Easiest unlock speed to 35km/h for Ninebot max G2 after update - replace to unlocked controller.
Vložit
- čas přidán 1. 04. 2024
- Order here: bit.ly/G2controller
Video of controller change procedure. If you already updated your firmware to the lastest, so there no easy and cheap solution left. So to chenge the controller to already unlocked its easiest solution to get 35km/h.
We sell prepared controllers, so you would need just to swap controllers, no need to activate ar flach anything, just change the part and you can use it normaly, you can connect it to Ninebot app and update, the speed will remain the same - up to 35km/h
Order here: bit.ly/G2controller
we ship to all the world
Does it really work? Just simply replacing the controller and then you can run it to 35kmh?. Or still you have to register it once again in the app?.
What torx did you use?
Hi. I bought used display for my ninebot Max G2 but I can't connect to it probably of code. Have you any idea how to reset or remove this code?
If I'm on the latest firmware all I need is to replace the controller or do I also need to change some settings to unlock the speed?
Replace the controller.
I purchased a new controller, what software should I use to change the serial number? iOS
I was looking this to see does this controler work, what will i get, but except seeing how to untighten/ tighten screws, nothing...
Yes makes sense, that its not showed that its actually goes to 35km/h. But it goes then you swap controller to unlocked one with USA serial number. Now thare also 40km/h version available! :)))
Can we after replacing with new controller and changing the serial with xiaodash is it safe to connect to official app and do the updates ? I mean it won't effect the changed S/N and limit it to 25km/h again?
so I've tried this and once you replace it the scooter will start beeping the same way it does once you run it for a first time and will not start until you register it with the app. If you try to register it with the app it will tell you that the serial numbers do not match and you have to pop your old controller in as this does not work!
I see' plug n play doesn't seem to work since you have to register it once again'?.
@@dobroslavgeorgiev8376 you have to unbind it from the ninebot app first, than bind again with new controller
108.90 eur cia kaina uz tai kad atvezate preke i namus, atvezat alaus, patys pakeiciate, aplaistot su klientu ir duodate 2 metu garantija ?
hahahahahaha, just buy STLINK for 10 euros, and do it urself so easy man, this is crazy 100 euro
#Shift lt Hello, after replacing this controller, you need to enter the original application and pair the scooter again until it is detected under a different serial number and connect it and then it is already unlocked and you can increase the speed in the application to 35??
Is there a way to unlimit Ninebot F2 plus?
With the new update it no longer allows you to do it with xiaodash by changing the fourth digit.
Some light please, thank you!
Hello, so probably its the same as for G2, just replace controller with onlocked one, or buy a new from factory ant change fourh digit to "S", so it will be global version :)
I bought from you this controller and not work. Dont see power button when i try to start.
Still have problem? did you connect everythign right? As we sold 100+ controllers, we test all of them before sending, so it must be working :) did you really bought from us?
Yes, it is bought from you. Not working. Does not see start button. when I connect the plug it lights up briefly for 3 seconds and then goes out and doesn't light up anymore. The old one works. I sent the video by email but I have not received a reply yet
50€ on aliexpress btw
Link please 🙏
Link please 🙏
7:00
I have changed my controller but the problem now is that my scooter is showing error 35, I tried to reset to factory setting in order to connect to Xiaodash, but I still can't change the region, I tried to put the code of my previous scooter which was unlocked but it didn't work, any idea of to solve this, please?
Where is unlock process, this is not unlock, its how to replace controller ??!!
You don't deliver to United Kingdom :(
i unlocked mine in 2 minutes without undoing a screw BLE scanner off play store s22
35kmh
We deliver to all the world! just write of if there no shipping option in cart. ;)
If there is any place in germany that I can come and you can help me guys will be good 🤑
Cancelled my order after I saw this video.. 😢
Its not that hard, as all connections ant plugs are different, so just unplug from one ant plug to other :)) but yes it takes some time :) But nothing really hard :) Its easier to bring scooter to scooter service center and pickup then its done :)
@@TomasValaitisDryou are Greek?
@@TheBIGsokinNo, Lithuanian :) but i was told then i was in Greece that its like greek
i unlocked mine in 2 minutes without undoing a screw BLE scanner off playstore s22
我有40KM/H的控制器
I already bought this controller and tried this. It doesn't work, it says the serial numbers do not match once I open the app and try to register the scooter..... scam
You need to change the serial number to the one that's on the bottom of the scooter using SHU app.
@@borky1987 I'll give it a try tomorrow. Hope it works and thank you for the response!
А где это приложени искать
@@dobroslavgeorgiev8376получилось???
@@user-gv1ti2vi4s ниет. Serial numbers still don't match scooter is beeping and doesn't want to run.
Why not just change the country to USA? You get your 35km/h that way. No hardware necessary.
It doesnt work on european nought scooters. If it is universal bought then yes but not if like to germany specially you get it?
@@jaakkohartikainen1992 Ther is another version ? Spain with no limit?
128 euros,? Haha 😂 and only until 35kmh
😂😂😂😂 weiter verarschen 😂😂😂
?