Apa itu Valve Clearance | Inspect and Adjust for Kymco Like 200i, KDT 200i, KDT 300i, Superdink 300i
Vložit
- čas přidán 7. 09. 2024
- Cara mudah untuk adjust tappet untuk Valve Clearance.
Simple step to do Valve Clearance for Kymco Like 200i, Kymco Downtown 200i, Kymco Downtown 300i, Superdink 300i.
Enjoy the CZcams video.
Terima kasih tuan berkongsi video DIY ni, dah lama teringin nk buat akhirnya hari ni baru berjaya...
Thank you for perfect video with step-by-step instructions also for dummies - like i am :-)
Great video I have a question does these valve adjustment specifications apply to the Kymco People GTi300 as well ?
Thanks for the video 🤜🏽...
Thank you very good video !!
Huii... Banyaknye screw
Hahaha
My Downtown is very noisy when cold so I decided to adjust the valves according to your video. I followed all the steps and placed it at top dead center precisely and adjusted the gap to 0.10mm. But the noise got much worse. What could I have done wrong? Details, it has 33,000km.
you took bread from mechanic's mouth, lol... maybe it was not top dead center, also have you chacked valve clearance before you unscrewed it? how much was it??? 33 000 is not little, maybe you should check compression and start from there... also oil can drastically influence engine sound, try different brand or gradation (but only when everything above is dealt with first)
Lanhutkan broo
Thanks
Mana nak cari sparepart Kymco downtown 200i ye saya tengah cari headblock sbb dah retak
Shopee atau di Man Sheng Jalan Pudu
I think you're wrong. You don't have to align the "T" to the mark, but the mark on the flywheel besides the T
kalau utk ME250 berapa ukuran dia..0.04 juga ke
Nak tanya mana saya boleh dapat headblock kdt 200i
For kymco downtown 300 service manual tell about 0.12mm for all valves
my kymco 300 says 0.1mm it depends what year the model is from i guess... newer have 0.1 as much as i know, at least for people gt, people 300s and mxu 270cc (basically all same engines, but there are differences)
kalau bunyi engine tapping noise masih ada, is it the auto cam tensioner problem?
most likely mas..
Is it really necessary to unplug the battery? For what reason?
no it is not necessary, but do not turn on ignition as long as you work on the engine....
Motor kymco downtown saya pagi2 nak start susah.. nak kena throttle aru boleh start... abih lepas dah start, bila move off je, mesti stall... kenapa ye? Nak kena tunggu jap aru panas kan sikit baru bergerak.. kalau tak mesti stall motor nya...
Cuba buat setting mcm video ni... saya pun sama kes... buat valve adjustment baru ok..
will the engine 'tell' me when i need to do this? i have 300i
when your motorbike has difficulty to start in the morning with good battery power.
@@Adv9000 so have you noticed any change in sound or anything, after you set them? i have 10000km now, manual says i should do it, but everything works perfectly... i guess i will just check them when i find time
On how many kms do they need adjust ?
normally every 20,000km but it depends..
Tutup bengkel shah alam kalu gini...
Lorrr...