Hello brother i kind of have a problem with my epson printers, my epson 365 when turned on, it seems ok with no error, but when you print anything, the paper is picked well into the printer, then the ink and paper lights starts blinking, and the paper stops and nothing is printed, the head moves freely , then it displays 'ERROR 9F' ON THE COMPUTER, plz anyone what is the problem, the gears are perfectly well
hi.did you do visual inpection inside the printer.?check the encoder disk if it was perfectly aligned,also the cr motor.check maybe there is some object inside that will cause an error..and lastly check the clutch spring far right of the printer.
@@alberttechchannel7250 OK, I dont have USB cable with me since I was using printer with Wifi. Let me bring it and check once again if this communication errors persist.
@@alberttechchannel7250 hello Albert, I got the printer cable and then everything happened smoothly as you mentioned in your video. Along with this i removed the inkpads and washed them properly and reinstalled them back. Thank a Million.
mechanical error yan sir.check mo yung encoder disk,encoder strip,and cr motorcheck mo meron tayu other videos sa channel na mechanical error.hope ma solve yung problem mo.
Hello tanung ko lang po kng bkit po nageeror yung printer ko epson L360 pgpinundot ko yung xerox hnd nagreresponse pagmagscan nman po akoageeror pag magpprint nman po kakainin nya yung papel tas mageeror anu po kaya problem tas pag unang bukas ng printer wala syang eror nakaready to print sya
pwedi din flex.end to end tester nyu po.continuity mode dapat meron beep sound both ends side means connected.but kung wla potol yung flex.need replacement.other component also check,cr motor ancode desk
Thanks bro, its worked for me.
Hello brother i kind of have a problem with my epson printers, my epson 365 when turned on, it seems ok with no error, but when you print anything, the paper is picked well into the printer, then the ink and paper lights starts blinking, and the paper stops and nothing is printed, the head moves freely , then it displays 'ERROR 9F' ON THE COMPUTER, plz anyone what is the problem, the gears are perfectly well
hi.did you do visual inpection inside the printer.?check the encoder disk if it was perfectly aligned,also the cr motor.check maybe there is some object inside that will cause an error..and lastly check the clutch spring far right of the printer.
Good
Thanks
this program gives me communication error. Can you tell me what went wrong.
My printer is connected with my computer using wifi
can you try first try to used usb cable.to isolate the problem..communication error usually occured when you are in epson resetter.
@@alberttechchannel7250 OK, I dont have USB cable with me since I was using printer with Wifi. Let me bring it and check once again if this communication errors persist.
@@alberttechchannel7250 hello Albert, I got the printer cable and then everything happened smoothly as you mentioned in your video.
Along with this i removed the inkpads and washed them properly and reinstalled them back.
Thank a Million.
your welcome..
panu po kung parehong switch buton at ink ung sabay nagbiblink, error parin po lumalabas
nagtry narin po ako magresetter at magbaklas wala parin po ngyayari nagbiblink parin
mechanical error yan sir.check mo yung encoder disk,encoder strip,and cr motorcheck mo meron tayu other videos sa channel na mechanical error.hope ma solve yung problem mo.
or you can dm me para ma assist kita
@@unwanted713naayos mo ba to sir?
Hello tanung ko lang po kng bkit po nageeror yung printer ko epson L360 pgpinundot ko yung xerox hnd nagreresponse pagmagscan nman po akoageeror pag magpprint nman po kakainin nya yung papel tas mageeror anu po kaya problem tas pag unang bukas ng printer wala syang eror nakaready to print sya
marami po factor na titignan natin.check sensor,feeder,encoder disk..search nyu po sa channel may mga videos tayu for your reference
Kuya, okay nman mga spring, bago yung scanner, pero mechanical error parin.. pa help po.. salamat
sa mga ganitong model minsan sa baord ang problema.paano.lumabas mechanical error after mag initialize or before?
@@alberttechchannel7250 after po
@@alberttechchannel7250 npalitan ko na ang board ganun padin po
First time ko naka ranas ng ganito
hindi vah noisy or mabagal ang takbo ang cr motor?try mo oakitan cr motor then last kung may spare printhead
ano kya issue skn gnyn din pero n check n iba ngtry ako mgolit ng head gnun prin possible kya flex dn?
pwedi din flex.end to end tester nyu po.continuity mode dapat meron beep sound both ends side means connected.but kung wla potol yung flex.need replacement.other component also check,cr motor ancode desk
@@alberttechchannel7250 okay sir linis lng ng sensor ung nsa board
Sir may tanong po ako
Blinking din same diyan
Kaso walang gumagalaw maski yung print head walang nagiinitialise
Posible bang board problem
check wastepad counter sir full nayan reset lang..gamit ka po resetter..or kung ok ang wastepad check encoder disk,cr motor and belt.
Same din kami sir gumalaw lng kunti ng print head umikot kunti tpos blink na ulit ok nmn po lhat
sundan nyu oang po