Heads up, removing drywall instead of just rip it out, if you shimmy it pull it back and forth you can pull the screws/ nails out and get full sheets off the wall
@@jeffrichardson5880 not disagreeing at all lol. That and older drywall likes to come off in pieces but new construction drywall comes off nice if you shimmy it lol
@@412jdub unfortunately I never get to remodel newer (post 1985) construction and seems all the drywall people around here want to use ring shank nails… I call them idjets
I came to the comments hoping someone posted the correct way to remove to remove drywall. 👍😅 Ripping out like that is how you would remove really old drywall or plaster
Demoed an old bathroom this week. Removed a portion of a closet from the other room too. Giving the shower more room. Some came out nice in full pieces. There were about 20-30 nails on each stud. Very tough wire mesh in the angles of the ceiling and wall. I don't mind my plumbing, Tiling and Carpentery work. I don't have the energy for demo and carrying all the shit out as a small two man team. But I do it regardless of the exhaustion here and there. As it doesn't occur that much for my work.
The insulation behind his job is fiberglass which he disturbed and sent small glass shards floating through the air. If you have fiberglass batting behind your drywall, WEAR A RESPIRATOR! your lungs cannot get rid of fiberglass particles.
Thanks for the video. I want to remove the drywall and put 2 x 6s in it's place to give it an older look. One thing missing is that I would be wearing a mask at least.
Is it difficult to locate the screws connecting the drywall and the wall studs? Removing the screws first seem to be much cleaner way to remove dry wall.
That’s the less mess, surgical way to do it. Locate all screws with magnet and burrow out its hole. Razor blade to the tape where drywall edges meet. Remove fasteners. Remove entire pieces of dry wall. …. You can also do it like a caveman and get mess everywhere. Then spend time cleaning this shit off everywhere.
That’s the less mess, surgical way to do it. Locate all screws with magnet and burrow out its hole. Razor blade to the tape where drywall edges meet. Remove fasteners. Remove entire pieces of dry wall. …. You can also do it like a caveman and get mess everywhere. Then spend time cleaning this shit off everywhere.
WOW...U ROCK...THANK YOU SOOOOOO MUCH...I want to save money and prep a room for drywall installation, but was unsure how to go about doing it. Your a GOD SENT...BLESS YOU! Luv U.
Stupid way to remove drywall. All that tugging and breaking off small pieces. Oscillating tool to cut the perimeter, drop the entire sheet. Make "hand holes"...LOL. SMDH.
NO! This video was helpful until 2:18. Please do not follow the advice after that point. There's easier ways to remove larger pieces of the sheetrock without hammering holes. There's fiberglass insulation to deal with and zero advice about proper health considerations. Keep searching. There's better DIY videos out there. I'm actually shocked that HD allowed this to be published with their name on it.
Heads up, removing drywall instead of just rip it out, if you shimmy it pull it back and forth you can pull the screws/ nails out and get full sheets off the wall
not always. EG - older homes with heart pine framing can hold nails harder than vice grips.
@@jeffrichardson5880 not disagreeing at all lol. That and older drywall likes to come off in pieces but new construction drywall comes off nice if you shimmy it lol
@@412jdub unfortunately I never get to remodel newer (post 1985) construction and seems all the drywall people around here want to use ring shank nails… I call them idjets
I came to the comments hoping someone posted the correct way to remove to remove drywall. 👍😅
Ripping out like that is how you would remove really old drywall or plaster
Demoed an old bathroom this week. Removed a portion of a closet from the other room too. Giving the shower more room. Some came out nice in full pieces. There were about 20-30 nails on each stud. Very tough wire mesh in the angles of the ceiling and wall.
I don't mind my plumbing, Tiling and Carpentery work. I don't have the energy for demo and carrying all the shit out as a small two man team.
But I do it regardless of the exhaustion here and there. As it doesn't occur that much for my work.
The insulation behind his job is fiberglass which he disturbed and sent small glass shards floating through the air. If you have fiberglass batting behind your drywall, WEAR A RESPIRATOR! your lungs cannot get rid of fiberglass particles.
I plan to. That only makes smart sense !
Really appreciated the tips at the bottom of the screen. FYI, Some of the them were obstructed when viewing in landscape mode.
Thanks for the video 👍
Thank you, this was helpful.
This man is Nevver Actually remove drywall in his life. He is an actor paid by Home Depot.
Make sure you breathe in all that insulation too.
beautiful
Thanks for the video. I want to remove the drywall and put 2 x 6s in it's place to give it an older look. One thing missing is that I would be wearing a mask at least.
Why in heck aren't YOU wearing your respirator?!
Is it difficult to locate the screws connecting the drywall and the wall studs? Removing the screws first seem to be much cleaner way to remove dry wall.
That’s the less mess, surgical way to do it.
Locate all screws with magnet and burrow out its hole.
Razor blade to the tape where drywall edges meet.
Remove fasteners.
Remove entire pieces of dry wall.
….
You can also do it like a caveman and get mess everywhere. Then spend time cleaning this shit off everywhere.
That’s the less mess, surgical way to do it.
Locate all screws with magnet and burrow out its hole.
Razor blade to the tape where drywall edges meet.
Remove fasteners.
Remove entire pieces of dry wall.
….
You can also do it like a caveman and get mess everywhere. Then spend time cleaning this shit off everywhere.
WOW...U ROCK...THANK YOU SOOOOOO MUCH...I want to save money and prep a room for drywall installation, but was unsure how to go about doing it. Your a GOD SENT...BLESS YOU! Luv U.
Did he cut the studs at 3:09??
He seemed nice.
Stupid way to remove drywall. All that tugging and breaking off small pieces. Oscillating tool to cut the perimeter, drop the entire sheet. Make "hand holes"...LOL. SMDH.
I use karate punch to make holes in dry wall!
I can’t comment on you’re CZcams channel but you have very nice pictures!
@@OriginalTyler , thank you. You and me makes two! :-)
You can also do karate kicks
a mask is good too.
Seems too messy
The punch-and-tear method is just stupid.
What a joke. That drywall had no nails or screws. No wonder it came off so easily.
Not good bud
LOL. This guy has no clue.
NO! This video was helpful until 2:18. Please do not follow the advice after that point.
There's easier ways to remove larger pieces of the sheetrock without hammering holes.
There's fiberglass insulation to deal with and zero advice about proper health considerations.
Keep searching. There's better DIY videos out there. I'm actually shocked that HD allowed this to be published with their name on it.
I'd rather remove in smaller sections like he did at first.
He forgot to put on his boxing glove first! What a garbage tutorial
This guy is stoned
This is the dumbest comment here.
Great Job Removing It👍👏🙌🔨🪚!!!