😮💨⚠️🤬 You CANT hurt Warhammer with paint
Vložit
- čas přidán 24. 05. 2024
- Let's roll out the pinstripping tape again for that sweet sweet warhammer 40k and Van Halen cross over
Experimenting in miniature painting is something I do every day. Just trying things to see what happens, there's hits and misses but what im really getting out of it is a database of knowledge that I can use to make the best choices in the future when I'm painting or trying to answer warhammer 40k painting questions
#warhammer #warhammer40k #warhammerbartlereport #40kin40seconds #40kin40sec #warhammercommunity #warhammerworld #gamesworkshop #adeptusastartes #adeptuscustodes #imperium #spacemarines #ultramarines #bloodangels #darkangels #salamanders #40k #40klore #RPG #warhammerpainting #miniaturepainting #spacewolves #spacewolf #imperialfists #speedpaint #contrastpaint #airbrush #tau #aeldari #necron #synthwave #hobby #batrep #battlereport #game #tabletopgame #ageofsigmar #aos #theoldworld #dnd #mtg #chaosspacemarines #orks #thearmypainter #Fanatic #paint #painting #heresyforheretics #horusheresy #worldeaters #primarch #angron #mortarion #squidmar #mwg #ninjon #miniac #angrymarines #nightlords #lightning #painting #capsule #vendingmachine #gashapon #whfb #femalecustodes #custodes #adeptus #nmm #stormcast #blacktalon #whfb #burnout - Zábava
"Can't hurt a miniature with paint" well I sure have seen people try
Technically you can hurt a miniature with paint but it's only on the space Marines and the actual soldier characters and they often don't dilute their paint and it gets way too thick and it hides a lot of the detail otherwise this guy does everything perfect it looks good it's just badass looking
I bought a lot of old stuff on eBay thats was badly hurt
Paint can easily crack plastic, if you use the wrong paint on the wrong plastic
I have seen miniature videos of people squirting paint on minis like it’s a money shot 😂
Easy Off Oven Cleaner. Just spray it, put it in Tupperware overnight and use a soft dollar store toothbrush to easily remove all the paint and primer.
Easy squeezy.
Another sick model and I love how you keep the old saying "can't hurt a model with paint"
Sanguinius: "Alright boys line up for picture day!"
Blood angels: "Oh no not the lazers."
That gradient is absolutely amazing, this is one of the best wave serpents I've ever seen!
U should pinstripe a syntheave and then make the rest of it a different synthwave
Shit, that grav tank looked SO cool with the original burst. Would love to see an army of that
might make that a halloween special. an entire army painted like a candy corn 🤣
I had the idea for a very similar sunset colour scheme for my Tau army a couple of days ago.
Random as hell coming across this video.
You can always strip it and start again. Awesome vid mate 👍
Loving the stripes with the colour
Good news! That ice base that I thought I messed up? Looks freaking fantastic
That gradient is so beautiful, it's a shame to cover it up !! :)
Ohhhh that’s sick!
That looks amazing🔥💖
Van Halen stripes definitwly fit with the Synthwave vibe 😂
I'm just over here drowning everything in Caliban.
FOR THE LION!!!
Models are expensive but a big tub of Biostrip will last ages if you really don't like the result of an experiment. I've been lucky though, I've not had to use mine yet.
Biostrip is freaking magical.
Me over here taking notes for when I finally feel comfortable enough to do more customizing to my Gunpla. 🤔
You guys who can customize and do cool paint stuff like this blow my mind.
That genuinely looks awesome
Awesome!
You should do more yellow to fushia tranistions.
A lot of people sleep on that colour combo
Man only speaks in facts. I love this channel
Best way to eliminate bleed is to embrace the bleed. Doesnt work with a gradient like this (well, it does, but its more complicated), but before you do the second color, apply a bit of the first color over and around the masked areas. The bleed won't be visible because it's the same color, and it'll form a seal that prevents the next color from bleeding under the tape.
That thing looks ready to race big blue
I must know. DID the varnish help?!
I think so. There was still some bleed through and a little tearing. I'm going to try a few more things to see what gets the cleanest results
Pull the tape earlier before the edges get hard?
When you paint on walls and you go to do striping for like wallpaper effects and stuff, they suggest that you paint over with the base coat paint before you actually do your striping because it helps stop bleed. So maybe if we paint the synthwave gradient and then do the pin striping, paint the synthwave gradient again, and then do the black overcoat, Maybe that will help.
@merelii13 that is definitely worth a try!
This guy sure tried to hurt the model.
What was the answer to the Mat varnish test?
Also commenting for algorithm lords
ehhh, inconclusive. needs more testing to see what gets the cleanest resaults. it helped but not that much
I think that’s looks amazing with the new pain look.
ahh so beautiful. Great job.
I think you should check out the technic used by the anime figure painting community. These guys do everything with airbrush and are the master of masking.
I think what you should have used here is liquid masking.
It looks great!
Holy wow that was awesome
I think people forget they can just cover what they've done with a primer and tray again quite a few times before it gets too think, and then you could srtip the paint and go again and again you can paint one mini a multitude of times
Me by the end of this video “ This is stupid and makes no sense but god I love it.”
Every miniature I've ever painted ever
I was really into that but I’m glad to have seen you try it, I too don’t think it hurt the model
So badass!!!
It looked better before the repainting im my option
That really suits The Skittles of Doom!
When I was new. I found an old dreadnought that was just a lump of paint. 0 detail. It was a gift, so I left it in a cup with nail varnish and some water, the next day, the paint just fell off, revealing a stunning mini.
Paint is never permanent in your army.
Free your creativity.
Scary bright
CAN'T?
Challenge accepted.
And number 3 biostrip is your friend 😂😂😂
For what it’s worth, 76 was terrible at first but it’s improved a LOT. It’s a decent game now, though definitely not one of the best. A big thing that got it the deserved criticism at first was a lack of much story and total lack of NPCs which was a very weird choice but they’ve added both.
Pretty sure I've hurt every miniature ive ever had with jusy paint. And then by magic, when i get them out the storage box 5 years later, they've somehow broken into a million pieces...
Where do you get pinstripe tape like this? You've given me some ideas for my orks.
only “how” you paint it (harsh chemicals) and your taste (taste sometimes hurts taste)
Everyone should have a spare falcon chassis lying around.
alot of people did until 10th 🤣
You definitely can hurt/destroy a miniature with paint
Nah ya sure can lol..... Especially when you decide to remove it with the new plastics 😅 my cold ones are now gillie style Hawaiian skirt wearing combat raptors 😅
Been a painter in automotives aquatic vehicles my whole life and that was the only time I had trouble.. then I remembered ultrasonic cleaners😅
Yo is that the one speeder from Star Wars episode 2 that the assassin lady drives
elite dangerous ahh paintjob
You can't a model with paint....but it will hurt my confidence to see how bad I did with it.
i mixed alcohol ink with some paint once but i guess it didn't dry so the primer and glue came off. 😄
miniature was fine i guess, but my dignity not so much
Honestly, I don't think you can tell new hobbiest often enough that you can't hurt a miniature with paint.
Maybe the very best advice you can give a new painter
If you don't like the end result or change your mind later you can strip the model and start over so be BOLD take risk really practice knowing as you improve you can always pull the older models back out and redo them
I liked it before all the varnish
It Does look Cool..... Not sure about 'Warhammer' stuff, but as a model-builder...I would have masked those "Vents" better.....OR..... Cover the vents completely showing that Yellow/Orange/Red colors..... OR .... keep them un-covered to keep that blue color.
If you didn't like it would you strip the paint or just layer over? Returning to the hobby and lost some texture to dry brushing dry instead of a small volume of water, great model but I kinda of want to start from scratch is this common practice, so you ever start over?
Who ever said you could hurt a miniature with paint? Never heard that one. You can waste a lot of time and money though but really there is only one way to learn, time and money.
Do you primarily use the warpaint fanatic range? Going to try my hand at some cyberpunk/synth wave models in your style!
I'd recommend getting some inks they have amazing vibrancy and airbrushability don't try base coating with them though it's hell id recommend liquitex or daller and rouny and yes he does use mostly fanatics now id highly recommend them
@@noelosullivan2325 thank you kindly
my models from 2006 with globs of paint on them disagree 🤣🤣
Yes you can its called 1 thick coat
Use better masking tape, tamiya for example. Your tape doesnt even stick to the model in some areas, no amount of matt varnish can fix that.
And three: It's useful to have other people buy your models for you.
sign me up for that however that happens
Imagine playing eldari
I think you definitely can
Lacquer paint would beg to differ…
I'll be doing a bunch of glow effects on models. Do you have a synth wave flame or glow technique?
im practicing a few fire effects at the moment and theres an Avatar of Khaine video that im about to start filming that will cover, internal glow and flames
You can't hurt a miniature with paint but you can waste a lot of time, time a lot of people in this hobby don't have a lot of.
Everybody gangsta untill you pull up with the pansexual combat vehicles
I know Warhammer is your niche but have you heard of Gaslands
is the music polyphia
It's Jun Juin, an old project of mine that basically became the Walmart version of polyphia 😅
That looks kinda meh so you didn't hurt it, but you also didn't help it either
It's also worth bearing in mind that most of the hurt you do is reversible, and, failing that, removable.
I tried out a new colour pallete for my marine army on a stray marine, then after that stripped him and painted him as a trans flag, no harm done, easily removed with a quick soak in some alcohol
Ever heard of acid
Thats how you know the difference between butter and margarine
What if it's lead paint? Will it hurt then? Or paint made from toxic Xenos blud?
lead paint is more likely to hurt us and if youre getting anything out of any xenos you probably dont have time to paint 😅
depends how many layers of paint ha
The amount of times Daniel got trolled and got let out of jail surpasses Chris Chan except at least he never did doing anything to his mother or grandmother...
can i ask where you found such tape? wondering if i need a hobby shop or a stationery shop!
Actually, it was from an automotive store. Pin stripe tape this one is 3mm. Ypu can also cut down painters tape
@@heresyforheretics oh hell yeah, my buddy works in automotive, lemme see if he has any handy! Thanks brother!
what are you using to pinstrip, is it just masking tape?
👀
You can always repaint it.
exactly!
sir, this is not pin stripe lol
the problem isn't the paint or lacquer it's how you apply the tape tbh, you need to be much more meticulous with it
Question, and this is absolutely not a criticism I swear, just curious on the process:
How come you did this with the turret off? Or do you place the turret later and line up or do you do something different on the turret? :)
The turret I was planning on doing something else with plus I have tow different ones depending in if I need to run a fire Prism or wave serpent
@@heresyforheretics ah, gotcha. Will you upload it when done as I'd really like to see what you do? 👍
Thanks for the reply and the good lesson to take on board.
Go buy cheap models online or whatever that look like what you want to paint kind of then just reuse it to practice painting on if you want a cheap way to get better or see how something looks before doing it.
Much better before
Warhammer is... What?
Sry I couldnt here it, my 3d printer interrupted the video
I’ve seen plenty of models ruined by paint Wtf are you talking about? Stripping usually fka the resin/plastic too. That model probably cost like £60 no way you can’t ruin it with paint that’s just objectively wrong
"cant hurt a minature with paint" you should see some abominations and horendous paint jobs and you may change your mind
You can't hurt a model with paint (unless you don't thin them like a dumbass.)
i think i prefer the original
Apart from dropping the mini, paint is literally the only way you can hurt it. And you just tortured one
So you say lots but I did not hear answers.. Doesstt overspray stop bleed for one? Cummon man these little splash vids are not telling anyone anything..
Buy cheap plastic toys at the dollar store and practice painting on those.
Wrong you can hurt a model with paint, too much paint and you gunk up the details… even if you remove the paint sometimes the paint can’t be removed from the details
Or you can buy a 3d printer and try what ever you want.
I hate this color effect it's so over rated
Kinda fruity
Looked awful at the end. I had high hopes for this too
Looks ugly
Lame