3D Print - Diorama Part 2 - Elephant
Vložit
- čas přidán 21. 11. 2018
- Part 2 of the Diorama Series. We are printing the elephant! Took a little over nine hours to print this one. Join me as we locate, setup, print and clean up this elephant to get it ready for the Diorama project!
Filament Used: shop.prusa3d.com/en/filament/...
Model: www.thingiverse.com/thing:182136
#3dprinting #makers - Jak na to + styl
wooow, beautiful job sir :D