Daaaang, you haters gonna hate! Yeah, it was more than annoying that there was no money shot. Buut, y'all need to understand two things: the water content of any type of cement, mortar, plaster, mud if you will, is relative to the environmental conditions during construction, cure & usage as well as the purpose of the object; annd, using one's foot to hold a straightedge (or to perform other tasks) is no more or less dangerous than using one's hand, iff one has practiced carefully enough and long enough. No worries, I need no chaange back from my two cents. 😉
@@DaleDix 😂😂 he was very cheeky (or nonsense) to post something like that...LOL He even didn't show how he took that from the ground. Actually I don't believe he was able to lift that up
He is an able craftsman you have to keep it for 24 hours for drawing and you will find a very nice product using very simple to use and inexpensive to try to understand the procedure
I wish there was some explanation of what you are using to make this machine/tool with. I can see the PVC but is that plastic or metal or what is that other part and what type of tape or whatever you used on it. Also how long does it take for this pot to dry how many layers do you put onto the thing? How long do you wait between layers?
First use screws instead of tap for templet put some grease so the cement does not get stuck and at the end put some kind of plate so you do not have to do the scraping at the end
As a bigger myself I found this video the more he was trying the more he was distroying he should lifted a little as he was on t hue cement it's to thin layer it will not last it's a shame but good try.
Could I give an advice? Please improve your security methods of work... don't cut any material with you foot so near! Or use safety shoes... It's so dangerous... and I mechanic... it means I know a little about it! Well done... beautiful and exact shape!
No wire/repar type of support in the build = busted pot down the line. Electrical tape to hold the template? May work for this guy on his 1,000th pot but there are better options to make a pot for you folks at home that are no more difficult. Check out Sony Le on CZcams.
Finally he give up and didn't share the final results 😄 Do you really think we have this much time to make a single bowl which worth is not more than 2 or 3 bucks?
‼️❤️VERY NICE ❤️‼️
Good video because I finally learned how to make the circular shaping mechanism
Great template teaching . Thank you so much for your video.
Hola! ✌🏽Saludos desde Mexico 🇲🇽🔥💎
Ahah! Now I know how to make bowl jig. Thanks.
Excellent creativity, I love the simple design and form of the tool used to make such a beautiful pot.
That's an easy way of making a tool thanks a lot . I was looking for a video on how to make one...that makes pot making so much easier ..
Sir..really nice. May I request u to give ur mob. No so that I can talk to u in details.
very nice and is simple to do it thanks alot
Muy bueno el video, gracias por compartir con nosotros su conocimiento.. Saludos desde Paraguay
very nice, would have like to seen it sitting up-right!
Incrível !!!
Parabéns !!!
Very good and easy to follow video, thank you
Muito bom👏👏👏👏
Sou do Brasil. Brigado sua ideia é muito boa
me encanta la tecnica . excelente
Excellent!
Essa montagem deu nó na minha cabeça, mais tenho q aprender,ficou lindo
very nice,thank's
Where is the final result ??
czcams.com/video/HLkiZ22TLGM/video.html
The final result : the pot died 🤣😂
Ficou top 👏👏👏👏
Que material é esse do gabarito?
aluminum composite material
Daaaang, you haters gonna hate! Yeah, it was more than annoying that there was no money shot. Buut, y'all need to understand two things: the water content of any type of cement, mortar, plaster, mud if you will, is relative to the environmental conditions during construction, cure & usage as well as the purpose of the object; annd, using one's foot to hold a straightedge (or to perform other tasks) is no more or less dangerous than using one's hand, iff one has practiced carefully enough and long enough. No worries, I need no chaange back from my two cents. 😉
You make it look so easy
A beautiful thing
秀樹感激Goodです=3
Great vid
waiting for part 2 ....
I only have two toes left, however I still have all of my fingers except three.
Queria como fazer a ferramenta para fazer o vaso
Топ! то самое видео
I will buy rather thanks 😁
great.
Where''s the fing pot?
14 minutes of video and you cut it right im the end... what the hell...
Indah sekali
We watched and didn’t get to see the finished pot. Really really disappointing.
Did you use sand or dirt for your mold. Does it make a difference what you use for the mold
Use damp sand , so it can stick to itself and hold its forum !
Amazing
Are you serious? What is amazing???
@@ninadelisboa That they had the audacity to post it?
@@DaleDix 😂😂 he was very cheeky (or nonsense) to post something like that...LOL
He even didn't show how he took that from the ground.
Actually I don't believe he was able to lift that up
He is an able craftsman you have to keep it for 24 hours for drawing and you will find a very nice product using very simple to use and inexpensive to try to understand the procedure
Drying
I wish there was some explanation of what you are using to make this machine/tool with. I can see the PVC but is that plastic or metal or what is that other part and what type of tape or whatever you used on it. Also how long does it take for this pot to dry how many layers do you put onto the thing? How long do you wait between layers?
Can you send me a measurement of the temple u built
how many mm is the aluminium composite sheet?
Cadê o final do negócio??
No final, quebrou quando ele tentou tirar do chão...kkkkkkkk
Bom dia por favor diga me a medida desse gabarito
Гениально босую ногу использует
Where info on supplies or anything?
Can you please give me the measurements ?
Final result: It broke when he tooks it off the ground
🤣👌🏻
I would have paid money to see that.
That would have justified wasting our time.
😀👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🙏🏻🥰🇧🇷
Can't see the inside of the pot.
Что за материал Вы в начале ролика отрезали?
show the final pot but or it was not well
Although it never showed the end product, it should have ended much sooner.
What type of sand
sharp builders sand, as it holds together better.
Mixing that much water into the cement will weaken it too much- it won't last- great effort though!
First use screws instead of tap for templet put some grease so the cement does not get stuck and at the end put some kind of plate so you do not have to do the scraping at the end
this is the most intense making of a concrete planter on YT.
Is that mud or sand
As a bigger myself I found this video the more he was trying the more he was distroying he should lifted a little as he was on t hue cement it's to thin layer it will not last it's a shame but good try.
रामसजन राजभर
But what was it?
supposed to be a pot, it probably fell apart when he picked it up because it was a stupid idea.
Чем все закончилось ?(
Они поженились и жили долго и счастливо.
Wow. An accident waiting to happen
Verry long time
Didn't show the finished product
Sharp Knife + Toes = No Toes
Probably a million videos in here showing faster ways to make a nicer bowl.
Could I give an advice?
Please improve your security methods of work... don't cut any material with you foot so near!
Or use safety shoes...
It's so dangerous... and I mechanic... it means I know a little about it!
Well done... beautiful and exact shape!
You did no finish
Waste of time. Tysm🙏🏻
Me fumé todo el video y no muestran como queda?!!!
😂
First things you use need to put on screen what size all the tools and name
watch them toes
Kém
Que
No sirvió!
Meh.
Comparison of sand and cement please?
What was that? Pure waste of time. Where is end product? Why do you make such videos ?
That is a very careless way to cut. It’s an accident waiting to happen
⁹город жоб
No wire/repar type of support in the build = busted pot down the line. Electrical tape to hold the template? May work for this guy on his 1,000th pot but there are better options to make a pot for you folks at home that are no more difficult. Check out Sony Le on CZcams.
still inexperienced - too inexperienced.
Come here, i want to teach you how to make it very simple that you .. 😂
Very bad way to end.
บ😮คึ_🎉จ
watch those toe's.......
Finally he give up and didn't share the final results 😄 Do you really think we have this much time to make a single bowl which worth is not more than 2 or 3 bucks?
Ну и дерьмище..
What tha fuck!!!!! Watching the whole entire video and there is not result??? This video should be taking out of CZcams