How to Replace Front Passenger CV Axle Assembly 1999-2005 Volkswagen Jetta

Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ia/1AACV00182
This video shows you how to install a new CV axle assembly in your 1999-2005 Volkswagen Jetta. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
1999 Volkswagen Jetta
2000 Volkswagen Jetta
2001 Volkswagen Jetta
2002 Volkswagen Jetta
2003 Volkswagen Jetta
2004 Volkswagen Jetta
2005 Volkswagen Jetta
Tools you will need:
• Pry Bar 1aau.to/oNe/1AXAA00020
• 13mm Socket 1aau.to/obfY/1AXAA00015
• 16mm Socket 1aau.to/obfY/1AXAA00015
• 17mm Socket 1aau.to/obfY/1AXAA00015
• 30mm 12-Point Socket 1aau.to/o4/1AAST00002
• 8mm Triple Square Driver
• Torque Angle Gauge
• 1/2 Inch Impact Gun 1aau.to/opP/1AXAA00252
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obqQ/1AXAA00016
• Swivel
• Torque Wrench 1aau.to/oauS/1AXAA00044
• 2mm Hex Key 1aau.to/ocz/1AXAA00007
• 3mm Hex Key 1aau.to/ocz/1AXAA00007
• Floor Jack 1aau.to/oVV/1AXAA00068
• Hammer 1aau.to/oP5/1AXAA00091
• Jack Stands 1aau.to/oPj/1AXAA00065
• Punch
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@pauloneill8912]

is the gasket essential . as my new driveshaft came without?

[@kinger557]

Thank you much sir! Bless ya

[@masonnutter6718]

my car broke the bolts that hold the cv axle to the transmission flange

[@mooseknuckle8334]

I'd like to see the driver's side done without lowering the sub frame. I've tried for two days and gave up.

[@cesaramedinasantos399]

another question its, why the 1A web page shows the cv axle and another one that says, new body cv axle, are they the same?

[@jackcurrier5403]

Appreciate the torque specs !

[@TRQ]

+@jackcurrier5403 Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@cesaramedinasantos399]

i have a question, my car its a vk jetta mk3 1999, but when i search on google it shows two different models, the one thats similar to the 2000 and the one thats similar to the 1998, mine its the one before the 2000 model, it works on it?

[@donaldsnyder6201]

Why are the oil pan bolts ready to fall out? Someone should tighten them up. Or is that a trick to get the customers to come back. Lol

[@nebeljc1]

It's this for a stick or automatic? Or does it not matter?

[@TRQ]

+Jahknee This specific part is for models with a manual transmission.

[@Edlyas]

Ball joint should be replaced also, rubber is cracked

[@TRQ]

+@Edlyas Thanks for watching our video! 1aau.to/m/Shop-TRQ