Lexus Is300 (02-05) Bee*R Rev Limiter Install
Vložit
- čas přidán 9. 07. 2021
- Install video on my 2002 lexus is300 imma link a few photos and websites that i used
Bee*R Settings rev1 C, rev2 3, gain A
Purchase Bee*R:www.nengun.com/bee-r/rev-limiter GET TYPE B FOR TOYOTA
Photos: drive.google.com/file/d/1VqdU...
Fake Bee*R video: • Fake VS Real:Fake BeeR...
Bee*r Forum: www.my.is/threads/diy-bee-r-i...
ECU Pinout: www.my.is/threads/02-is300-ec... - Auta a dopravní prostředky
I'm trying to install this on a 99 Lexus es300, I can't find an ecu pin diagram for it. Any clues on what color wires I'm suppose to tap into?
Anyone know about the 4AGE 20V black top setup?
6:55 when you come back from chipotle
How to wire for all cars
--------------------------
R power (battery)
B Ground (battery)
Y Cam Sensor
G crank sensor
W switch (option)
I’m trying to do this on a sc and it’s the hardest thing I have ever done still can’t get it
Can this be set up on a v8 engine?
Installing one and it is on on all the time. The switch doesn't even have to be hooked up. If I turn the gain on its constant. If I turn the gain off its normal. Any ideas?
yes need help
How do you go about routing the wiring into the cabin?
Through the main grommet on the driver side into the center console
So cat for flames ??
I have mine on and it won’t 2 step it just redlines and the light come on when I redline it how to I do the 2 strp
Make sure your gain is turned on
What switch is it
For some reason mine started to act up. I used to have it on the low end and itd shoot crazy flames till the cat shot out the exhaust lol and after that it stopped working where I used to have it. so now I have it on the higher end and it pops stupid loud which is pretty dope but it don’t do it constantly anymore like yours do. Any suggestions
I messed around with settings for 30 minutes till I found one that the car likes
You need headers dog
@@RubMySchmeat you got any videos?
@@heavy_hittahz no I don’t just buy some catless headers from eBay and you’ll be straight
How long did it take for the cat too shoot out im in the middle of doing the work for it but have my cat on I have headers but am worried about this happening to me
how come on the IS it doesn’t go full automatic machine gun mode with the pops instead it does like a few pops then the rpms fall down for a second then a few more etc?
Because that's how a bee*r works and what you described is an anti lag system two different things
@@327Performance i’ve seen lots of videos of bee r’s and they all sound like a machine gun but mine lags
@@327Performance mine did. i had to turn the gain up and the higher you went with the gain, the more pops came with it😅
@@327Performance just adjust the gain knob for a more aggressive bang
do you recommend a 2 prong switch instead of 3?
Yes get a 2 prong
Hey man i wired this up pretty much the same way you did bar using the main wires to the ecu and running the main wires back to the box in the cabin and splicing from there i know, it was worse than it sounds to fit up but my question is every time i turn the rev dials the engine seems to want to stall because the bee r activates and cuts my fuel ? Surely this isnt normal ?
It shouldn't be doing that if it's on switch
@@327Performance would you know why it would be doing that cuz I'm pretty sure I've got it exactly as you said I've read other people switch green and yellow wire around but they say their car stalls mine doesn't die but does almost stall
Does it matter what type b Toyota one you get? There’s a bunch for different cars
Doesn't matter just make sure its type B
what type of wire extender do you get to run from your ecu to the bee r wires?
16 gauge wire from any parts store
@@327Performancecould i use a 14g? Or will it mess it up
How long is the wiring harness on it? I have an AW11 MR2 and am curious if I'll be able to mount it inside the car or not lol
I have mine mounted in the car, it should be long enough the only 2 wires you'd need to extend are the 2 ecu wires green and yellow
@@327Performance how do you extend your ecu wires?
@@jamesxay7478 you don't need to just extend the bee*R harness
@@327Performance what type of extender wires do you get for the bee R harness
also how do you go about splicing the wires? do you just heat shrink it? how do you do it, wondering because I wanna install myself because a shop wont do it
Does it matter which type b for Toyota I get for 2002 Lexus is300
it should be all the same
Hey I wired mine up but it’s not working the red light come on but no 2 step
Make sure the gain is on
@@327Performance it is I have a 03 auto , any difference??? I’m gonna re wire everything
Hey hoping I get a response I’m trying to find a ground side switch I installed it with a normal toggle switch not sure if it’s a bad switch yet or not just had the problem today as I installed it over the weekend just curious if u know where to find one
Autozone, make sure it's 2 prong
@@327Performance I got it working right what settings was working best for u ??
Hey i wired mine exactly as shown except i wired into the ecu for 12v and ground and white wire to clutch switch but it’s not working at all i got the type b from nengun any advise?
It could be your 12v power source, also it's a ground side circuit for the white wire . I'd check all circuits to be functioning with a multimeter
@@327Performance i will check and get back to you thank you
@@prodigy7810 I personally use the 12v and ground from the cigarette lighter
@@327Performance what do you mean by ground side circuit for the white white
@@prodigy7810 the circuit gets completed by activating the ground, I have mine going to a switch white wire on one side other side is chassis ground
does it matter which type b you get? since is300 isn’t listed i wasn’t sure which vehicle model to go with
No because type B works for toyota and Lexus Vehicles
@@327Performance gotcha. i appreciate it
@@ambiance9695 I have one for sale on Facebook marketplace
@@327Performance is it under the same name as your CZcams account?
@@ambiance9695 find me on FB Daniel Kuzik and Message me
on 5:31 middle red wire you said goes to white bee r wirr then on the diagram ylu wrote with the switch the positive goes to white wire on bee r
i got confuse on that one
so on the switch middle and positive goes to white wire on bee r correct ?
@@jeffersonbagain8358 you just need a 2 prong on off switch that's why I got confused with the 3 prong
@@327Performance so on the two prong switch one wire goes to cigarette negative wire then the other one goes to white wire on bee r right?
@@jeffersonbagain8358 yes correct
@@327Performance thanks bro
How do you have no check engine but a straight pipe ? U have cats?
Check engine is on, no cats full straight
@@327Performance did u have to buy any extra wires or anything I’m going to order one for my 01 I’m not the most handy with wiring and shit like that
@@MaxxPitschke so for 2001 you need to look up the wiring diagram for ecu pins, 16g wire about 10 ft is all you need
@@327Performancecould i use 14g wire or it would have to be 16g i currently have 14g in my car and the rpm’s would rev up bang then the whole rpm’s drop down and pauses
does this still work even tho my is300 is automatic
Yes I'll work on an auto, but you'll have to wire the switch to your ebrake
will this work on a 1uz v8 in a 98 lexus gs400
Yes you'd just have to find the ecu wires
@@327Performance hey i got it working but the rpm isn't correct when i rev it. any idea why?
So on the wires on the ecu are you just splicing into them or cutting them completely to add the wire from the bee r?
did you ever find out😭
do you need to be full cat less for flames?
Yes otherwise you'll ruin your catalytic converter. The flame cant reach past it
@@327Performance how do u pass smog?
@@chrisguerra4611 I'm in a state with zero emissions
@@chrisguerra4611 he don’t 🤣
cant get the swithc to work any ideas?
Make sure the switch itself works first
it's a 3 prong but when you flip it on or off it does nothing
@jamesxay7478 make sure it's on the middle one and an outer one
Let me know to because I have a Lexus IS300 2001
Just different ecu pin outs
Whats the settings....... the knob......
How aggressive the 2 step is
Hey do you know what pin out from the ecu is for the automatics
It's should be the same 02-05
The only one that's different is 2001 model ecu
@@327Performance yes I have the 2001 ecu so I’m wondering if you know what ecu pinouts it is
@Grampa Thanos I don't have the 2001 ecu pin out , but all you need to find is the IG Fault pin and Crank position Positive
@@327Performance thank you very much
Hey man, does you're engine have a turbo or not?
Right now its NA straight piped
@@327Performance Alright! Because all videos of these 2 step things they've had a turbo so I thought it would like damage the engine or something if you didn't have it. But alright then I know! Thank you, sick car btw
@@Vidarx2 thank you! , with turbo you get better flames , the only thing I saw differently is it burns oil sometimes on 2 step so just watch your oil level
how do i install it to a 3sge
You would just need to find the ign fault wire and crank sensor wire
@@327Performance estás usando fb?
Do you have catalytic converter
No
which car did u buy it for?
All toyota based cars are the same type
Hey man I was wondering if you could send me the website I can buy the legit one. I liked video and subscribed.
Yes I'll link one shortly
ok updated it type B for toyota/Lexus
@@327Performance which one did you pick?
@@lonelytl3073 I did the JZA70 Supra but it should matter as long as its type B
@@327Performance okay, thank you 🙏🏾
Is the car running good still? Any issues?
No issues, running perfectly
@@327Performance good to hear! I just installed it yesterday ( btw thanks for the video) do you use yours all the time? I’m having so much fun with this but don’t wanna risk hurting the motor.
@@SSRAdventuresMotovlog I just not all the time but I will say the hotter the exhaust gets the bigger the flame
@@327Performance gotcha. And also when hitting the 2 step it’s caused an engine light it was for a cam positioning sensor. Did that come up for yours as well?
@@SSRAdventuresMotovlog never happened to me
Is original Bee R??
Yes from Japan
Can the Bee R installed on ls400?
Yes its rated up to 8 cylinders you just need the wiring diagram
maybe a stupid question but will it work on an auto is300?
Yes will work on a auto