@@breezetixmoto they’re slightly better than a normal bicycle frame. Still mass produced and made in China by a factory child as well. It’s not the frame I don’t trust it’s the motor
@@breezetixmoto is it not obvious…? They are mass produced cheaply made copies again made in China by a child. They cost less than a hundred dollars, that’s absolutely nothing for an engine and it shows with their poor performance. Overheating easily, extreme vibrations. On top of that it’s strapped to a cheap bicycle. If you want to trust that with your life then go ahead I don’t care and no one is stopping you bro
@@breezetixmotohe’s talking about his head lol a bicycle frame really? By whose standards are these made? Lmao this is for a pedal assist engine not a freaking 10hp motor to go 60mph on bicycle wheels lol!! Bearings, hubs, forks. Nothing on these bikes is dot anything. I’d stick to a moped
57 on a 40 tooth takes 15k😵💫 Also you’re sick bro if it can keep up with the likes of smolik I’m more then impressed you probably have more from to go which is crazy
@@MedicWillCA There's some strange motorized 🏁 bicycle 🚲 people out there. Seen a video the other day, some odd guy claiming these 57mph 15K rpm videos aren't real. Yet a couple years back posts a video of him claiming 70mph on a small 20-ish T sprocket. Dude claims real videos are fake & his fake videos are real 🤪 Probably the result of a fragile ego & jealousy. 😂
@@michaelbrinks8089 My videos are all GPS logged and proven legit. As well as my RPM meter connected to the engine. Most these old dudes are just guessing and Im using real verified data
@@MedicWillCA Yup, pretty easy to see your video is legit. It's just hilarious when they'll say a video like yours is fake. Then put out a video claiming 70 mph on a mostly stock engine. I feel bad if their ego & self esteem is actually that fragile & low. 😂
@@bypcustommotorised6347 Stop being a troll. Always some loud mouth like you trolling when you cant build your shit lol jealous hate comment less! My god!
That's a real performance build right there! You're pulling like crazy all the way to 12k rpm. I doubt I'd ever get the courage to hit those speeds on mine.
Love it. Let me ask u, how do u like those getto bike wheels? I'm trying to decide between the o es u have or the 19" moto wheel set they have. Would love your input.
The ghetto wheels are great, but many people are very disappointed in their service. Might take a year to get, no joke. I like the 26" tires but it seems like a lot of guys are going for 17s and 18s now, even 24s. I would look up Gemini hubs and wheels. They sell them at MBRebel and you can get them in weeks instead of months. All Will Kid is the maker on facebook and he sells hubs and wheels made.
What overlay program did you use? Stupid GoPro only lets me do it on the phone app and then the vid gets super grainy. Don’t want to spend $99 for that 3rd party ‘GoPro telemetry extractor’
Everything you see I have done for free. I use a program on my phone called TrackAddict which records all the data. Then I take that data and put it on my pc with a app called RaceRender. Everything free. If you want to make long videos I think there is a charge but I think 3min videos are free.
Ah that’s perfect, thanks for all the info! My GoPro gps readings are sometimes way off but my phone has always been reliable so big advantage to doing that
Wow so 30 degrees blowdown? If you go WOT continuous from a low rpm is there any ‘lag zone’ in rpm where it struggles a bit with the porting/pipe being out of phase etc? My bikes all have it and some are down to 15* BD. I think my pipe design may be to blame
That nuts bro what’s your set up we would all like to know lol. I’m building two fat bike tomorrow morning nothing like that maybe 45 ish lol.sweet ride.
Essa transmissão é bom pra correr mas aqui onde eu moro região de montanhas não ia dar certo parece que demora séculos pra subir o giro e ainda tem que pedalar na reta
@@stevenharkreader7380 no I'm pretty sure it would . They can take 5hp flat head Briggs no problem. The problem is shifting. If you don't shift right it'll break instantly . The hubs from the 70s n 80s are beast
@@southtexasspecials175 What 3 speed hub you talking about? I was trying to think 🤔 of something better than a jackshaft kit & derailleur for gears and thought if someone built a beefed up 3 speed hub for motorized bikes they could sell a ton. Have a right side fixed gear for your pedal sprocket & on left side, setup for sprocket & disc brake.
@@michaelbrinks8089 a Shimano 3 spped hub. One from the 60s or 70s is ideal Since the new one are extremely delicate. Old one are a lil stronger. You can't miss shift at all or it'll break the lil ratcheting teeth. I've never seen anyone use the set up but me. N I broke my last one a while back n gave up n haven't had a 3speed since . But man you'll love it while it last. I'll help the best I can through here if attempt to get one. Ebays probably your best bet
@@MedicWillCA my next build I have all the parts just need to quit procrastinating and build it lol ride safe brother she sounds awesome it doesn't have a window piston either just Skirted and 1 ring
Hi My friend i hit 50 w My china motor PK 80 MZ cilinder 48 mm w Oz reed and the cilinder is the tranfer Open so is have 4 tranfer righ i did the "third tranfer " no the intake righ now i tunning My carbutetor because the last time running lean i have 98 Main jet and 50 Pilot jet the air screw is one and a half out and nos i close complete because i thing that is the problem running lean ti much air i ley You know how ho running this next monday i hit You Buy messenger bie
God damn son! This makes my bike seem so slow 😂 what's the secret to getting some more power. I've got a pk80 and I don't feel like it could even pull taller gearing than the 44 that's on it.
This is a fully build CNC case Athena 80cc, so ya its gonna be faster than a china doll. But chinas can be fast, just gotta put the work in. Ill be doing a full walk around video of the bike soon keep an eye out for it, it will have all the details.
Paul D.B , use a timing degree wheel and grind some proper port timing as well as proper port shape then you've got to get the carburetor jetted and tune correctly oh yes oh yes and let's not forget a proper exhaust pipe. A CNC case don't make more power it just makes them look cool and cool points don't make HP just being honest here. Any Chinese motor of equal displacement if ported properly and jetted properly capable of doing this and more. But yes it runs good, She rips Aey!
A proper expansion chamber will add at least 1hp on it's own. Aside from that, you can port the cylinder (allows higher max RPM), and add a reed valve with a windowed piston. Adding a boost port or a 3rd transfer port in addition to the reed valve will give you even more power
@@breezetixmoto yeah you're right I didn't realise how much the resistance rises with speed, logarithmic increase or whatever, still could go quite fast however
@@damnthiccassboye7138 the point is the get enough compression and pressure for the rings to set in properly. I run Castrol non-synth for break in then Opti2 syn after that. Both 40:1
Watching you go 57mph on that bicycle just feels like I should see a live leak logo on the screen.
Awesome but stay safe bro.
its a gas frame bicycle. made for motorized bikes going fast
@@breezetixmoto they’re slightly better than a normal bicycle frame. Still mass produced and made in China by a factory child as well. It’s not the frame I don’t trust it’s the motor
@@sasquatch_886 what do you not trust about these motors?
@@breezetixmoto is it not obvious…? They are mass produced cheaply made copies again made in China by a child. They cost less than a hundred dollars, that’s absolutely nothing for an engine and it shows with their poor performance. Overheating easily, extreme vibrations. On top of that it’s strapped to a cheap bicycle. If you want to trust that with your life then go ahead I don’t care and no one is stopping you bro
@@breezetixmotohe’s talking about his head lol a bicycle frame really? By whose standards are these made? Lmao this is for a pedal assist engine not a freaking 10hp motor to go 60mph on bicycle wheels lol!!
Bearings, hubs, forks. Nothing on these bikes is dot anything. I’d stick to a moped
Very nice work. love seeing the metadata on screen while you're riding too. I see the standard that's being set here and I like it.
Great set up. One of only bikes that you can actually hear it come on the pipe. Love it
That power band is mental!!!! Nice setup!!!
That's awesome Will .. you have got that thing flying brother... makes me want to put a fast motor on mine... very impressive bud...
57 on a 40 tooth takes 15k😵💫
Also you’re sick bro if it can keep up with the likes of smolik I’m more then impressed you probably have more from to go which is crazy
just getting started ;)
@@MedicWillCA There's some strange motorized 🏁 bicycle 🚲 people out there. Seen a video the other day, some odd guy claiming these 57mph 15K rpm videos aren't real. Yet a couple years back posts a video of him claiming 70mph on a small 20-ish T sprocket. Dude claims real videos are fake & his fake videos are real 🤪
Probably the result of a fragile ego & jealousy. 😂
@@michaelbrinks8089 My videos are all GPS logged and proven legit. As well as my RPM meter connected to the engine. Most these old dudes are just guessing and Im using real verified data
@@MedicWillCA Yup, pretty easy to see your video is legit.
It's just hilarious when they'll say a video like yours is fake. Then put out a video claiming 70 mph on a mostly stock engine.
I feel bad if their ego & self esteem is actually that fragile & low. 😂
That's pretty impressive 💯👍
That’s awesome bro great video
amazing! that kept reving. thanks for sharing.
Very nice build! 57mph on 40 tooth is crazy even for a minarelli!
No it's not
@@bypcustommotorised6347 Stop being a troll. Always some loud mouth like you trolling when you cant build your shit lol jealous hate comment less! My god!
Nope, all day every Day, 👽👍
It's around 12000 rpm. I'd say that's pretty high!
Love that bike bro nice job
Good god man! Your rippin it right👍👍
That's a real performance build right there! You're pulling like crazy all the way to 12k rpm. I doubt I'd ever get the courage to hit those speeds on mine.
Damnn that rpm is crazy
That thing is sick af.
Love the bike bro awesome.
That’s wicked Chahlee
Totally awesome!
Sweet sounds awesome
That's more like insane!
That thing has pretty good high end!
Especially when the pipe hits at 43mph!
@@dmoore0079 was very noticable when power band kicked in
@@dmoore0079 555
Holy shit! Power band kicked in at like 40
super nice
Deng phat.. that thing took off..!!!
The sound of sweet 🎶 that's nice
Love it. Let me ask u, how do u like those getto bike wheels? I'm trying to decide between the o es u have or the 19" moto wheel set they have. Would love your input.
The ghetto wheels are great, but many people are very disappointed in their service. Might take a year to get, no joke. I like the 26" tires but it seems like a lot of guys are going for 17s and 18s now, even 24s.
I would look up Gemini hubs and wheels. They sell them at MBRebel and you can get them in weeks instead of months. All Will Kid is the maker on facebook and he sells hubs and wheels made.
Nice power band
I listen to that 15k rpm often. It's just music to me
Nice
Great vid bud. And your build is Top Notch!!! What camera are you using bud?
old GoPro4
Fckn love it HELLL YEAAAA
Bro, that mf powerband had me tightening up like I was riding that bish ! 😂
280 main jet damn I didn’t even know they came that big for these small carbs
Oh yes
Was wurde alles getunet? Was für ein vergaser und auspuff sind verbaut?
exactly which engine is this ? my clutch seems to slip cant go past 20mph my 4 stroke doed 37 easy
how you measured G point + acceleration + speed does this a gopro black 5 ? or is it quite more expensive as i expect ...
I do it all from a cellphone for free. TrackAddict
Hey I really dig your build on engine, I'm planning on getting all rdm part but what exactly athena are you running
Athena 80 stroker
@@MedicWillCA thank you good sir I'll look it up
That is a fucking dream.
Wow.
helll yee
Total cost just for engine setup ?
I know you’re running a VM 20. Can you tell me what jet sizes you’re running please?
Im running a stage6 24
What overlay program did you use? Stupid GoPro only lets me do it on the phone app and then the vid gets super grainy. Don’t want to spend $99 for that 3rd party ‘GoPro telemetry extractor’
Everything you see I have done for free. I use a program on my phone called TrackAddict which records all the data. Then I take that data and put it on my pc with a app called RaceRender. Everything free. If you want to make long videos I think there is a charge but I think 3min videos are free.
Ah that’s perfect, thanks for all the info! My GoPro gps readings are sometimes way off but my phone has always been reliable so big advantage to doing that
im afraid of 2 strokes reving high but in fact 4 strokes at high rpm are more dangerous the piston can catch valves and you end up crashing bad
Transmission
Valves will launch off the cam and hang open as the piston comes back and bends it. Stiffer springs solve that.
The piston coming in contact with the valves has virtually nothing to do with you "crashing bad" 😂😂😂
Jeez that 40-57mph band sounds scary
ya that kx85 pipe hit is no joke. Even a cr80 or scooter pipe is so much smoother.
But its kinda fun to be honest :)
👍👍👍👍👍👍👍
Ohh wow. Kinda mix you running? Subbed. Thanks for the ride.
40:1 Opti2
@@MedicWillCA hey, thank you.
Just a question did you do the normal port and polish to make it go that fast
no porting, just polish. The cylinder is spaced for 180/120 timing
@@MedicWillCA okay true I see what you mean if I take metal away I can't put it back
Wow so 30 degrees blowdown? If you go WOT continuous from a low rpm is there any ‘lag zone’ in rpm where it struggles a bit with the porting/pipe being out of phase etc? My bikes all have it and some are down to 15* BD. I think my pipe design may be to blame
That nuts bro what’s your set up we would all like to know lol. I’m building two fat bike tomorrow morning nothing like that maybe 45 ish lol.sweet ride.
the start of the video has all the details :)
@@MedicWillCA minareli?
@@integrationofmanandmachine4714 Athena 80 stroker
My bike does that second wind thing at high rpms where it just dumps outta nowhere and really goes
That’s called a power band
Essa transmissão é bom pra correr mas aqui onde eu moro região de montanhas não ia dar certo parece que demora séculos pra subir o giro e ainda tem que pedalar na reta
what is the model of this cdi that does not limit?
its a ktm50 ignition
Dude all you need is a three speed hub n. That thing will be insane
@@stevenharkreader7380 no I'm pretty sure it would . They can take 5hp flat head Briggs no problem. The problem is shifting. If you don't shift right it'll break instantly . The hubs from the 70s n 80s are beast
@@southtexasspecials175 What 3 speed hub you talking about? I was trying to think 🤔 of something better than a jackshaft kit & derailleur for gears and thought if someone built a beefed up 3 speed hub for motorized bikes they could sell a ton. Have a right side fixed gear for your pedal sprocket & on left side, setup for sprocket & disc brake.
@@michaelbrinks8089 a Shimano 3 spped hub. One from the 60s or 70s is ideal Since the new one are extremely delicate. Old one are a lil stronger. You can't miss shift at all or it'll break the lil ratcheting teeth. I've never seen anyone use the set up but me. N I broke my last one a while back n gave up n haven't had a 3speed since . But man you'll love it while it last. I'll help the best I can through here if attempt to get one. Ebays probably your best bet
Can you make an inline 5 out of these and then it will sound like F1 v10 and 15k 💡
40 tooth wheel sprocket, 10 tooth engine sprocket, 26 inch tires, 15000 rpm = 70.97 mph
Thing flys when the clutch holds and you got a good straight with no traffic lol.
come to the track and watch me fly past you with all those excuses
Don’t let all that ego go to your head bud 😂
@@wtmotobikes8838 lol totally joking Im a rookie
I know. I thought it was pretty funny. Be cool to see you out at the track man. More the marrier in SoCal racing. There’s only a handful of us.
Braping brother
What motor is that
the start of the video has all the details :)
Which RDM billet case you running? Ktm 50cc ignition?
yes
@@MedicWillCA piaggio long block?
@@austinjoslyn170 Athena 80
FCK yea .what engine is it?
What motor is that bro
the start of the video has all the details :)
Is this the stock athina or does it have a window piston
stock
@@MedicWillCA my next build I have all the parts just need to quit procrastinating and build it lol ride safe brother she sounds awesome it doesn't have a window piston either just Skirted and 1 ring
What mod got you the most speed increase?
32t sprocket a good pipe and a good carb will get you there. I ran 50ish on a 36t with just a pipe and a head. Good jetting also. No filter or cover.
exhaust will give the most increase everywhere on the RPM.
can it idle at a stop and start moving without pedalling though?
ofcourse
@@MedicWillCA nice, i need to pedal to start moving again on my bike then i can use the throttle
@@renardstan19get yd 100
when it hit powerband 😩
Just damm he'll ya
40t rear sprocket?... With all that clutch play hummm what about the pinion ? You have a 280 main jet?
Anyway nice job that bike is crazy
280? No. I think it was 120 on that video but also with a power jet
@@MedicWillCA okay okay yeah but check on the video tutorial says 280 main jet okay buddy good job !
which size is the power jet_
@Ricardo Teixeira Carromeu it's a adjustable power jet by knob
@@MedicWillCA okay okay nice the power jet orifice you don't know the size
When it’s accelerating it sounds like a four cylinder engine
Where can I get one of those exact motor kits that's on this bike in video
RDM
@@MedicWillCA is that the name brand and what is a good website to get that exact setup
@@paulcatanzaro3046
rdmanu.com/
They dont sell my setup anymore but they sell the even better Paiggio now. Case reed.
I still have athena 80 and many more based in Australia
@@bypcustommotorised6347do you still have them
15k rpm damn
Mine doesn’t even reach 9k
Does the thing vibrate a lot?
Just normal motor vibrations, its very smooth
@@MedicWillCA please can you show what modifications you have done to this motor I'm very interested in how you have done this ?
@@MedicWillCA definitely a well balanced crank in that motor
What carb size?
24
Makes me want to ditch my Ebike!
Anda de mais
that clutch is screaming for help tho lol
until I hear the safe word that she gonna get it HARD 😆
@@MedicWillCA truth lol
Hi My friend i hit 50 w My china motor PK 80 MZ cilinder 48 mm w Oz reed and the cilinder is the tranfer Open so is have 4 tranfer righ i did the "third tranfer " no the intake righ now i tunning My carbutetor because the last time running lean i have 98 Main jet and 50 Pilot jet the air screw is one and a half out and nos i close complete because i thing that is the problem running lean ti much air i ley You know how ho running this next monday i hit You Buy messenger bie
What oil do you use?
Opti2 40:1
@@MedicWillCA also what reed valves do you use I want to build an engine for 10k plus rpm but can’t find reeds that won’t flutter at that speed
@@catsnponds5959 I use vForce
God damn son! This makes my bike seem so slow 😂 what's the secret to getting some more power. I've got a pk80 and I don't feel like it could even pull taller gearing than the 44 that's on it.
This is a fully build CNC case Athena 80cc, so ya its gonna be faster than a china doll. But chinas can be fast, just gotta put the work in. Ill be doing a full walk around video of the bike soon keep an eye out for it, it will have all the details.
So you did this build on your own or did you have custom made?
@@tomrockhill8634 Its an RDM engine that I have customized
Paul D.B , use a timing degree wheel and grind some proper port timing as well as proper port shape then you've got to get the carburetor jetted and tune correctly oh yes oh yes and let's not forget a proper exhaust pipe. A CNC case don't make more power it just makes them look cool and cool points don't make HP just being honest here. Any Chinese motor of equal displacement if ported properly and jetted properly capable of doing this and more. But yes it runs good, She rips Aey!
A proper expansion chamber will add at least 1hp on it's own. Aside from that, you can port the cylinder (allows higher max RPM), and add a reed valve with a windowed piston. Adding a boost port or a 3rd transfer port in addition to the reed valve will give you even more power
Duuuude the g meter goes off the graph literally
Could you give me the number for that spark plug please
Its been a while I dont remember exactly but I believe its a NGK BR6 or 7
@@MedicWillCA thanks
These had prices have me on this video show me how
I hear slippage
Have u registered it the road! Take it ur America
its legally a bicycle ;) No need to register or license anything
Are u in uk?
I should have you build engine for me.
If you need help with anything just hit me up
With a gearbox you could probably do 200mph 😂 this is way more fun though
not on a motor bicycle you cant, the engine probably puts out around 10hp or so so not possible
@@breezetixmoto yeah you're right I didn't realise how much the resistance rises with speed, logarithmic increase or whatever, still could go quite fast however
Sounds great but not 15 k maybe 12 k at best
sick!! but OOF!!!!! youre engine braking on a 2 stroke thats a sin!
If you tuck, you'll easily hit 60mph+
probably true
@@MedicWillCA it's just aerodynamics. Try it
@@breezetixhv I hear you, I agree. Step by step :)
That must be bad during break in
nope, thats the best way to break them in
@@MedicWillCA so break in in period is what if you just go into its max rev the first start?? What mix are you using ?
@@damnthiccassboye7138 the point is the get enough compression and pressure for the rings to set in properly. I run Castrol non-synth for break in then Opti2 syn after that. Both 40:1
Dude you slip that clutch a lot. Be nice to it.
I use the best clutches with the best pads and beat the shit out of them all the time. No reason to be nice ;)
That’s not a Harley Davidson 😂😂
57mph ? on a bicycle ? Do You not fear death ?
Nah I wear all the gear from knee to elbow pads and helmets etc. Jackets. All stuff for much faster motorcycles
@@MedicWillCAbare arms are showing
Noise pollution is getting worse.
LOL. Only simps like you consider it pollution
I have the real silver bullet,, since the 1990s. Change the name of your bike..
beat me in a race and the name is yours
Nos hahaha 😆 😂 🤣it fikin Rips