A step by step guide on how to wrap your kitchen doors and worktop using self adhesive vinyl film
Vložit
- čas přidán 11. 03. 2023
- A new kitchen can seem very pricey and what if your doors and worktops are in good condition? why remove them? here's how you can rejuvenate them using d-c-fix self adhesive vinyl film.
We hope you find this step by step video useful and note lots of tips from a professional kitchen wrapper used, it's not so hard with a bit of know how!
We stock almost the entire range of d-c-fix vinyls in all sizes, check our website and order samples if you need to check colour/texture first (always recommended), go to www.createyourworld.co.uk - Jak na to + styl
You didn't show how to apply the vinyl to the the most important and difficult area which is where the two kitchen worktop panels join at 90°.
Hi yes it's shown on the video how to do this, overlap the vinyl by 2mm at least and trim the vinyl
@@CreateyourWorldLtddo you suggest laying the perpendicular piece over the top of the slight overlap, or try to cut it precisely to butt up against the other piece?
The video doesn't show you laying the final piece.
Just ordered 8m x 67.5cm from you!
@@richardsanderson1448 you need to slightly overlap it by a few mm
Do you have links for the products used? Where can I buy the counter top paper where it comes in such a long piece?
Hi please visit our website www.createyourworld.co.uk thank you
How long it last??
What spray would you recommend to clean them before applying vinyl?
avery surface cleaner
Wait whhhaaat
This is the guy NOT to let in your kitchen. 😂 OMFG what a mess on corners , not even talking about back side of doors . And he shows it on internet 😂😂😂😂😂😂 Fair play if you get customers 👍👍😆🙈
Can I pay someone to do this for me please
We only supply the vinyl, there are kitchen wrappers on Facebook who could help you
What area do you live in if you haven't already done it 👍
This guide is awful as most cabinet doors are not a completely flat design.
lol well it’s not an awful guide though is it - it’s just showing you how to do it on flat cupboard doors, just find a guide where they’re not flat if that’s what you want?