Alfa Laval S type purifier Full animation

Sdílet
Vložit
  • čas přidán 2. 01. 2019
  • Any material for marine engineering you can find here:Bonanza:www.bonanza.com/booths/mike1984
    Hello guys more educational videos coming every week.
    Stay tuned to AdventureStory Channel.
    Don't forget you are the Channels Heart.
    I like when you interact with comments.
    ------------------------------------------------------------------
    Be part of Adventure: / @adventure-story

Komentáře • 59

  • @artemvaragyan3139
    @artemvaragyan3139 Před 5 lety +1

    Now all good!!! Thanks...

  • @prantabarua6367
    @prantabarua6367 Před 4 lety +3

    what's the function of operating slide and holder?how those stuff works during de sludge mechanism?

  • @jasontam644
    @jasontam644 Před 3 lety +1

    FUTURE ENGINEERS WILL WATCH THIS😏👍👍

  • @dreambigwav
    @dreambigwav Před 3 lety +1

    man this 3 min intro + music + 1 min outro is so 2010 keep it up

  • @InvisibleSniperGhost
    @InvisibleSniperGhost Před 4 lety +1

    Your videos are incredible !! And if you could to answer one question of mine it would be great. I can't find what is the use of the pipe that is placed on Machine bottom part. It appears on your video at 5.10. We see it on overhauling. At spare parts haves it as pipe. Is it to fill th bowl with water???

    • @Adventure-Story
      @Adventure-Story  Před 4 lety +1

      Hello as i see this is the vertical shaft inside which transfer rotation to the bowl. Here in the video it shows complete .

    • @InvisibleSniperGhost
      @InvisibleSniperGhost Před 4 lety

      @@Adventure-Story thank you for the help, but i can't find not in a video, not in the manual what pushes the operating slide down ( 6.20 at your video the red part ) and the discharge starts

  • @gkscosmos
    @gkscosmos Před 2 lety +3

    Video starts at 2:40
    Thanks me later 🙂

  • @remos41
    @remos41 Před 2 lety

    The main part is missing in this animation is the left hand threaded lock nut after removing the cap but

  • @user-se2zf7xp6l
    @user-se2zf7xp6l Před 4 lety +1

    Hello, Mike. Can I ask a question to you? How exactly does the paring tube work? I'm trying to imagine but I cannot. If you have time and desire, try to explain please) Spasibo))

  • @mohibbullahniaz5349
    @mohibbullahniaz5349 Před 3 lety +1

    sir, explain about Gravity disc and working principle of gravity disc.

    • @Adventure-Story
      @Adventure-Story  Před 3 lety +1

      Gravity disc will been selected depending on fuel density and separating temperatures. Always read the manual before do anything.
      Also there is difference between manufacturers.

  • @arkadebchakraborty4743
    @arkadebchakraborty4743 Před 4 lety +1

    Sir what is the pressure inside the purifier in working conditions...if possible plz tell me the how the Desludge procedure is carried out...

    • @Adventure-Story
      @Adventure-Story  Před 4 lety +1

      Hello inside bowl the pressure is close to outlet pressure which each purifier is specified to be working .
      So calculate in Mitsubishi Purifiers there is 0.15Mpa which must be enough to push back to Service Fuel Oil Tank.
      Dis sludging take place for a short time of millions seconds at the end of the programme. Bowl will open and all dirty will be thrown to peripheral which will lead sludges to sludge tank.

  • @sivarajanradhakrishnan6410

    What is that arrangement with spring at 2.55 and what purpose does it serve??

  • @rahulpasalkar
    @rahulpasalkar Před 5 lety +1

    👍

  • @shahnawazalam5194
    @shahnawazalam5194 Před 3 lety +1

    Sir, do you have the machine drawing of all tge parts used in this separator? Can you provide me pls.

    • @Adventure-Story
      @Adventure-Story  Před 3 lety +2

      Hello Alam i don't have any drawings but i will try to find some!

  • @yogeshthakur3857
    @yogeshthakur3857 Před 3 lety +1

    Is there any chance to water come from purifier outlet with fuel pls tell

    • @Adventure-Story
      @Adventure-Story  Před 3 lety +1

      Yes sure there is always this possibility if purifier is not adjusted properly and interface will move to centrifugal pump.Thats why is really important to check service and settling tk for any moisture and water collected.

  • @mridulvijaybabu457
    @mridulvijaybabu457 Před 4 lety +1

    hy sir ..pls explain how to use gravity disk for different density fluids ?

  • @paulgerardboquiren17
    @paulgerardboquiren17 Před 3 lety +1

    I have a problem in my alfa laval purifier. Why is it that the bowl is always discharging? Then the discharge pressure drops and it stops the purifier. I hope you can help me. Thanks.

    • @Adventure-Story
      @Adventure-Story  Před 3 lety +2

      Hello dear friend as know if purifier is always discharging probably it is dirty.How long you have to make maintenance on this purifier?

  • @vaiz389
    @vaiz389 Před 5 lety +1

    Sir ,whats the use of valve plugs in operating slide of purifier

    • @Adventure-Story
      @Adventure-Story  Před 5 lety +2

      Hello Vaisakh if i understand correct you mean pilot valves .The purpose of this valves is to open and close bowl with sliding piston moving up and down at adjusted time.The opening of bowl is necessary to discharge any heavy deposites accumulated through cleaning process inside bowl.

    • @kingkoyscorner3511
      @kingkoyscorner3511 Před 4 lety +1

      the valve plugs will seal the drain ports.. so that the bowl will close...

  • @collinloimingung4965
    @collinloimingung4965 Před 2 lety +1

    Took 3min to show messy transition video inform of the main course

  • @soneraktas6888
    @soneraktas6888 Před 4 lety +1

    thank you sir .ı have a questıon . please tell the movement of operatıng slide and holder durıng the dıscharge process and also the tracıng of water durıng dıscharge process?

    • @Adventure-Story
      @Adventure-Story  Před 4 lety +1

      Hello dear friend ,
      Discharge operation is activated by water supply from solenoid system and control unit time is pre set so there is correct amount of water.Watet can be traced from drain which is located close to purifier also you are able to measure the quantity of water supplied for each operation.
      The only thing you need is a buckey and watch.Hope this help you!

    • @guigiburze3553
      @guigiburze3553 Před 3 lety +1

      @@Adventure-Story question Sir, the operating slide is very hard and thick and is secured with big nut. How does it move up and manage to close the bowl? Does a hard metal part become flexible because of centrifugal force? is there any law about centrifugal force that can explain further? thanks and hope you can help me

    • @Adventure-Story
      @Adventure-Story  Před 3 lety +1

      @@guigiburze3553 Hello as i have seen most of purifiers are closing with water coming from the bottom .Metal parts are difficult to bend or have flexibility.
      Water apply from the bottom and move the sliding piston and seal with teflon surfaces the bowl. This is the most common operating principle.
      Thanks!

    • @niski23232
      @niski23232 Před rokem +1

      @@guigiburze3553 Yes it bends, it is secured with a nut so it can't move up and down but it deforms/bends during discharge

    • @charlesardrenbermudez8657
      @charlesardrenbermudez8657 Před rokem +1

      In what way it bends sir? Through what force? Opening water or centrifugal force?

  • @julesfilsedner9592
    @julesfilsedner9592 Před 2 lety +1

    Demontage complet du separateur

  • @kumaranimesh1776
    @kumaranimesh1776 Před 2 lety

    Sir, why only 3 friction pad is provided when there are more slots in a purifier friction boss .

    • @Adventure-Story
      @Adventure-Story  Před 2 lety

      In case this slots will brake you can use the other one.

    • @khairaamira6516
      @khairaamira6516 Před 2 lety +1

      its depend on which power supply you are using..50hz or 60hz..

  • @bibi-eh1lp
    @bibi-eh1lp Před 4 lety +1

    Hello..you are from ex Yugoslavia?

  • @geeorbarosanu6945
    @geeorbarosanu6945 Před 5 lety +1

    Hello mike, i.ve got a question for you, can you tell me what type of pumps are used for the recirculation of lub oil for the main engine? Im talking about the ones which are located next to the flywheel(main engine lub oil pumps) and also can you tell me the name of one( like manufacturer and more ) because i want to study them in close. Thank you so much!

    • @Adventure-Story
      @Adventure-Story  Před 5 lety +2

      Hello Geeor this pumps on the flywhell is centrifugal pumps called Main lub oil pumps.This pumps have a big consumption of power.The work of this pumps is to keep a constant pressure in the line so lunrication take place in varius components of engine from crankshaft ,camshaft,allthe bearing,chains etc.In case that pressure will go down engine will ne shut down by engine safety system.Other info about this pump is that have big weight and long base inside sump the rpm are steady.In korean ships i will find korean made motors and pumps in most cases but some times motor is korean and pump will be japanese.Thanks!

    • @kaushikshubhangkar8419
      @kaushikshubhangkar8419 Před 5 lety +1

      @@Adventure-Story Its positive displacement gear or screw type pump, not centrifugal p/p, to maintain constant pressure its also important to maintain the filters also, always have to keep an eye to the motor load ampere not only the pressure gauge or filter clean level gauge, thank you, pumps manufacturers are from germany, japan, croatia, denmark, polland, italy, and they are very common, motor's manufacturer is mostly ABB, Siemens, Denso, bosch from various country

    • @boy10413
      @boy10413 Před 5 lety +2

      Mostly used onboard are centrifugal pumps including lube oil pumps.Gear pump or screw pump are rarely used.. maybe u just experience it by your own but not by everybody and please, if u correct the uploader explain it in a pleasant manner. Ok

  • @julesfilsedner9592
    @julesfilsedner9592 Před 2 lety +1

    Donne moi les responses en français

  • @artemvaragyan3139
    @artemvaragyan3139 Před 5 lety +1

    Please bro....I need simulator engine room... Please give me !!!I need study

    • @Adventure-Story
      @Adventure-Story  Před 5 lety +1

      What is the problem that you have to load the simulator?

    • @giorgipotelidze1297
      @giorgipotelidze1297 Před 5 lety

      @@Adventure-Story How load the simulator, can you writte there link?

  • @rjhaemanuel6459
    @rjhaemanuel6459 Před rokem

    Too long introooo😂