cmASIO caused my Pure Signal to be Inoperative | Thetis v2.10.3.5 | How I restored Pure Signal

I've installed the latest Thetis v2.10.3.5 u1 and successfully configured my Thetis to use cmASIO drivers however, my Pure Signal stopped working and only shows a green bar and not correcting. I reverted both my Anan 200d and 7000dle Mk3 back to Protocol 1 and then reflashed my firmwares to Protocol 2 on both radio without using cmASIO. I'm okay with that and wanted my Pure Signal to work during my SSB transmissions. Thank you for watching!
#thetis
#anan
#puresignal
Donation Tip Jar: www.paypal.com...

[@macchina1969]

Hi! cmAsio has nothing to do with PureSignal. And you do not need to reflash the radio to enable/disble cmAsio. Just rename the regkey "ASIOdrivername" to "ASIOdrivernameTEMP" (or something else) and restart Thetis.
In order to have a stable PS operation you need to hit 0db on the ACL regulary. 73 de Ernst, OE3IDE

[@DarrenN4VFR]

Hello Ernst, I continue troubleshooting and reloaded Protocol 2 and re-tried cmASIO. Also verifying that the ACL Group is at least 0 db. It's working now! Yay!

[@macchina1969]

Yeah, switching from VAC to cmAsio needs some adjustments in the audio-section: MIC enabled, MIC-gain adjustments,...Good its working now!