathByNature23 Před rokem +1

    I just got a free eager beaver 2.0 not running, removed the wick fuel filter and it runs like a top!!

  • @paulstranc8951
    @paulstranc8951 Před 3 lety +3

    That Mac 110 chainsaw sounds good for that job cutting that pine tree looks like a 12 inch bar on it good work dude

  • @Syncop8rNZ
    @Syncop8rNZ Před 4 lety +10

    I'll subscribe if you turn the music down a bit.
    And keep using the 110.

  • @scotttam7491
    @scotttam7491 Před rokem +2

    I run my eager beaver all the time when I first got it I had carb trouble but only when I turned it on it’s side anyway I fixed it. I love that saw guys are allows laughing at me when I pull it out but it keeps on cutting I have other climbing saws but for some reason I like using that old saw

    • @jimhurricane5831
      @jimhurricane5831  Před rokem

      I enjoy running these saws as well. Haven’t ran one in a spell, but they can cut just the same as any other hand saw out there.

    • @JakePlisskin12
      @JakePlisskin12 Před 2 měsíci

      I love my mini macs. Their great little saws. Have a fury eager beav, 120, 110, 35, and a 25. All work great. Use the beav and the 25 mostly. That 25 is so light and rips. It's way smaller than the rest. So it's great for climbing.

  • @mil-specmotorworks7805
    @mil-specmotorworks7805 Před 3 měsíci

    I noticed your Mini Mac is very sluggish, mine definitely rips compared to yours. But either way it will never compare to my 200t with a simple exhaust mod. The 200 t is an absolute monster I would highly recommend it, ergonomically it's perfect too.

  • @randywolfe44
    @randywolfe44 Před rokem

    I had a mcculloch like that it was great first tank then after you refueled it, it would not start. I chalked it up to vaper locking somehow. Let it cool all the way down and it's was good to go.

    • @efrenvenegas5074
      @efrenvenegas5074 Před rokem

      Damn

    • @boombob10
      @boombob10 Před rokem

      I have one that after a 2 or more tanks it will starts to bubble/boil the gas in the tank. It does the same vapor lock no start

  • @petergriffin9467
    @petergriffin9467 Před 4 lety +2

    If you do some carb work it would start. Mine starts up perfect

  • @paulstranc8951
    @paulstranc8951 Před 3 lety +2

    He should of used the Mac 110 on the whole Tree including the Stump

    • @paulstranc8951
      @paulstranc8951 Před 3 lety

      He should also used this Mac 110 chainsaw on cutting 1000 big logs and plywood and old and new firewood and Doors buuy The way he should of used it on all 3 pine trees including the Stump

  • @matthewnelson3578
    @matthewnelson3578 Před rokem

    My father bought me that exact saw when I was 13 years old as my first saw. I don’t know what ever happened to it.

  • @paulstranc8951
    @paulstranc8951 Před 3 lety +1

    He should also be able to use this saw to cut plywood to build a house and a pool deck

    • @paulstranc9619
      @paulstranc9619 Před 3 lety

      He should of put fuel in the Mac 110 chainsaw And continued to use it on the Whole tree including the monster stump instead of the sthil

  • @aflatminor
    @aflatminor Před 3 lety

    Did you get the li'l Mac repaired?
    I have a Mac 130, Only yesterday I said that it never failed to start in twenty years, Got it out today and the recoil pawls jammed! 🙄
    On an upper I got an old Mac 335 running after ten years in the shed!! 👍

    • @jimhurricane5831
      @jimhurricane5831  Před 3 lety +1

      Funny thing is that the next day it fired right up!! I hate to admit it but if you watch the video I had the kill switch in the wrong position I’m pretty sure🤦‍♂️ Didn’t say I was smart!

  • @yrdGBA
    @yrdGBA Před rokem

    loved the music and the 110 , she flys ahe?

  • @paulstranc8951
    @paulstranc8951 Před 3 lety

    Also Keep on using the 110 on cutting out old lumber and old stuff like old door's

  • @JakePlisskin12
    @JakePlisskin12 Před 2 měsíci

    Seems like you ran out of gas.

  • @AlexRodriguez-oh5eo
    @AlexRodriguez-oh5eo Před 4 lety

    What bar you running? Skip tooth chain or full comp?

    • @jimhurricane5831
      @jimhurricane5831  Před 4 lety +1

      Full comp low pro 3/8 half chisel chain. Don’t remember the gauge of chain but I believe I was using a a 14 inch bar on these trees.

    • @AlexRodriguez-oh5eo
      @AlexRodriguez-oh5eo Před 4 lety

      On the McCulloch correct?

    • @jimhurricane5831
      @jimhurricane5831  Před 4 lety

      Yup!

    • @AlexRodriguez-oh5eo
      @AlexRodriguez-oh5eo Před 4 lety

      I run a 14 inch bar skip tooth with port job and some timing and it rips just like a 200t

    • @jimhurricane5831
      @jimhurricane5831  Před 4 lety +1

      Right on! I’ve never seen one of these ported but I would imagine that they would wake up quite a bit!

  • @miguelbarrera1031
    @miguelbarrera1031 Před 5 měsíci

    Is that Santana that you a listen to?

  • @alexdesjarlais5253
    @alexdesjarlais5253 Před 3 lety +2

    Might wanna stop turning it off when you start it.

    • @stv9906
      @stv9906 Před 2 lety +3

      Indeed!!! The red switch is "on" in the upper position!! He was looking for a poor excuse to show off the plastic toy from Germany! Hahaha!!! Nice video never the less

    • @jimhurricane5831
      @jimhurricane5831  Před rokem +1

      That’s awesome!! I was hoping no one was going to catch me on trying to start that saw in the off position! It’s funny how it started right up after switching the switch the right direction when I got out of the tree😂

  • @guypatts494
    @guypatts494 Před 2 lety +1

    U couldn't just drop the tree

  • @liamb.6251
    @liamb.6251 Před 3 lety +1

    Might do some good to pump some oil once in a while, they arent auto Oilers bud

    • @gotchurebeacons-gaming9023
      @gotchurebeacons-gaming9023 Před 3 lety +1

      My Mac110 has an auto oiler. I just did a full refurbishment on mine and it still works great, too.

    • @liamb.6251
      @liamb.6251 Před 3 lety

      @@gotchurebeacons-gaming9023 what year is it?

    • @gotchurebeacons-gaming9023
      @gotchurebeacons-gaming9023 Před 3 lety +1

      @@liamb.6251 It’s my father in laws, not sure where to look to tell you...but it definitely has an auto oiler...and also a manual plunger in case you need to give it a boost. It had been pumping way too much and was making a mess of everything. I figured out which was to turn the set screw to reduce the oil output

    • @liamb.6251
      @liamb.6251 Před 3 lety

      @@gotchurebeacons-gaming9023 huh

    • @jimhurricane5831
      @jimhurricane5831  Před 3 lety +1

      My minis also have auto oilers. Rebuilt a couple of them and messed with the oiler adjusting screw; all I can say is a little adjustment goes a long way on these little guys😂