VR6 TURBO on 1.9Bars of BOOST!!
Vložit
- čas přidán 11. 04. 2024
- Our mk3 VR6T went on the dyno and preformed very well.
I think that the decompression plate combined with the dual-headgasket makes the compression ratio "to low", so we needed to push the turbo to almost 2bars of boost!!
We'll change the compression ratio to 8.5:1 very soon, to see the difference.
I can't wait to see this car fly on the Mexico roads.
Let's go!!!
MLS Headgasket and ARP headstuds
Love your videos 👍🏻
Impressive 🎉 sounds strong❤
Just a suggestion. I would regap the spark plugs to try and stop the sputtering at low rpms. If you have them gapped at stock (0.28) I would bring the gap down a bit. It almost sounds like the gap needs to be widened. Generally you wanna bring a set of plugs with you when you’re at the dyno
What an amazing machine guys 🫡
Sounds glorious.
such a sick car!
that thing is sick !
bouw ook een brand blusser in de auto of een schuim blusser.. nu is het je koppakking daarna misschien olie lijn zal zonde zijn als het te laat is
Pohhhhh wat een beest 🥰 lekker hoor gasten!
i would re-do fuel system.. in every pull you did it could be heard it was breaking up.. lower gears were fine, but i think in 3rd it started and 4th was all the time misfiring.. could be fuel starvation or something on that note (fuel pressure droping)..
You all should FireRing the block and head see if that keeps the gasket in there. iv heard the only difference in Crush pressure on head to block is only 0.048 or somthing. Love the car sounds badass and love watching your content buddy please keep the post coming would be dope to meet you one day.
Mooi gemaakt mannen blijf ons vermaken met leuke mooie filmpje jammer dat de koppakking er uit klapte
DAm headgasket!! ooooffff
Would of been mint on 1.8 Bar, you've put on the thicker head gasket from a sharan VR? C/R lowered too much?
Wastegate no extension. Straight on the manifold
I'm finally first😂❤
What spoiler is that
Hiervoor kun je geen oem papieren koppakking gebruiken
N check ur plug gaps ‘ run bkr7e gapped at around .24