Inmotion V12 HT | Inner Tube Change Without Spoons

I've heard alot of people popping their inner tube with with the use of Spoons. In my opinion, the spoons are good for taking the tire off and Not good for putting the tire on after replacing the inner tube.
I really hopes this helps someone. Lord only knows how difficult this time can be. I had to figure out a solution how Not to pop my tube. I'm only 135lbs so if I can do this, you can too

[@huukares3152]

Pinched my inner tube with spoons after changing out the rim , that was a pain in the ass alone but i gave up after that , definitely will try this method ,when my new tube comes!

[@reitze01]

I've changed tires on two T4s. Both had pinched tubes from the factory that were obviously done by spoons. Like you I work it on. I've tried stands (work better for bigger rims) and the shims (that hold opposing side like you did with knees). If I have to change another I will use soap like you did. :D

[@TJagness]

Yes. Hope it helps 🙏

[@xgeneralpotatoes4941]

Pinched my new inner tubes but will try this. Also do you know if getting an inner tube with the valve facing away from the tube will hit the side of the euc?

[@TJagness]

@@xgeneralpotatoes4941 I know the valve has to be 90 degree bent. But go on alien rides website or Ewheels website and look for 16x3 inner tube. They will automatically have the ones for the EUC's. There's some on Amazon but I didn't want to trust it for some apparent reason. Also alien rides is the cheapest

[@xgeneralpotatoes4941]

Hey did you have to recalibrate your v12 after doing any disassembling? I used your soap method and it worked! I patched up my original tube. I reassembled it. It was really late at night but I wanted to test ride it but it felt different. Now I’m wondering if I need to recalibrate it. I will try later today