I'm a senior now but had tech no code for twenty years and let them expire. Tried to renew them a few times but apparently I wasn't doing something right. Medical profession says I have stage four bone cancer, prostate cancer and lymph node cancer but I would still like to get my license back. Being bed bound makes for some long days with nobody to chat with...lol
My $40 TYT HT radio is hitting the club repeater, I have no idea how I sound, but I hear everyone and the net controller hears me, so I am slow rolling my upgrade. I am going to purchase a mobile rig next, starting with an antenna. I hope it improves the HT tx while I save up for the radio. I am enjoying the hobby so far and truly appreciate CZcams for the sharing of tribal knowledge. Thank you for creating this video.
Great advice-for all hams-new or old. The grumpy and or know it all types caused me to walk away from the hobby for years. And they were the ones wondering why there were fewer new hams! Keep it up- 73 AA7MO-Mike
Great video. I have had my ham license since 2019 and never really did anything with it. I was one of those who wanted to get into the hobby but family and circumstances came first. I have stuck with it since getting my technician in 2019 and have now studied and operated with a local club. As of october of last year I was able to upgrade to general, and just this past march 17th I tested and upgraded to extra. I fully agree with the fact that you never stop learning. I am working with my local club to learn more about tube radio and amps, and how to fun and repair them. I am also learning from our repeater trustee on how to maintain those and keep them running. The more you raise your hand and want to learn, the more fun you will have in the hobby. There is nothing like your first DX contact in non-ideal connections with a barefoot setup and getting a confirmed QSO. 73s to all Ryan - W8PNP
Love your channel bro! I'm a relatively new Ham, I got my Tech back in April and my General in October...The thing that sets your channel apart from the rest is your not constantly pushing new gear, your videos are educational and that is what is needed..
Just an FYI. DO NOT USE "BREAK BREAK" unless you have an emergency! According to the ARRL, "break break" is only to be used to interrupt a conversion with a priority or emergency message. If you want to get into a conversation it is good practice to simply throw out your call sign. Never say "BREAK BREAK" to get into a conversation.
@@TheSmokinApe I hope I didn't come over disrespectful. I love watching your videos. Just had to correct that. I am running a local traffic net here in Broward and I had an incident where a station tried to get my attention by using break break. I literally stopped the net and went into emergency mode only to find out the station was unaware of the real meaning of break break and only tried to check in.
I'm one of those guys that took the tech and general at the same time. My reason is the repeaters in my area aren't very active. So I'm on HF, but I know I don't know jack about the stuff that most technicians get into. Know what you don't know can be part of that keep learning part.
New expensive gear is nice, but, always a but, the more a rig costs, the more complicated it is! This is why my 12 year old step son always had to program the VCR back in the day! Even a "simple" UV5R is daunting to a new ham, imagine facing the menu system on a modern SDR transceiver if you have no real knowledge of digital modes, even the different "flavors of Morse keys could stump new boy or girl. Remember the KISS Principal (Keep It Simple Stupid), get the basics right and then with a sound knowledge base, move on up to more versatile gear, There is no fun sitting in front of 3 grands worth of kit and not know how to switch the darn thing on! 73 Jim M7BXT
I have noticed that Yaesu radios are a lot easier to program than the baofengs. I'm sure Kenwoods and Icoms do as well, though I have never owned one. If there are any noobs out there that struggle to program baofengs, Don't worry, it gets easier as you go along.
I've had to use radios for over 25 years in a couple of jobs, never as a hobby. I do like to follow this hobby though and I have a shortwave radio to listen to you operators from time to time. All of these things you mentioned concerning transmitting and receiving are very important. It's really the ESSENCE of radio operation. Send or receive the required information and know if you need to reply or wait for a reply(aside from an acknowledgment). Done.(and have pen and paper at hand all the time) Know what you have to say before you key up. And have your ears ready to hear the message the first time.
Really enjoyed your video I am not a new ham as have held an advanced license for 30 years. I have taught over 300 in the last 12 years to get a license thru our local community college. I am going to include these thoughts when I start my next class(right now classes are canceled due to covid. Keep up the video's Joe WX7XX Wood River Amateur radio
I love fish sticks. We call them fish fingers here in the UK. Your advice on not being "set and forget" and also just making a decision and not procrastinating is good and something I should take note of.
This was a great topic to talk about. I got my Technician in 2019 and just upgraded to General last month. My experience with the amateur radio community has been a great and educational experience. The guy who introduced me to amateur radio has been doing it since 1963, and he’s one of the most humble and enthusiastic person I know. I’ve seen the Elmers in the area really take a lot of people under their wing and teach new operators when ever they can. I thought you were dead on about purchasing equipment, and getting to use the radio prior to making the purchase will save you money and headaches later on. Thanks again!
Thank you so much for this video you have no idea how much it has helped me, I have tons of questions but nine times out of ten I don’t ask because after thinking about it I’m afraid it’s just another dumb question.
Hey Bob, it's common for folks to be nervous when asking questions... mostly because of the jerk hams. Feel free to ask away here, if you have a question it's likely someone else is wondering about the same thing. 👍
I've an EFHW in a tree outside my apartment window. I'm also DXCC #68,350. I also have 1500 watts of power when I need or want to use it. I can buy and use expensive equipment, what I cannot do is erect a large antenna structure and slap a big set of stacked beams on it. Your advice is, put simply, ill informed at best.
@JonathonC-iq9ih 1500W on an EFHW hanging on a tree outside an apartment window? Ok. You are putting 1000s of volts on that wire, a lot of EMF. If I was not a ham and I lived near that thing, I would be complaining. Make sure you are complying with the ARRL RF exposure recommendations for everyone.
New radio enthusiast here. I have a gmrs license and a baofeng 5rm. I’m still teaching myself how to adjust the settings and program it correctly, with the information provided by repeater stations online info. I’m still finding new questions a month later, because some terminology is used and some is not, based on the spreadsheet on chirp. So when I think I’ve got an idea, I find more Information that I didn’t know existed. It’s hurting my brain, but I will get my licenses and all necessary equipment for hf/vhf/uhf communications. I’m not sure what is driving me to join this community, but i was really excited in the first couple conversations that cam in on a local repeater this afternoon. The topics were antennas, masts, electronics components, traffic, radio contacts we’ve made while on vacation, and people met at ham fest…nerds.
I'm a brand new UK foundation license holder. I did loads of reading before buying anything and settled on a Retevis RT3S & MMDVM Hotspot which I built on an old Pi 3B+ to get me started. All in, the cost was less than £100 and I have Worldwide Comms. I don't have the possibility for HF antennas so DMR has been a Godsend. I just love the hobby... the respect that is shown to others is what makes me smile most. Such a good bunch of helpful and knowledgeable people in Ham Radio World. Great video Ape, some very useful info in there!
Regardless of my call sign I've been into radio a long time and all I can say is welcome to the big boys radio 👍i.ll hopefully will be sitting for my next licence this year all being well covid and all that.
It's a great hobby but the internet is the internet nothing more, if it goes down so does your signal. so many hams get so excited saying I spoke to someone in the USA, or Australia today, come on its the internet,
@@brian.7966 It's also more than just internet. Getting a £65 handheld to connect to Yaesu, Dstar, DMR, TGIF Prime, DMR+, XLX Reflectors, sending SMS messages over APRS etc.. All neatly programmed into a tidy codeplug.. That is quite satisfying, internet based or not and it opens the hobby up to me in ways that analog can not. Again, YMMV.
I had a few criteria that had to be met before I bought my first radio, space, cost and functionality, which is why I chose the Yaesu FT991A, it's basically a "shack in a box", reasonably priced and does it all.
Great insight. just what I was searching for. I'm just beginning my journey inti armature radio. Retired and looking for something new. Have been on CB for many years and want to extend my options and learning capabilities Thanks
I’ve been watching so many videos “geared” towards newbies and yours by far have been a pleasure to watch and learn. Strait to the point and open minded. No “it’s my way or it’s wrong!” No off topic fluff! Watched one we’re he went in for almost 10min about his weight gain 🤦🏻♂️ needless to say he lost me quick. Keep up the informative and well produced videos. And BTW, of all the vids I’ve endured, you’re the only one that I’ve subscribed to. 👍🏻👍🏻
I agree with your points, here. And the phrases "Be nice & always stay open to learning more" are two that I really agree with. I have been a Tech for 20 years and still have fun with it, but until now was never really interested in long range HF. (To much money, equipment and antenna, etc...) So now I may try for my General license. And being nice is always good, because the person your chatting with, may be a jerk. But its the new and young Hams, that are monitoring the same conversations, we must consider. We don't want classy Ham Radio to become trash talking CB! P.S. And I like a hard copy reference book. But can't lay my hands on my old Tech guide. It might have gotten lost in my prior life?
One of your best videos, Ape - excellent summary for new and seasoned veterans, alike. Thanks for taking the time to put these tips together - much appreciated. 👏🏻👏🏻👏🏻👏🏻
I haven't started into ham yet, but great advice! I think you could apply the same advise to many hobbies. Especially, for those that know enough to help others. Be pleasant, helpful, and promote what you do. What good is a hobby (especially one revolved around communication) if you don't have others to enjoy it with. Thank you for taking the time to create this great content.
Man, I wish I had watched this video earlier this year... to be technical I currently own seven radios.... one of which I actually currently use! You hit a lot of important angles that only experience teaches you, really good talk here! Much of this advice applies to a lot of other things in life! You should be a hundred years older, sitting on a tall mountain, smoking a hookah and waiting for noobs like me to climb the mountain!
Best advice I can give. Is join a club. I've been a HAM since 2016, and I've been a member of a Ham Radio club since I became a HAM. I've learned a lot, and I'm still learning. If you want a hobby where every thing is working right, right out of the box, Ham isn't it.
Great job! All hams new and old will appreciate it. Adding another point and I cover this on my QRZ page, if you get bored with ham radio try something new in the hobby. I've know guys that all they ever did was contest and that was the only time they turned on their radio. Finally when they got 5 band DXCC and have contacted every DX entity, in every mode, on Tuesday afternoon or whatever they end up quitting the hobby out of boardum. So sad that this all they see ham radio is good for. It's a hobby. Relax and enjoy all of it ! Lastly I love your final point. DON'T BE A GRUMP! I run across way too many bitchy, crabby hams that end up scaring new young hams away. Smile! Everyday above ground is a good day because one day you'll be looking up at the roots of the grass! 73, K9AT
True, good advice. There is always something new to learn, even the old stuff. It kind of keeps that kid alive in you. I'm about 70 and everything still excites me as though I was still 16. Fish sticks and crackers ... funny you should say that, story of me life mate.
I have had my tech ticket for over a year now. I use DMR exclusively. I tried 10m once, I used the wrong term on my first contact and that dude tore me apart and then got other hams involved. I have never worked 10m since. I found DMR and I have had no issues.
Thanks for the video for us newbies! I have just started studying for the technician’s license. Found a nearby club. Thankfully, they welcome all and do not require membership to attend their meetings. Looking forward to going to one of their meetings and just feeling it out to see if a) ham radio is an interest I definitely want to invest the time and money into and b) if so, if it’s a club I’d like to become a member of. So far, I love that it’s an ongoing learning process and a fascinating hobby.
Great advise I am a new ham along with my son and agree. I not sure if I made a mistake but not sure it was the best choice to start with a HT vs. a mobile rig. I ended up buying a FT3DR for me and a UV5R for my son. Both are great radios I do think I will use all the functions of the FT3DR eventually but I may have been better off buying another UV5R and a mobile rig so I had a little more power along with a better antenna.
Thanks Have been interested in a very long time just started looking up vids and studying but really enjoyed your calm collected Top 5 mistakes...... Thank you.
Ape... This is a great video... I went to General on day one and sometimes I think it was a mistake. After a year I still am clueless on HF except FT8.
Great Video, I'm a little late for the first bullet point i may have more equipment than i need right now as a tech but I am ready for the the future when i get my general and extra tickets.... I'm still learning a lot, currently studying for general, taking it one step at a time... heck a lot of nights I have to tell my self to go to bed and stop watching ham videos, listening/talking on repeaters or reading because I will never go to bed...lol Between The Smokinape, HRCC and Ham radio 2.0 and a couple others I have plenty to watch and learn from.... heck one day maybe I will be youtubing about ham radio just like you ! :D
I started with a Baofeng UV 5R and used gear that my brother in law gave me. I've since then bought like new gear. I live in the city and enjoying the hobby quite a bit. No need to break the bank. 73 K2BNY
I’ve found it helpful when someone is telling me about something they really like, I ask them to tell me what they don’t like about their “product x” they speak so highly of. No product is perfect.
Thanks! I'm taking my Tech exam in a couple weeks. Your style and info calmed me down a bit. I'm taking a deep breath, crossing my fingers and aiming-to-pass.
im totally number 3. i got my licence 6 years ago, have not been on the air once yet. i fell i dont know enough about whats available and im afraid im going to get the wrong thing.
I am starting cheap and even though I do not have high-end stuff, I am thoroughly enjoying the journey. I plan to stay here for a while until I pass my general and then, depending on how I like it, I will make a decision then. Good advice...
Awesome list of topics. This is my first of your videos and although I don’t have a ham license I can relate. I did communications in the Army and for a long time was a member of a large (over 2K members) CB Club and we had guys who made most, if not all the same mistakes. Yes, I know many Hams frown on CB’ers but many of us learned and stuck by the rules, especially because back then we were also issued licenses by the FCC. To me it is sad that what I considered the one real thing that separated CB’s from Hams was that Hams HAD TO learn Morse Code. Once that went away I lost interest in becoming one of the “elites” in radio communications. I now found a group out of NY that will help me learn so I’m studying for my Technician level now. I can say this, the day you think that there’s nothing else to learn as a Ham, is the day you should realize you don’t know anything about being a real Ham. I recently met a know-it-all Gen licensee that couldn’t tell me how to determine the length of a Dipole antenna for XXX.XXXX Frequency. I learned that as a CB’er 40 years ago and still remember.
Great video - subscribed. I'm a new ham and I think this is all great advice. If you ever meet up with a "grumpy" ham, just remember that a grumpy ham was once a beginner just like everyone else, so maybe ask about how they got started. You might see that "new ham" smile and it will remind them how important new hams are to the hobby - just like they were. 73 KE8SKH
Thanks for the video! I earned my technician 2-22-21 then my general 3-22-21. I love my newly found hobby. I agree with the financial statement. I was quite embarrassed of my $25 baofeng uv-5r HT at first. I've added a bigger battery, and a better antenna. From all the signal reports I've asked for everyone has said it sounded great. I also have a Btech uv50x2 now it's a great radio as well. I hope I'm able to get a HF radio soon, just can't get past the price... anyways, thanks for the video!
@SmokingApe I have been looking into ham radio for a while, off and on, and am very hesitant about going for a ham license. The main reason why is that I don't really don't know what people really do on ham radio. So naturally I had looked up some videos on it and the point you bring up about "No when to Rag Chew". Of course I didn't fully understand that term, but looking it up, it roughly means "small talk". Now, I was under the impression that one of the points in making a contact is to have a nice conversation with the person you reached. However, based on what you said about "get in, identify yourself, perhaps mention gear or the weather and then get back back out", had me scratching my head. I looked at other videos and it seems that most people do the latter. While that does seem to be fine for contests or for those just wanting to make DX contacts, I wonder about "rag chewing". I don't see many people doing it. To me, getting in, identifying yourself, talking about gear or weather, all the time, will get old very quickly. If that is what Ham radio is mainly about, then it is doubtful that I would go for a license. I had thought about your "listening" topic and thought about getting a ham receiver only so I could listen to what is going on first, but not sure if I would be wasting money there. As it is, even for a receiver, it costs money and so does a proper antenna. I had thought about going into CB radio first, given that the radios and antenna are fairly cheap and I can transmit as well as receive without having to bother with a license. The downside to that idea is that CB is very limited in range and I don't know what the local CB scene is like here. While there was a huge boom in CB radio usage in the 70's, today, there are many other forms of communication people use instead and CB seems to have gone the way of the Dodo bird....or at least, that is what I as told. However, there are some that say otherwise (here on YT). At least, I learned that that "rag chewing" isn't frowned upon with CB radio. Some even say that CB transmissions can "skip" on the atmosphere, like Ham Radio can, thereby making distance listening possible. So it does make me wonder if I should go the route of CB instead. However, even though I could get a sub $100 system together, I would be quite disappointed to get the gear just to find out that no one is using CB radios in my area. So it is a catch 22. But if all Ham radio is just about making contacts, and being a way to communicate in the case of emergencies, then I don't think that is enough to warrant getting a license and going down the rather expensive rabbit hole of amateur radio.
Thanks for this video. A few weeks ago (while tinkering with an old VHF handheld) I decided to do some research on amateur radio and even looked at avenues for getting my license. Since then I have watched dozens of CZcams videos on the topic, researching every angle I could. I actually ended up with a Baofeng UV-82HP that someone was about to throw away and I began scanning the local repeaters. In well over a week I haven't heard a single conversation (I do hear the time stamps so I know the radio is receiving). I'm in north central Indiana and have been assured that hams are still quite active in the area (despite the lack of chatter). Now I'm wondering whether it's even worth it to join the hobby. Is amateur radio just not what it used to be?
I just subscribed. I found myself nodding in agreement as I listened. Much of the information applies to numerous different hobbies. I forget who it was who said it to me, but long ago I learned that respectful criticism, respectfully received, can change lives.
#1 get a licence. The best way to do that IMO is to join a local club where you will get plenty of good advice & support. Remember as you progress up the licence levels your output power increases so take your time acquiring equipment. Less is sometimes more when you are just learning & starting out. Nowdays it is easy to get started locally with VHF/HF before moving into HF.
This is the video I always wanted to see at any stage of owning a radio, it seems I find out much more only after a purchase has already been made & I can never know too much.
Totally agree with spending money on gear that is useful and within budget. I have an FT3D with a BTech amplifier and a 61-inch Comet antenna on a mag mount (with a cookie sheet as a ground plane). Not super expensive and I can hit the repeaters, analog and Fusion, enough to participate in nets. It is good enough for me until I move out of my apartment into a house, where I can move into HF.
Sorry for my ignorance but, what do you mean by moving into HF once moving out of your apartment? To me HF=High Frequencies, or is HF also used for gear type?
Remembering to actually **enjoy** your hobby is a much bigger deal I think than most people realize. I've gotten deeply involved in volunteer leadership in other hobbies in the past and forgot to actually enjoy myself, and wound up burning out **hard**. I'm going to be trying to **not** do that as I get into ham!
Was a member of a club and the only two in the country. Was not a good experience. Just three of us did our own thing. On the local repeater and the only thing I hear is the IDEA. I just love my hobby. Making antennas. So when the sun spots get better, wow it will be fun. 73 de KQ4CD
I'll admit I nearly went overboard on buying new gear, but I just stuck with a Xiegu G106 to keep in budget and be in QRP. Then a power supply. I feel happy sticking within $500. I'm not going into antennas until I have space and advice. I got tacticals and bnc's for HT but I'll get coaxial and 16g wire later.
I sold a few projects that were stalled out to get my radio gear. Sold a car, bought a radio. Sold a set of rims, bought another radio. Sold an old plow truck, yep, bought an amp. WOOT!!! I did buy all new gear, but not the biggest and best, I bought Yaesu, kenwood, Icom, astron, acom, ect. Just not the flagship of any of them. I have been a ham for 6 years, and I have every radio I bought, and I use all of them regularly. I don't feel the need to update all the time. My ftdx1200 runs fine, and will not replace it ever until it pukes. I just remember most people will have better gear, and I will not waste money to try to " keep up ".
the 7300 is a good rig even if you are not a ham , most of a hams time spent on the radio is listening , so if your a tech and like to listen to hf the 7300 is a great way to go and if you up grade you have a great rig to utilize !!!
Hi from England. Wow!! an excellent video. Passed my foundation and intermediate many years ago and decided to get back into the hobby recently. My current radio.. a 'Yaesu 857d' , with 3 children and loads of financial responsibilities, I still feel guilty with the cost of the purchase even though it was second hand. However as my mentor says, or 'Elmer in the US' , when that radio can't do what you want it to do, that's the time to consider upgrading. Yes I know loads of Ham's with ic-9700, ic- 9300, 9600's, 991a's or ft-dx10's etc etc. however im now operating on QO-100 with that now supposedly 'outdated' 857d and still learning day by day, upgrade time seems a very long way away!!! Enjoy your 'hobby' and steer away from the twinkling lights, millions of buttons, menus and the mesmerising '3D Waterfall' until your really ready ' 😀😀 or put another way 'Dont run before you can walk' !!!.....
I'm just getting back into ham....after a long hiatus. Their are so many cheap kits out their....I am like an expectant parent awaiting the arrival of my ubitx kit I will be on the air for less than 300 bucks by the time I get the wire for the antenna ...SWR meter....basic ATU. When I bought my Kenwood TS430S back in the early 80's cost me $1000 that was a lot of pocket money back then!!! We now have Arduino.....great kits....digital modes etc. SOOOOOO much possibility!
On the topic of "learn the phonetic alphabet", while I agree it's handy and good to know, don't get hung up on it if you have to think too hard about it and/or use the wrong word. Outside of emergency situations, there are no real downsides to taking your time, making mistakes, or correcting yourself on the air. Most hams (seriously, the vast majority) aren't going to care if you accidentally say "queen" instead of "Quebec", and the worst you're likely to get from a ham who does care is a "next time use Quebec instead of queen". This is something I had to learn to get over my mic fright. I still struggle with it a year into the hobby.
@@TheSmokinApe yeah man, to be clear I wasn't trying to call you out or anything. I knew what you meant. I just wanted to make it clear to folks that the costs of getting it wrong aren't all that bad. I bring it up whenever I see this stuff talked about, defintely not trying to pick on you :D
Ham is or can be a tough hobby. Having spent my whole life working ems and real emergencies Ham can save lives. Especially along the coasts If your a bad ham operator your may well cost someone their life by discouraging them from the Hobie.
I'm a little worried. I contacted the club close to where I'm moving and nobody has replied. It seems like it's a pretty close knit group of about 20 people. I have been in contact with another club about 50 miles away and they've been great. If I'm ignored, I do the same in return. I guess some people in clubs think you're crashing the party.
Don't think C H E A P is good. The market is flooded with cheap, counterfeit, knock off, compromised etc gear. Do the research and find a couple of people to teach you to spot that stuff. Also, acquiring commercially produced gear e.g. antennas is not bad. You don't have to build a antenna to be a ham. One last thing when buying used gear, check the price with Ham Radio Outlet, DX Engineering etc. Many times you can buy a new radio with warranty for the cost of what people are asking for used gear. Great video!
Good video, made me laugh a time or two. I'm guilty when it comes to wanting to buy the highest end gear and I've only been licensed since Jan 😂 I'm bad about researching a radio and researching my research 🤔 You've got a great channel and great videos, keep it up. Mike/W5SKK The Anvil Monkey (I'm a primate too)
Great vid. Any radio you get will have more features on it than you will ever use. I don't use the first radios I purchased. I have progressed in the hobby so I bought different equipment to suit my changing needs. I still own the old ones because I know how to use them and I can Elmer someone with them If I need to.
I'm a new ham looking for guidance. Your sober, common-sense advice is a great sign that I've come to the right place.
Welcome aboard! Thanks for the comment Matt!
I to am a ham noob and bought the RTL-SDR to get my feet wet. So far I am enjoying the hobby and refer to your videos quite extensively.
For real.
Ants are famous in the world of biology for using pheromones to warn other ants about danger or guide them to food
I’ve been involved in several serious hobbies of the years and this is great advice for any hobby
Yeah, it's pretty straightforward common sense stuff but it's easy to get caught up in the excitement. Thanks for the comment Randy 👍
I'm a senior now but had tech no code for twenty years and let them expire. Tried to renew them a few times but apparently I wasn't doing something right. Medical profession says I have stage four bone cancer, prostate cancer and lymph node cancer but I would still like to get my license back. Being bed bound makes for some long days with nobody to chat with...lol
@@boskans7800 I am so sorry to hear that. I’m sure it would be nice to visit with people like you said. Prays for you and your family.
My $40 TYT HT radio is hitting the club repeater, I have no idea how I sound, but I hear everyone and the net controller hears me, so I am slow rolling my upgrade. I am going to purchase a mobile rig next, starting with an antenna. I hope it improves the HT tx while I save up for the radio. I am enjoying the hobby so far and truly appreciate CZcams for the sharing of tribal knowledge. Thank you for creating this video.
Thank for checking out the video Christin
Great advice-for all hams-new or old. The grumpy and or know it all types caused me to walk away from the hobby for years. And they were the ones wondering why there were fewer new hams! Keep it up- 73 AA7MO-Mike
Thanks for the feedback Mike, glad you liked the video 👍
Great video. I have had my ham license since 2019 and never really did anything with it. I was one of those who wanted to get into the hobby but family and circumstances came first. I have stuck with it since getting my technician in 2019 and have now studied and operated with a local club. As of october of last year I was able to upgrade to general, and just this past march 17th I tested and upgraded to extra. I fully agree with the fact that you never stop learning. I am working with my local club to learn more about tube radio and amps, and how to fun and repair them. I am also learning from our repeater trustee on how to maintain those and keep them running. The more you raise your hand and want to learn, the more fun you will have in the hobby. There is nothing like your first DX contact in non-ideal connections with a barefoot setup and getting a confirmed QSO.
73s to all
Ryan - W8PNP
That's awesome that you stuck with it, sounds like you are having a good time. Thanks for the comment Ryan!
Love your channel bro! I'm a relatively new Ham, I got my Tech back in April and my General in October...The thing that sets your channel apart from the rest is your not constantly pushing new gear, your videos are educational and that is what is needed..
Thanks man, that's the exact vibe I am going for!
Just an FYI. DO NOT USE "BREAK BREAK" unless you have an emergency! According to the ARRL, "break break" is only to be used to interrupt a conversion with a priority or emergency message. If you want to get into a conversation it is good practice to simply throw out your call sign. Never say "BREAK BREAK" to get into a conversation.
Good point
@@TheSmokinApe I hope I didn't come over disrespectful. I love watching your videos. Just had to correct that. I am running a local traffic net here in Broward and I had an incident where a station tried to get my attention by using break break. I literally stopped the net and went into emergency mode only to find out the station was unaware of the real meaning of break break and only tried to check in.
@@CharlieArtner not at all, you make a good point that should be noted 👍
@@CharlieArtner The term "contact" or "your call sign" between transmissions is what I've seen most often...
Isnt the proper term CQ CQ instead or wait your turn before sounding off?
I'm one of those guys that took the tech and general at the same time. My reason is the repeaters in my area aren't very active. So I'm on HF, but I know I don't know jack about the stuff that most technicians get into. Know what you don't know can be part of that keep learning part.
For sure, welcome to the hobby and thanks for the comment Gregory 👍
New expensive gear is nice, but, always a but, the more a rig costs, the more complicated it is! This is why my 12 year old step son always had to program the VCR back in the day! Even a "simple" UV5R is daunting to a new ham, imagine facing the menu system on a modern SDR transceiver if you have no real knowledge of digital modes, even the different "flavors of Morse keys could stump new boy or girl. Remember the KISS Principal (Keep It Simple Stupid), get the basics right and then with a sound knowledge base, move on up to more versatile gear, There is no fun sitting in front of 3 grands worth of kit and not know how to switch the darn thing on! 73 Jim M7BXT
I have noticed that Yaesu radios are a lot easier to program than the baofengs. I'm sure Kenwoods and Icoms do as well, though I have never owned one. If there are any noobs out there that struggle to program baofengs, Don't worry, it gets easier as you go along.
Haha, Baofeng's can make you sweat! Yeasus are much easier... Thanks for the comment.
I've had to use radios for over 25 years in a couple of jobs, never as a hobby. I do like to follow this hobby though and I have a shortwave radio to listen to you operators from time to time.
All of these things you mentioned concerning transmitting and receiving are very important. It's really the ESSENCE of radio operation.
Send or receive the required information and know if you need to reply or wait for a reply(aside from an acknowledgment). Done.(and have pen and paper at hand all the time)
Know what you have to say before you key up. And have your ears ready to hear the message the first time.
Thanks for the comment Darkstar 👍
Really enjoyed your video I am not a new ham as have held an advanced license for 30 years. I have taught over 300 in the last 12 years to get a license thru our local community college. I am going to include these thoughts when I start my next class(right now classes are canceled due to covid. Keep up the video's Joe WX7XX Wood River Amateur radio
Awesome man, thanks for watching Joe 👍
I love fish sticks. We call them fish fingers here in the UK. Your advice on not being "set and forget" and also just making a decision and not procrastinating is good and something I should take note of.
Yeah, I’ve been to the UK and the Fried Fish is pretty good. Here in the states fish sticks ain’t so good. Thanks for watching John 👍
This was a great topic to talk about. I got my Technician in 2019 and just upgraded to General last month. My experience with the amateur radio community has been a great and educational experience. The guy who introduced me to amateur radio has been doing it since 1963, and he’s one of the most humble and enthusiastic person I know. I’ve seen the Elmers in the area really take a lot of people under their wing and teach new operators when ever they can. I thought you were dead on about purchasing equipment, and getting to use the radio prior to making the purchase will save you money and headaches later on. Thanks again!
Thanks Walter, sounds like you were able to hook up with a great group of hams!
Thank you so much for this video you have no idea how much it has helped me, I have tons of questions but nine times out of ten I don’t ask because after thinking about it I’m afraid it’s just another dumb question.
Hey Bob, it's common for folks to be nervous when asking questions... mostly because of the jerk hams. Feel free to ask away here, if you have a question it's likely someone else is wondering about the same thing. 👍
Don't chase DX with ever increasing power - learn to use the antenna force and all will be well young Skywalker :-).
Great point, thanks for checking in John!
I've an EFHW in a tree outside my apartment window. I'm also DXCC #68,350. I also have 1500 watts of power when I need or want to use it. I can buy and use expensive equipment, what I cannot do is erect a large antenna structure and slap a big set of stacked beams on it. Your advice is, put simply, ill informed at best.
@JonathonC-iq9ih 1500W on an EFHW hanging on a tree outside an apartment window? Ok. You are putting 1000s of volts on that wire, a lot of EMF. If I was not a ham and I lived near that thing, I would be complaining. Make sure you are complying with the ARRL RF exposure recommendations for everyone.
New radio enthusiast here. I have a gmrs license and a baofeng 5rm. I’m still teaching myself how to adjust the settings and program it correctly, with the information provided by repeater stations online info. I’m still finding new questions a month later, because some terminology is used and some is not, based on the spreadsheet on chirp. So when I think I’ve got an idea, I find more
Information that I didn’t know existed. It’s hurting my brain, but I will get my licenses and all necessary equipment for hf/vhf/uhf communications.
I’m not sure what is driving me to join this community, but i was really excited in the first couple conversations that cam in on a local repeater this afternoon.
The topics were antennas, masts, electronics components, traffic, radio contacts we’ve made while on vacation, and people met at ham fest…nerds.
Well welcome to the hobby. Things that seem complex at first become simple with time, we all faced the same challenges when we started out...
I'm a brand new UK foundation license holder. I did loads of reading before buying anything and settled on a Retevis RT3S & MMDVM Hotspot which I built on an old Pi 3B+ to get me started. All in, the cost was less than £100 and I have Worldwide Comms. I don't have the possibility for HF antennas so DMR has been a Godsend. I just love the hobby... the respect that is shown to others is what makes me smile most. Such a good bunch of helpful and knowledgeable people in Ham Radio World. Great video Ape, some very useful info in there!
Regardless of my call sign I've been into radio a long time and all I can say is welcome to the big boys radio 👍i.ll hopefully will be sitting for my next licence this year all being well covid and all that.
It's a great hobby but the internet is the internet nothing more, if it goes down so does your signal. so many hams get so excited saying I spoke to someone in the USA, or Australia today, come on its the internet,
@@brian.7966 I have pretty reliable internet so for me it's great. YMMV
@@brian.7966 It's also more than just internet. Getting a £65 handheld to connect to Yaesu, Dstar, DMR, TGIF Prime, DMR+, XLX Reflectors, sending SMS messages over APRS etc.. All neatly programmed into a tidy codeplug.. That is quite satisfying, internet based or not and it opens the hobby up to me in ways that analog can not. Again, YMMV.
I had a few criteria that had to be met before I bought my first radio, space, cost and functionality, which is why I chose the Yaesu FT991A, it's basically a "shack in a box", reasonably priced and does it all.
That is a pretty sweet radio, thanks for the comment Rob!
Great insight. just what I was searching for. I'm just beginning my journey inti armature radio. Retired and looking for something new. Have been on CB for many years and want to extend my options and learning capabilities Thanks
Glad to hear the video was helpful, thanks for the feedback Jennifer 👍
CB more fun
I’ve been watching so many videos “geared” towards newbies and yours by far have been a pleasure to watch and learn. Strait to the point and open minded. No “it’s my way or it’s wrong!” No off topic fluff! Watched one we’re he went in for almost 10min about his weight gain 🤦🏻♂️ needless to say he lost me quick. Keep up the informative and well produced videos. And BTW, of all the vids I’ve endured, you’re the only one that I’ve subscribed to. 👍🏻👍🏻
Thanks racrx7, glad you like them 👍
I agree with your points, here. And the phrases "Be nice & always stay open to learning more" are two that I really agree with. I have been a Tech for 20 years and still have fun with it, but until now was never really interested in long range HF. (To much money, equipment and antenna, etc...) So now I may try for my General license. And being nice is always good, because the person your chatting with, may be a jerk. But its the new and young Hams, that are monitoring the same conversations, we must consider. We don't want classy Ham Radio to become trash talking CB!
P.S. And I like a hard copy reference book. But can't lay my hands on my old Tech guide. It might have gotten lost in my prior life?
Thanks for the comment Chris! I just don't get why some folks choose to be grumpy.
One of your best videos, Ape - excellent summary for new and seasoned veterans, alike. Thanks for taking the time to put these tips together - much appreciated. 👏🏻👏🏻👏🏻👏🏻
Thanks Scott, glad you liked it 👍
I haven't started into ham yet, but great advice! I think you could apply the same advise to many hobbies. Especially, for those that know enough to help others. Be pleasant, helpful, and promote what you do. What good is a hobby (especially one revolved around communication) if you don't have others to enjoy it with. Thank you for taking the time to create this great content.
Yeah, it's mostly just common sense stuff but it's easy to get caught up in the excitement. Thanks for watching Andrew 👍
Man, I wish I had watched this video earlier this year... to be technical I currently own seven radios.... one of which I actually currently use! You hit a lot of important angles that only experience teaches you, really good talk here! Much of this advice applies to a lot of other things in life! You should be a hundred years older, sitting on a tall mountain, smoking a hookah and waiting for noobs like me to climb the mountain!
LOL! Glad you liked the video DeWayne, thanks for checking it out!
Best advice I can give. Is join a club. I've been a HAM since 2016, and I've been a member of a Ham Radio club since I became a HAM. I've learned a lot, and I'm still learning. If you want a hobby where every thing is working right, right out of the box, Ham isn't it.
Thats awesome James, thanks for sharing 👍
Great job! All hams new and old will appreciate it. Adding another point and I cover this on my QRZ page, if you get bored with ham radio try something new in the hobby. I've know guys that all they ever did was contest and that was the only time they turned on their radio. Finally when they got 5 band DXCC and have contacted every DX entity, in every mode, on Tuesday afternoon or whatever they end up quitting the hobby out of boardum. So sad that this all they see ham radio is good for. It's a hobby. Relax and enjoy all of it !
Lastly I love your final point. DON'T BE A GRUMP! I run across way too many bitchy, crabby hams that end up scaring new young hams away. Smile! Everyday above ground is a good day because one day you'll be looking up at the roots of the grass!
73,
K9AT
Great post! Thanks for watching David!
True, good advice. There is always something new to learn, even the old stuff. It kind of keeps that kid alive in you. I'm about 70 and everything still excites me as though I was still 16. Fish sticks and crackers ... funny you should say that, story of me life mate.
Exactly, thanks for watching Charles.
I really enjoy your presentation style. Keep up the good work!
Thanks Arthur, glad you like it 👍
I have had my tech ticket for over a year now. I use DMR exclusively. I tried 10m once, I used the wrong term on my first contact and that dude tore me apart and then got other hams involved. I have never worked 10m since. I found DMR and I have had no issues.
DMR is a lot of fun. Don't let the grumps chase you off...
Thanks for the video for us newbies! I have just started studying for the technician’s license. Found a nearby club. Thankfully, they welcome all and do not require membership to attend their meetings. Looking forward to going to one of their meetings and just feeling it out to see if a) ham radio is an interest I definitely want to invest the time and money into and b) if so, if it’s a club I’d like to become a member of. So far, I love that it’s an ongoing learning process and a fascinating hobby.
That's great Mary, welcome to the hobby!
Great advise I am a new ham along with my son and agree. I not sure if I made a mistake but not sure it was the best choice to start with a HT vs. a mobile rig. I ended up buying a FT3DR for me and a UV5R for my son. Both are great radios I do think I will use all the functions of the FT3DR eventually but I may have been better off buying another UV5R and a mobile rig so I had a little more power along with a better antenna.
Most folks start with an HT to learn the ropes. That 3dr is a nice little radio, congrats on the purchase and welcome to the hobby!
Thank you for speaking what I have been thinking. Truth.
Thanks Richard!
Thanks Have been interested in a very long time just started looking up vids and studying but really enjoyed your calm collected Top 5 mistakes...... Thank you.
Thanks Philip, glad you liked it 👍
I'm a new Ham (KK7MLS), and I like your approach. You are a genuinely good man. Thank you!
Thanks MLS, glad to hear you like the channel 👍
Great tips. Number 5 is my favorite of the bunch. Gotta keep learning!
Thanks Jason, appreciate the comment 👍
I really like the just be nice line!
Me too, thanks for watching Terry 👍
Ape... This is a great video... I went to General on day one and sometimes I think it was a mistake. After a year I still am clueless on HF except FT8.
Thanks man, glad you liked it Michael 👍
Really like your honest down to earth style! Great for me a newbie. 73’s
Thanks Alan, glad you liked it 👍
So glad I ran across this video. Great advice for a new Ham like myself. Thanks
Glad it was helpful Paul, thanks for watching 👍
Great Video, I'm a little late for the first bullet point i may have more equipment than i need right now as a tech but I am ready for the the future when i get my general and extra tickets.... I'm still learning a lot, currently studying for general, taking it one step at a time... heck a lot of nights I have to tell my self to go to bed and stop watching ham videos, listening/talking on repeaters or reading because I will never go to bed...lol Between The Smokinape, HRCC and Ham radio 2.0 and a couple others I have plenty to watch and learn from.... heck one day maybe I will be youtubing about ham radio just like you ! :D
We need more ham content to get more hams! Thanks for the comment and watching Mike 👍
Well presented, articulate, and informative. Thank you.
Thanks, glad you liked it!
I am a new Technician Class ham, very good video! Good advice, and I will take it to heart.
I'm glad you liked it. Thanks for watching Ken 👍
Great video for a soon-to-be new ham. Love the typo too the explanation works.
Haha, thanks Alvin and welcome to the club 👍
I started with a Baofeng UV 5R and used gear that my brother in law gave me. I've since then bought like new gear. I live in the city and enjoying the hobby quite a bit. No need to break the bank. 73 K2BNY
I started with a 5R as well, thanks for the comment Ken.
I’m studying for my HAM license and already bought my first Yaesu radio. Can’t wait to start using it. 👍🏽
That's awesome Chris, good luck with the test!
@@TheSmokinApe I just passed the test today 33 out of 35. Can’t wait to get my license sometime next week so I can start using my radio.
@@ExploringLifeWithChris awesome Chris, congrats 🎉
I’ve found it helpful when someone is telling me about something they really like, I ask them to tell me what they don’t like about their “product x” they speak so highly of. No product is perfect.
Agreed. There’s good products and some that are better and some that are worse. Thanks for watching Jon 👍
Important points that can be applied to many hobbies/interests/activities.
That’s true Hatter, thanks for the comment 👍
Excellent video. I appreciate the clear information presented in a calm thoughtfull way. No noise and hype.
Thanks Albert, glad you liked it 👍
Thanks! I'm taking my Tech exam in a couple weeks. Your style and info calmed me down a bit. I'm taking a deep breath, crossing my fingers and aiming-to-pass.
Good luck with it 👍
im totally number 3. i got my licence 6 years ago, have not been on the air once yet. i fell i dont know enough about whats available and im afraid im going to get the wrong thing.
Try joining a net, you will be fine 👍
I am starting cheap and even though I do not have high-end stuff, I am thoroughly enjoying the journey. I plan to stay here for a while until I pass my general and then, depending on how I like it, I will make a decision then. Good advice...
Thanks for watching WR, if you are having a good time with it then you are doing it right 👍
Great aproach !!!
Congratulations !!!
Glad you think so! Thanks Joao
@@TheSmokinApe you are definitely a great communicator 🙏
@@jplacido9999 Thanks man, I try 👍
Awesome video and great advice for new hams I wished I would of heard this when I got my ticket !
Thanks Sal, glad you liked it 👍
Awesome list of topics. This is my first of your videos and although I don’t have a ham license I can relate. I did communications in the Army and for a long time was a member of a large (over 2K members) CB Club and we had guys who made most, if not all the same mistakes. Yes, I know many Hams frown on CB’ers but many of us learned and stuck by the rules, especially because back then we were also issued licenses by the FCC. To me it is sad that what I considered the one real thing that separated CB’s from Hams was that Hams HAD TO learn Morse Code. Once that went away I lost interest in becoming one of the “elites” in radio communications. I now found a group out of NY that will help me learn so I’m studying for my Technician level now.
I can say this, the day you think that there’s nothing else to learn as a Ham, is the day you should realize you don’t know anything about being a real Ham.
I recently met a know-it-all Gen licensee that couldn’t tell me how to determine the length of a Dipole antenna for XXX.XXXX Frequency. I learned that as a CB’er 40 years ago and still remember.
Some hams are goofy that way, there’s now way someone can “know it all” thanks for the comment 👍
Great information,... thank you
Glad it was helpful!
Great video. Sage advice. Continue learning is a big part of any hobby.
Thanks for the comment Marvin 👍
Great video - subscribed. I'm a new ham and I think this is all great advice. If you ever meet up with a "grumpy" ham, just remember that a grumpy ham was once a beginner just like everyone else, so maybe ask about how they got started. You might see that "new ham" smile and it will remind them how important new hams are to the hobby - just like they were.
73
KE8SKH
Glad you liked it Airfoil, thanks for the great advice!
Great video with good advises. Thank you.
Glad you enjoyed it!
Thanks for the video! I earned my technician 2-22-21 then my general 3-22-21. I love my newly found hobby. I agree with the financial statement. I was quite embarrassed of my $25 baofeng uv-5r HT at first. I've added a bigger battery, and a better antenna. From all the signal reports I've asked for everyone has said it sounded great. I also have a Btech uv50x2 now it's a great radio as well. I hope I'm able to get a HF radio soon, just can't get past the price... anyways, thanks for the video!
Congrats on passing the tests and welcome to the hobby! Many folks, like myself, started with the UV-5R.
@@TheSmokinApe thanks! I appreciate it!
Definitely some great advice not only on the Ham front but gear in general.
Glad it was helpful!
@SmokingApe I have been looking into ham radio for a while, off and on, and am very hesitant about going for a ham license. The main reason why is that I don't really don't know what people really do on ham radio. So naturally I had looked up some videos on it and the point you bring up about "No when to Rag Chew". Of course I didn't fully understand that term, but looking it up, it roughly means "small talk". Now, I was under the impression that one of the points in making a contact is to have a nice conversation with the person you reached. However, based on what you said about "get in, identify yourself, perhaps mention gear or the weather and then get back back out", had me scratching my head. I looked at other videos and it seems that most people do the latter. While that does seem to be fine for contests or for those just wanting to make DX contacts, I wonder about "rag chewing". I don't see many people doing it. To me, getting in, identifying yourself, talking about gear or weather, all the time, will get old very quickly. If that is what Ham radio is mainly about, then it is doubtful that I would go for a license. I had thought about your "listening" topic and thought about getting a ham receiver only so I could listen to what is going on first, but not sure if I would be wasting money there. As it is, even for a receiver, it costs money and so does a proper antenna. I had thought about going into CB radio first, given that the radios and antenna are fairly cheap and I can transmit as well as receive without having to bother with a license. The downside to that idea is that CB is very limited in range and I don't know what the local CB scene is like here. While there was a huge boom in CB radio usage in the 70's, today, there are many other forms of communication people use instead and CB seems to have gone the way of the Dodo bird....or at least, that is what I as told. However, there are some that say otherwise (here on YT). At least, I learned that that "rag chewing" isn't frowned upon with CB radio. Some even say that CB transmissions can "skip" on the atmosphere, like Ham Radio can, thereby making distance listening possible. So it does make me wonder if I should go the route of CB instead. However, even though I could get a sub $100 system together, I would be quite disappointed to get the gear just to find out that no one is using CB radios in my area. So it is a catch 22. But if all Ham radio is just about making contacts, and being a way to communicate in the case of emergencies, then I don't think that is enough to warrant getting a license and going down the rather expensive rabbit hole of amateur radio.
Awesome episode, just some basic down to earth guidance and recommendations. Keep up the great work/content.
Glad you enjoyed it, thanks for watching Jose!
Good advice for any avenue of life.
Thanks Slam 👍
Thanks for this video. A few weeks ago (while tinkering with an old VHF handheld) I decided to do some research on amateur radio and even looked at avenues for getting my license. Since then I have watched dozens of CZcams videos on the topic, researching every angle I could. I actually ended up with a Baofeng UV-82HP that someone was about to throw away and I began scanning the local repeaters. In well over a week I haven't heard a single conversation (I do hear the time stamps so I know the radio is receiving). I'm in north central Indiana and have been assured that hams are still quite active in the area (despite the lack of chatter). Now I'm wondering whether it's even worth it to join the hobby. Is amateur radio just not what it used to be?
Some repeaters have tons of traffic and some seem to sit dormant for weeks. use repeaterbook to see what's in your area.
Happy jack don’ give up!
Fantastic content man. Wish this was around when I was a new ham.
Keep on being awesome man.
Also.... Team replay for the win!
Thanks NoCode, glad you liked it 👍
I just subscribed. I found myself nodding in agreement as I listened. Much of the information applies to numerous different hobbies. I forget who it was who said it to me, but long ago I learned that respectful criticism, respectfully received, can change lives.
Thanks Roger, looks like we are on the same page 👍
Brilliant delivery,
One thing that really turns me off is people that have become set in their ways after a few years in the hobby.
73, ZL3XD.
Thanks Mike! I’m the same way, different people enjoy the hobby differently and as hams we should respect that 👍
Thanks for your good advice, Take it from a someone who has been a ham for 44 years, and my brother a ham for 64 years.
You bet! Thanks for the comment Joe...
#1 get a licence. The best way to do that IMO is to join a local club where you will get plenty of good advice & support. Remember as you progress up the licence levels your output power increases so take your time acquiring equipment. Less is sometimes more when you are just learning & starting out. Nowdays it is easy to get started locally with VHF/HF before moving into HF.
I would agree, hopefully folks find a decent club that welcomes new folks 👍
Thanks for the information .. I’m a starter and your instructions are usefull!
Glad you liked it, thanks for watching 👍
This is the video I always wanted to see at any stage of owning a radio, it seems I find out much more only after a purchase has already been made & I can never know too much.
Thanks for the comment Wilson 👍
Excellent tips... thank you
Thanks Miciah, glad you liked it 👍
Totally agree with spending money on gear that is useful and within budget. I have an FT3D with a BTech amplifier and a 61-inch Comet antenna on a mag mount (with a cookie sheet as a ground plane). Not super expensive and I can hit the repeaters, analog and Fusion, enough to participate in nets. It is good enough for me until I move out of my apartment into a house, where I can move into HF.
Sounds like an awesome setup, thanks for sharing Andrew.
Sorry for my ignorance but, what do you mean by moving into HF once moving out of your apartment? To me HF=High Frequencies, or is HF also used for gear type?
Remembering to actually **enjoy** your hobby is a much bigger deal I think than most people realize. I've gotten deeply involved in volunteer leadership in other hobbies in the past and forgot to actually enjoy myself, and wound up burning out **hard**. I'm going to be trying to **not** do that as I get into ham!
Yeah, I try to keep rule #1 = have fun! Thanks Mikey 👍
Very intelligent advice.
Thank Michael 👍
Was a member of a club and the only two in the country.
Was not a good experience. Just three of us did our own thing. On the local repeater and the only thing I hear is the IDEA. I just love my hobby. Making antennas. So when the sun spots get better, wow it will be fun. 73 de KQ4CD
Sorry about the club experience but at least you found a path forward to have fun 👍
I'll admit I nearly went overboard on buying new gear, but I just stuck with a Xiegu G106 to keep in budget and be in QRP. Then a power supply. I feel happy sticking within $500. I'm not going into antennas until I have space and advice. I got tacticals and bnc's for HT but I'll get coaxial and 16g wire later.
I like buying stuff just like the next guy but I do think it’s best to make an informed decision. Thanks for watching 👍
Thank you for some sage advice.
Thanks for watching 👍
Great advice. Thanks!
Thanks for watching J B 👍🍻
Good information, really enjoyed it.
Glad you liked it Tom 👍
I sold a few projects that were stalled out to get my radio gear. Sold a car, bought a radio. Sold a set of rims, bought another radio. Sold an old plow truck, yep, bought an amp. WOOT!!! I did buy all new gear, but not the biggest and best, I bought Yaesu, kenwood, Icom, astron, acom, ect. Just not the flagship of any of them. I have been a ham for 6 years, and I have every radio I bought, and I use all of them regularly. I don't feel the need to update all the time. My ftdx1200 runs fine, and will not replace it ever until it pukes. I just remember most people will have better gear, and I will not waste money to try to " keep up ".
As long as your having fun, that's what matters. Thanks for watching and for the comment 👍
Great advice Ape.
Thanks for watching Andy 👍
Listening March 2021 .. new Ham .. great down to earth advice and direction.. thank you ..
Thanks RR, glad you liked it!
the 7300 is a good rig even if you are not a ham , most of a hams time spent on the radio is listening , so if your a tech and like to listen to hf the 7300 is a great way to go and if you up grade you have a great rig to utilize !!!
Very true
@@TheSmokinApe thanks for reply!!
Thank you. I am a new ham with a 7300 and attic antenna trying to find my way.
That’s what we all do, thanks for watching Chris 👍
Good advice for life in general.
Thanks John, glad you like it 👍
Hi from England. Wow!! an excellent video. Passed my foundation and intermediate many years ago and decided to get back into the hobby recently. My current radio.. a 'Yaesu 857d' , with 3 children and loads of financial responsibilities, I still feel guilty with the cost of the purchase even though it was second hand. However as my mentor says, or 'Elmer in the US' , when that radio can't do what you want it to do, that's the time to consider upgrading. Yes I know loads of Ham's with ic-9700, ic- 9300, 9600's, 991a's or ft-dx10's etc etc. however im now operating on QO-100 with that now supposedly 'outdated' 857d and still learning day by day, upgrade time seems a very long way away!!! Enjoy your 'hobby' and steer away from the twinkling lights, millions of buttons, menus and the mesmerising '3D Waterfall' until your really ready ' 😀😀 or put another way 'Dont run before you can walk' !!!.....
Gotta work with what you got, glad to hear having fun with the hobby. Thanks for watching Adam 👍
I'm just getting back into ham....after a long hiatus. Their are so many cheap kits out their....I am like an expectant parent awaiting the arrival of my ubitx kit I will be on the air for less than 300 bucks by the time I get the wire for the antenna ...SWR meter....basic ATU. When I bought my Kenwood TS430S back in the early 80's cost me $1000 that was a lot of pocket money back then!!! We now have Arduino.....great kits....digital modes etc. SOOOOOO much possibility!
Glad you are getting back into it and have a fun project to work on. Thanks for checking out the video TAoE!
Thanks. I'm new and that was helpful.
Awesome Bill, glad you liked it and welcome to the hobby 👍
Excellent job!! Informational, encouraging, and just what I needed. It should be common sense, but there is so little of that to be found these days.
Glad you enjoyed it, thanks for watching Larry!
Great video. Honest, straightforward suggestions. Thank you.
Thanks Matt, glad you liked it 👍
Great video and thank you for making it as a new ham I have been trying to make the best decisions and this video helped.
Awesome, glad it helped Gary 👍
Very informative, realistic, helpful video! Thanks for your work. Well done and much appreciated!
Thanks Tim, glad you liked it 👍
On the topic of "learn the phonetic alphabet", while I agree it's handy and good to know, don't get hung up on it if you have to think too hard about it and/or use the wrong word.
Outside of emergency situations, there are no real downsides to taking your time, making mistakes, or correcting yourself on the air.
Most hams (seriously, the vast majority) aren't going to care if you accidentally say "queen" instead of "Quebec", and the worst you're likely to get from a ham who does care is a "next time use Quebec instead of queen".
This is something I had to learn to get over my mic fright. I still struggle with it a year into the hobby.
I agree. My point was that learning it will make your life easier, that's all... Thanks for the comment!
@@TheSmokinApe yeah man, to be clear I wasn't trying to call you out or anything. I knew what you meant. I just wanted to make it clear to folks that the costs of getting it wrong aren't all that bad.
I bring it up whenever I see this stuff talked about, defintely not trying to pick on you :D
No worries bro, I didn't take it that way 👍
Ham is or can be a tough hobby. Having spent my whole life working ems and real emergencies Ham can save lives. Especially along the coasts If your a bad ham operator your may well cost someone their life by discouraging them from the Hobie.
Thanks for the comment David!
I'm a little worried. I contacted the club close to where I'm moving and nobody has replied. It seems like it's a pretty close knit group of about 20 people. I have been in contact with another club about 50 miles away and they've been great. If I'm ignored, I do the same in return. I guess some people in clubs think you're crashing the party.
Unfortunately that's how some clubs are, best of luck with the new one Philip.
Don't think C H E A P is good. The market is flooded with cheap, counterfeit, knock off, compromised etc gear. Do the research and find a couple of people to teach you to spot that stuff. Also, acquiring commercially produced gear e.g. antennas is not bad. You don't have to build a antenna to be a ham. One last thing when buying used gear, check the price with Ham Radio Outlet, DX Engineering etc. Many times you can buy a new radio with warranty for the cost of what people are asking for used gear. Great video!
Thanks Ron! There is a difference between "cheap" and "value".
Good video, made me laugh a time or two. I'm guilty when it comes to wanting to buy the highest end gear and I've only been licensed since Jan 😂 I'm bad about researching a radio and researching my research 🤔 You've got a great channel and great videos, keep it up. Mike/W5SKK The Anvil Monkey (I'm a primate too)
Right on! Thanks for watch Mike
@14:09 The only thing I am an expert at is doing a Factory Reset. I have become very, very skilled at it :)
Knowing how to factory reset is an important skill 😮
Great vid. Any radio you get will have more features on it than you will ever use. I don't use the first radios I purchased. I have progressed in the hobby so I bought different equipment to suit my changing needs. I still own the old ones because I know how to use them and I can Elmer someone with them If I need to.
Totally agree, thanks for watching!