New PC Build - Asus ROG Strix Z790-F - Intel I9 14900k - 64GB Kingston Fury - MSI Suprim X 3090TI
Vložit
- čas přidán 4. 11. 2023
- Finally decided it was time to upgrade my streaming PC - New spec below:
Case: Corsair Crystal Series 680x RGB
Asus ROG Strix Z790-F Motherboard
Intel I9 14900k
64GB Kingston Fury DDR5 5600
MSI Suprim X 3090TI 24GB
Kraken Z63 AIO Cooler
2 X Samsung Evo 990 M2 2TB
Corsair RM1000x PSU
Corsair LL120 x 3RGB Fans
Corsair Slim line fans x3 (GPU is so big I had to remove the original fans
Monitors:
Alienware AW3420DW 4k 120hz
2 x HP M24FW
Keyboard and mouse:
Corsair K100 Mech RGB
Corsair Dark Core RGB Pro SE
Headset:
Steel Series Arctis Nova Pro Wireless
Camera:
Sony AX5100
Mic:
Hyper X Solo Cast
Lighing:
Elgato Key Light
Govee Y Lights
Govee Hex Lights
Govee Panel Lights
Elgato Stream Deck
Shoutouts:
All my twitch subscribers, follows and lurkers.I could never live this dream without you!
My Amazing mods: Raggy, Mommabuilder and CammoKitty95.
Monstercat for the epic copyright free tunes (membership require to use this music)
Great video, looking forward to my Z790-A and i9 14900K build. Wondering, what is the purpose of installing the black bracket at the beginning behind the cpu on the MB?
Thank you for the kind words. The black bracket is a mounting bracket for the all in one kraken cooler. The cooler screws to that bracket to keep it in place.
How is the Ethernet port on this board? My z590 intel i225 was bad.
Great video. Did you consider the Asus Z790-F ROG wifi II? This seems like the I version.
Ethernet port works a charm. I stream so don't trust WiFi. Have not had any issues at all since building.
A1_PC
Thank you! The updated build in the new case is even better
Hello! Did it work directly for you without updating the bios? THANKS! 😬
Yeah the only issue I had was the bios was flagging up saying no CPU fan installed as I use an AIO cooler so I just plugged one of the fans in the MB as I didn't trust disabling the monitoring for it.
So it was no problem using gen14 cpu with that board?
@@twoeyejackNo problems at all and it's been running smoothly. It does have February's bios so I will update it today incase they tweaked something.
on the motherboard, the black I/O Shell with ROG RGB Logo, is it metal or plastic?
I believe its aluminium with a clear plastic removable cover on top of it.
Did you get the XMP profile on RAM running? I bought the same setup some time ago, and it didn't boot after setting up XMP, needed to change RAM for different from G.Skill.
Sorry for the delay. Yes XMP is running fine with the Kingston DDR5 but I have heard a few people struggling with G Skill. Have you got the latest bios?
@@xNarniex Got this resolved, apparently putting RAM in slots 1/3 does make the XMP unstable. Putting it on 2/4 solved the problem.
@@RemmenthAghhhhh I always use 2 and 4
@@xNarniex, WHAT about using all 4 SLOTS???
@@paulsilva3346 No need really 64gb is more than enough.
Is the asus rog strix z790 F working good because im thinking of going with it but people say there can be problems with setup.
It’s absolutely spot on mate. No issues at all my end. I push it hard with 4k gaming, streaming and video encoding and it has been perfect.
I’m buying the exact same motherboard with i7 14900k, quick question do I need to update Bios to be able to support Gen 14th?
I have the same question
I would highly recommend updating bios. Mine did boot up fine with no issues without a bios update and that was on Februarys bios but I did update bios to latest version afew weeks back just to be safe. Really simple job, just make sure you have a USB stick and it's formatted to Fat 32 then just download the bios from the Asus website and then update in bios its a 10 min job max.
@@xNarniex hell yeah. didn't know about the reformatting ty
What is your PCH temp? Mine runs at 70 idle.
I have a Nvme mounted close to it, not sure if that would be the cause.
Mine runs around 60 idle. When streaming and running the full system flat out I set the cooling high and it doesn't see more than 80 but the systems keeps it 60-70 on average which is very good with the i9s because they run very hot which is why alot undervolt them.
@xNarniex humm, i have a i7 14700k, i think they also run on high temps as the i9s right? I still think the Nvme mounted close to the PCH may also impact temps.
Puting the psu fan on the side is crazzzzy 💀💀💀
Flipping the PSU would be worse, the case has a vented side panel. I am awaiting some fans to come in stock then it's all going in a new case with a new cooler.
@xNarniex my bad g, didnt see that the case was actually made like that. Apologies, looks sexy tho
hi just wanted to ask you if i7 14700 k is good enough with rtx 4080 super at 1440p for gaming and some productivity and will xpg lancer rgb 32 gb 2x16 6400 mhz ddr5 cl32 work with asus rog strix z790 f gaming wifi 2 motherboard also its xmp profile
The ram should be fine but do check on the Asus website for the list of supported memory.
Do you know about the pcie and m.2 configuration? Do they share lanes ?
I believe the main M.2 shares the pci due the gen 5 support the rest do not. I didn't use the gen 5 slot for this reason because I don't run them.
I’m looking to pair an RTX 4090 with the ASUS ROG STRIX Z790-H
Would there be any issue here do you think?
I decided to buy a 4080 last week and replace my 3090ti. And so glad I did so the 4090 will be a beast. GG's
But will the H board pair well with the 4090?
No bottlenecks etc?
@@gavancorrigan8813 I am no expert but I wouldn't see why you would hit any bottle necks with a 4090 especially if you are running a 13/14 gen I9. But with that set up you will be crushing any game on the best settings and it's prob going to a monitor refresh rate being high enough. I run a 4k 120 hz alienware 34inch so I am happy with that for 4k gaming.
Do you flash bios the motherboard ?
I have now just to make everything upto date. But it booted fine without it.
Hello! Is there any way to turn off the lights on the mobo or maybe set them to white thanks! Im building a all black build
Hey, I used corsair I-cue but you need armoury crate installed also for them to sync, this allowed me to change the colour.
@@xNarniex thanks!
I wish that I can build this pc
Hi, I would like to know what is the cooling rate of the cooler at max power ?
With the current cooler I see no more that 80 Degrees Celsius in all my testing but I am awaiting more parts for my new case which will have a new cooler and better flow set up. Stay tuned for another build.
@@xNarniex i see , i will order the i7 14700k in february and looking at tests the max load went up to 100 degrees which is quite a lot ,would dark rock pro 4-5 be able to cool it down or is it worth water cooling anyway ?
The dark rock is a great cooler but also remember that's its not solely the cooler but also bare in mind case flow. The good thing with an aio cooler is it usually draws the direct air from outside the case thus cooling the radiator and water around over the block.
Hi, I have ASUS ROG Strix Z790-E Gaming 1 WIFI Mainboard Sockel Intel LGA1700, (NO II😢)will it be compatible with i7 14700K?
I believe you should be fine with that. Make sure the bios is updated though.
Hold up. I know 14th gen is LGA1700.. but it booted just fine without bios update? I had a Rog strix z690-f and I had to update bios in order to have 13th gen work. I want to exchange this 13th for a new 14th.
Yes that is correct. No issues at all only warning I had was AIO fan not being recognised but all sorted when I plugged the fans direct in the MB
@@xNarniex Actually, I Returned the Z690-F and got the Z790-F Instead. Currently using 13700k as of now. I still have a return period for cpu and was planning to just go full on 14900k. My bios version on this z790 is 0816. Still wont have a problem dropping 14th without bios update? I understand the AIO pump, I have it set to ignore in bios.
From my experience it should boot fine and the bios update is simple to do. Before you upgrade just download the latest bios on a USB stick incase you need it. Mine did have February's bios and it went straight into windows and I didn't even reinstall windows and do a full install, I just reinstalled all the new drivers and it's been solid since especially after fitting a 4080 also
@@xNarniex what bios is it now? Is it 1202?
@@xNarniex update: Upon removing 13700k, I accidentally dropped it on the pins and they got bent. So now, I have z790-E with 14900k . But I haven’t installed yet .
I got i9 900k cpu rtx 3090 I’m thinking of upgrading my CPU, to i9 14900k trying to get better performance on games like battlefield 2042, heavy on CPU some reason I’m getting bottleneck on that game
It all depends on what you are aiming to achieve. Going to a 14900 and still having a 3090 will then flip the bottleneck but again other things like memory and hard drive may also hinder you. If you are playing 1080p you don't need to go crazy. A 13900 is more bang per buck.
is there any problems with samsung ssd?
No not at all, I have never had any issues with the Samsung range.
is there a difference between this motherboard and the rog strix z790-a ?
WIth out going into techincal details the F is an upgrade.
Yeah the main difference is memory and memory clock speeds I believe on the F. 7200 DDR5 is max overclocked and on the A it's 5333 DDR4
Hi, does 14th gen cpu works good with this "old" motherboard? Is it worth getting new motherboards with support for the new gen or does it make no sense and is it better to just update the BIOS on the old ones?
Works totally fine with no issues for me. Stress tested fine and it's been faultless.
new gen has like 2% performance increase for 100 dollars more. Not even worth considering.
@@Jammin591 Very true but I got a great deal on the 14th gen so for me it was a no brainer. If I was suggesting which one to buy I would say 13th gen to save the cash. Same can be said with GPU's also
Should have gone with a black case or white components.
Well it's actually good you say that. Part 2 of the rebuild is waiting on the rest of the items coming in stock. Waiting on the Lian Li TL fans to come in stock then a new video will be made. Also got a 4080 since this video.
you didn't connect CPU cable?
Do you mean the PCI CPU's? If so then yes I did.
@@xNarniex with 1 or 2 cable?
2 they are top of the MB below the cooler. I will be doing rebuild in a new case very soon just awaiting the fans to come in stock.
brother where are you from
I am from the UK.
Why 3090 ti and not 4090?
Was my old card from my old pc but now got a suprim x 4080. I am awaiting some more parts for my new case then I will do part 2 with me doing it all again in the new case.
you should get an rtx 4090 instead of a 3090ti
See my latest rebuild video 😉
Can you give me your pc price
You would be in the range of £3k-£4k for a similar spec PC
@@xNarniex For pubg mobile please help me brother which is better
@@xNarniex i am from saudi my Range is SAR 6000
@@NepaliStarYT 6000 Sar is around £1300 and for that you could get a very good rig in the UK with a 4070 in. I don't know how much things cost where you are but I would say that is a great budget to have.
@@xNarniex CAN YOU GIVE ME Ci5 SPC AROUND 1300 UK
I got same mobo .How do you screw it to the case ive got no stand offs so what gives .Are the stand offs supposed to come with the board or what.Am using stand offs from previous mobo and screws . Screws that came with this mobo are to big to fit standoffs ???????????
The case should of come with standoffs and screws. If you are just replacing the mobo then you should be fine.
@@xNarniex ok thanks for your reply , it's just I have got standoffs already in the case from previous board but the new screws that come with the new board they won't fit into the standoffs or rather they are too thin for them so they don't catch the thread . Ooh well never mind . I shall crack on regardless 👍
Hmmm do you have the old screws? I would use them if they fit. Just don't over tighten.
@@xNarniex yes that's what I will do , I have already fitted it in but I wasn't happy using the screws so I have taken it out again as the screws didn't seem to be a good fit .I will just have to be extra careful thanks 👍