First off Chris Kyle is known as one of Americaâs greatest snipers. He was a US Navy Seal and his rifle of choice was the McMillan Tac .338 or .308. Youâre one of the only guys Iâve seen make reference to him and your in the UK so the fact that you recognize him is amazing and it means a lot for you to mention that. Secondly Iâve been considering picking one of these SSG-10s up and this video along with many others just helps confirm that this is a great first rifle. Probs to Nov!!
If all of your gun reviews are like this then you definitely deserve more attention from the Airsoft community. Great and in-depth info along with good camera work and a friendly manner about you
Really great thorough review - I like the look of the A2, but the A1 version is one I find really interesting. ÂŁ270 or âŹ299 (SSG10 A1/VSR10 clone)for a Novritsch rifle that's basically internally identical (near enough) to the other Nov rifles to me is ridiculously cheap - when you consider the cost of cheap clones and quality upgrades as you mentioned. On a wider Novritsch point - I'm not even an airsoft sniper, but by releasing rifles of obvious quality at such a low price point(ÂŁ270) not only is he stepping on a lot of manufacturers' feet, he is making higher level airsoft sniping more accessible(for years airsoft sniping has been difficult - rifles being temperamental/expensive etc). If it works well then great, if not, it needs to be called out. Overall for us consumers/players, it's absolutely fantastic. Going to watch the subsequent review next.
Bjarke Hansen itâs a Rhino scope, pretty old though, I donât think you can get them anymore but you can have the same look if you fit a sun shade to many scopes that have a thread at the end. Just check the models. Thanks for the feed back đđ
@@BIGBIRDSAIRSOFT yeah I didn't get my Nov stickers either ha. Tbh he claims to be such a small company I would expect better customer service throughout. I paid for there premium service on the sat. They didn't send it til the Wednesday. I feel this was because I said I would cancel the whole order otherwise
@@hal752 every SSP1 comes over oiled. A lot of people from different countries buys them so they have to account to what happens during shipping overseas. Whether you buy a SSP1 or a SSG10, make sure you CLEAN your weapon first before using it.
@@saintjellies not all. I had a friend order one at the same time as mine. Although in the states. His came mostly dry. I presume it depends on who "tests" prior to shipping.
@@picklepeg1 It definitely can. Make sure you clean your inner barrel first before using it. Also depending on the spring that you use, make sure to use the right ammo for it. If you got the orange tip at the end, remove that crap immediately or your shots will be wild. Or take off your orange tip, drill into it to make it wider and then put it back on.
You just gave the best airsoft gun review I've ever seen. Great review. You are the Rick Sheils of airsoft gun reviews. I have a amboea striker as01, and I've been thinking of adding the larger cylinder from ares. Do you know much about them? Are they any good or do the job they are supposed to? And lastly, do you know if there are any issues when it comes to installing them? Can you change the springs still with the one piece cylinders? Thanks
I have fully upgraded AS01. They are great when done, but do the full upgrade in one go. Cylinder, barrel, hop etc. The sears are okay to leave. You have to make sure the cylinder hop engagement is good though. Just be aware, itâs loud!
How many shots did you put through the hopup-bucking before the shooting test? The maple leafs usually needs a couple of hundred shots to really break in. Great review, cheers!
When other reviewers say it have a rubberised feel they are speaking about the A1, which is a JG BAR10 stock. And yes, thatâs rubberised, and in fact a bit shitty because of that.
SSX23 have issues that other mk23 variants doesnât. Including the STTI, made in the same factory. For example, the SSX23 lose quit a fair amount of energy when you fire the pistol with the hammer cocked, compared with the double action shooting operation. You have problems on leaks from the contact between mag gas router and noozle too. So, if you push the SSX23 mag up on the grip, it will get more energy on the shots.
Parcel farce, god bless um, spare a thought for the driver it looks like you were drop 82 one day and missed you and drop 147? The next day, love the gerber- let's go for a tiny Swiss army knife next time and really lower the ante. Love the vid, subscribed
What weight bbs would you recommend for the ssg10? I have one on the way and ordered 0.43g bbs with it because I was worried 0.46g would put it over the 2.32J limit for UK sites
.43 are fine. Play with it, learn the limit of the gun, try .4, .45, .48 even .36 under different condition, maybe try different bucking, a tdc.... This is how your learn, throught trial and error
@@Uria-jz1gu I was mainly concerned I wouldnât be able to use the gun if I used too heavy of a bb weight. 0.43g puts me just under the limit and works perfectly so Iâm gonna stick with that đ
Good job. Just received mine and think its nice. If you clean the barrel and hop bucking bet you get a better grouping. Did you chrono with heavy BB's? I did and was getting 2.52j on 0.48bbs
churnsides4 youâre absolutely right about that, Iâm going to strip, clean and re-lube it this weekend. I was using 0.45 Geoffs BBâs, which were skimming around the 2.2j. Enjoy the rifle đđ and thanks for the feedback.
All novritsch guns are manufactured by other airsoft Companies. Upgrades are so hard to find and rifle is expensive with lots of pot metal internal. others store products are cheap chinese rebrand that you can find at ali or ebay.
Kai Jackson SRS A2 for me. It is better made, great out the box and if you fit a hop and barrel, in a different league. Itâs also lighter, shorter and much nicer to use. You can make good use of the extra air volume with the heavy ammo.
Kai Jackson I put a 2j Rapax spring in and itâs at 470fps. You could also drop a 3j in and trim a couple of coils to get closer to 500fps. They are only about ÂŁ14.
Agree with parcel force they are rubbish 5 weeks later and I'm still waiting for my gas blowback scar l. They are giving me the runaround when I try to contact them!!
Luke atkinson yeah I had a parcel from HK, their phone system told me it was leaving the uk, the customer services said it hadnât arrived in the UK, then it arrived the next day! They are the worst of all the postal services Iâve used around the world!
Saitek X52 there is some truth in this. However, you can still see a good set up even before it beds in. Itâs not like itâll rubbish for the first 500 and then epic. đ
Iâve never seen a bad gun suddenly becoming good after 500 rounds. All my build have been either good right after the first bbs or trash. The break in period is a concept actually based on nothing but assumption, and have never been proved by any objective data. But people will keep believing in it because they saw it on the internet
So will you be doing the Novritsch L-96?? I had an ASG (I think) L-96 and despite lots of money and fiddling, I just couldnt get it to shoot right, I sold it for buttons in the end, but patriotism makes me want a decent L-96. However, I hardly ever snipe so maybe an TM VSR-10 is the way to go??
Funny you should ask that. Iâve got a new L96 right here. I was going to do the SSG96, but I thought it would be more fun to try and make a better one for the price of an SSG. the VSR base is hard to beat but you still have to pay a fortune.
@@casinodelonge yeah, I did too, but then I started to wonder if it would be any different to my MK23 other than the barrel and cancelled my pre-order. Especially as they took the money but itâs not due until Feb. I actually ordered the PP2k instead.
Thanks for a great review very informative ...its looks a great peice of kit but it's expensive I would rather go for AN AS02 which you sat next to it and upgrade that....it is more unusual and looks pretty gnarly compared the VSR type rifle
Paul Narraway thank for the positive feedback đ the as02 is a fantastic gun, it does need upgrading straight out the box but once done is perfect. Bit loud though lol. Itâs also pretty light so you can carry it as a support sniper.
@@BIGBIRDSAIRSOFT That's the role I would be looking at it for ...just love the looks of it and have seen what looks like a Barrett 50 cal muzzle break for it ....physch out the oppositionđ€Ł I think a scout sniper role is probably the best of both worlds .Keep up the great work ..really enjoying all the tech stuff and info as I am a newbie to airsoft but have a good solid background in real steel
Are you still looking for a g and g l85a2 there is a afv one on gunfire 2nd hand ...just remember you saying on your latest video you couldn't source one
Paul Narraway yes mate but unfortunately I canât use the art as the barrel is too short. I really need the full size one. I did eye up using my afv. Thanks for the heads up though đ
Just a heads up, I'm in Canada and just received the SSP1 earlier this week. Sure enough shipping QC is not up to par. My pistol inside box looked like it went through a war without me.
As for the rifle itself, I figure brand new or a beginner sniper that is around $299.00 or so + 25yr warranty on a gun you don't need to upgrade. Seems like a good deal to me. But time will tell to see if it holds up, take a can of flat black paint on that barrel. I'm with you to much shine.
Me to picked up afew new guns over the winter with all the black Friday sales. Been upgrading my krytac spr, and vsr. Once it warms up start to paint everything for the season. Plus pickup a cqb carbine, perfect size and price for cqb gun, but also needs alittle upgrade. Getting ready for all the MILSIM over the summer. By the way new subscriber, liked how you did an honest opinion not jumping on the band wagon.
VSR is driving me mad, air leaks like crazy maybe why it was on sale...lol Am changing all internals, with higher quality. Right now I am under a joule .95, and FPS is only 298 was my best so big time fixing on that. Changing spring, cylinder, thinking about trigger assembly, changing, barrel, bucking/hop up changing everything.
alexis reyes the Silverback is probably one of the nicest out the box sniper rifle around. Iâve never used a standard one but upgraded they are amazing. Not a cheap option by any means though.
BIGBIRDSAIRSOFT - agree âŹ499 for A2 compared to a std SRS at c.ÂŁ550 (not upgraded) . Iâm just stuck as to which one but I love the look of the bull pup!
I donât have an Archwick to compare, but from what Iâve seen of it, the quality is far superior to the SSG. Obviously I canât verify anything as I donât own one.
Because you need a longer distance than 20m to zero a airsoft sniper rifle scope, as the flight path of the BB isnât flat. At the time, I didnât have the space available. Thatâs why!
Narinjas that and he made air break pins to make it even more quieter with the down side of reduced FPS. But you can always get a heavier spring to bring it back up.
dude you cant compare the Striker to the SSG 10. Everyone knows that the striker is cylinder undervolumed out of the box. Everyone also knows that the Striker requires a lot of work to get it working on par with a highly upgraded vsr10. I do like the ssg 10 A2, dont get me wrong. you just cant make those comparisons. And all that aside if anyone has bought a striker then chances are they have already upgraded it and not worth the $$ to go buy "another" sniper. I have a striker build that is completed, nothing else you can do to it. I go up against HPA's, Silverbacks and ssg 24's with it and it is on par in performance, yet it is simpler in design. I can strip down my striker in the field (and have) to fix minor malfunctions. It is one of the things I like about the striker. You would be hard pressed to do that with any other sniper.
Ghostwalker Airsoft Tech I agree the AS-01 has volume issues, but the shorter AS-02 is fine for 500fps. Mine is fully upgraded with everything done, and I believe itâs one of the best bases for a sensible priced sniper rifle and in some ways more solid than the SSG 10. However, as they have similar performance from what Iâve seen so far, and as you can build a simple but effective AS-02 for ÂŁ400 and the SSG-10 is ÂŁ414, I would say they are completely compatible. The SSG-10 is NOT a highly upgraded VSR either. It has a few choice mods that are well done to make maximum differences but there are some parts I donât rate, but that is for another video. As for being field strip-able, for me Iâve never found a need to. I love my AS-02, and Iâm not about to get rid of it itâs so good and Easier to carry too. Thanks for comment anyway itâs interesting to hear about other peopleâs builds. đ
@@BIGBIRDSAIRSOFT Mine is an As-01 that I converted to an AS-02. I previously ran an M700 or an L96. This thing is now my go to beast!! I took care of the volume issues by machining a heavy weight piston in a non-ported design. The results achieved are that this gun will do near 600 fps- although ive tuned it down quite a bit to get just at legal limits at my fields. but the result of the heavier non ported design allows for all of the air to be used more efficiently rather than blowing our the sides to inflate the oring and uses the momentum to push the piston forward harder and faster with a bigger spring. btw, I never said the ssg 10 was highly upgraded. The ssg 24 is just a modify 150, ssg 10 seems to be the maple leaf modular rifle in all its rights.
AS02 gang here I owned both the 01 and 02, as well as a VSR and T10 Under legal limits of 454 fps these two rifles are essentially the same in terms of performance, ie there is nothing an AS02 can't touch while the VSR can. The AS02 imo is more rugged and more compact, also more well designed than the VSR in structure
Marcus Hillerström yeah, they still work with FPS instead of joules. Not many sites recognise or test for joule creep. Most of our sites have a 350fps for full auto AEGâs, 420fps for single shot AEGâs (DMR) and 500fps for bolt action snipers.
@@BIGBIRDSAIRSOFT We had a group that did a recalculation of the joules you hit with with the new heavier BBs that are often used today. That showed that with some of the weights in certain classes you hit as hard as 1.5 joules at the minimum safety distance. It led to a new chrono table that more and more organizers start to use (in Sweden). It's really a interesting read www.2020tabellen.se/faq.html
Marcus Hillerström thatâs actually a really good collection of data. The issue in the UK is when we look at the velocity and weights of BBâs a lot of Airsoft guns could technically be banned due joule creep. IMO Itâs a bit of a mess to be honest. If you have a full auto Airsoft gun firing over 370fps it is classified as a section 5 firearm with a mandatory 5 year prison sentence, yet these are Imported from all over the world at 400+FPS. Most good Airsoft shops downgrade the springs, but not all of them. Fortunately most Airsofters are responsible and downgrade their guns but itâs a horrible grey area caused by poorly thought out legislation. Itâs actually easier for me to own my real shotguns than Airsoft guns đ
First off Chris Kyle is known as one of Americaâs greatest snipers. He was a US Navy Seal and his rifle of choice was the McMillan Tac .338 or .308. Youâre one of the only guys Iâve seen make reference to him and your in the UK so the fact that you recognize him is amazing and it means a lot for you to mention that. Secondly Iâve been considering picking one of these SSG-10s up and this video along with many others just helps confirm that this is a great first rifle. Probs to Nov!!
HoneyBadger thanks for the positive feedback đ
If all of your gun reviews are like this then you definitely deserve more attention from the Airsoft community. Great and in-depth info along with good camera work and a friendly manner about you
Nice review, one of the most informative and genuine feeling ones I've seen. I'm looking forward to hearing your thoughts after some game time.
iNko Airsoft Thanks mate, I try and keep all reviews genuine and factual.
@@BIGBIRDSAIRSOFT do you know how to hold the riffle I don't know how to can you tell me how to hold it
1.7m?đ€
It would be hilarious to show up on the field with a gun that long.
NameNotImportant lol yeah I meant 1070mm although I have a Well 4411b that feels about 2m long
BIGBIRDSAIRSOFT - and plus a suppressor?
Most professional airsoft review that I ever saw. I really appreciated it. You are great, man. Greetings from Italy
Really great thorough review - I like the look of the A2, but the A1 version is one I find really interesting. ÂŁ270 or âŹ299 (SSG10 A1/VSR10 clone)for a Novritsch rifle that's basically internally identical (near enough) to the other Nov rifles to me is ridiculously cheap - when you consider the cost of cheap clones and quality upgrades as you mentioned.
On a wider Novritsch point - I'm not even an airsoft sniper, but by releasing rifles of obvious quality at such a low price point(ÂŁ270) not only is he stepping on a lot of manufacturers' feet, he is making higher level airsoft sniping more accessible(for years airsoft sniping has been difficult - rifles being temperamental/expensive etc). If it works well then great, if not, it needs to be called out. Overall for us consumers/players, it's absolutely fantastic.
Going to watch the subsequent review next.
Great video, honestly the most informative review Iâve seen on this gun so far đđ»
Matt Hill thanks for the positive feedback đ
Wow, only 430 subs? This is great. I'd have expected a few thousand at least. Good luck going up dude
YT Games thanks for the positive comment, hope it keeps growing đ
yeah great job man, you deserve a lot
more recognition than you got from this. however, next time note the joules you bought.
pro trick: you can watch series on Flixzone. I've been using them for watching a lot of movies recently.
@Cohen Nixon Yup, I've been using Flixzone} for since november myself =)
Love your scope =) What brand/model is it. Also nice vids
Bjarke Hansen itâs a Rhino scope, pretty old though, I donât think you can get them anymore but you can have the same look if you fit a sun shade to many scopes that have a thread at the end. Just check the models. Thanks for the feed back đđ
I believe that when they receive the rifles from the manufacturer that they test them and then rebox them. My ssp1 came covered in oil.
Jon 199102 yeah they really missed with that one. Packaging wasnât the best either.
@@BIGBIRDSAIRSOFT yeah I didn't get my Nov stickers either ha. Tbh he claims to be such a small company I would expect better customer service throughout. I paid for there premium service on the sat. They didn't send it til the Wednesday. I feel this was because I said I would cancel the whole order otherwise
Jon 199102 yeah I didnât get any either, some people got patches too đ shows I donât get press packs though lol
@@hal752 every SSP1 comes over oiled. A lot of people from different countries buys them so they have to account to what happens during shipping overseas. Whether you buy a SSP1 or a SSG10, make sure you CLEAN your weapon first before using it.
@@saintjellies not all. I had a friend order one at the same time as mine. Although in the states. His came mostly dry. I presume it depends on who "tests" prior to shipping.
Just ordered mine today with the m220 spring
Great review thanks and I look forward to mine arriving I have sold my SRS for this!
picklepeg1 wow thatâs is some commitment to sell an SRS! Hope it works out as the right decision đ
BIGBIRDSAIRSOFT Yep to be honest the SRS was a great Rifle but so heavy just hope the SSG A2 has the same range!
picklepeg1 They are pretty chunky guns. fingers crossed đ€
@@picklepeg1 It definitely can. Make sure you clean your inner barrel first before using it. Also depending on the spring that you use, make sure to use the right ammo for it. If you got the orange tip at the end, remove that crap immediately or your shots will be wild. Or take off your orange tip, drill into it to make it wider and then put it back on.
did it come with orange tip
We donât need orange tips in the uk
Fantastic in-depth review, I plan on picking one up. Does anyone know if all VSR magazines fit or do I have to get the Novritsch ones?
You just gave the best airsoft gun review I've ever seen. Great review. You are the Rick Sheils of airsoft gun reviews. I have a amboea striker as01, and I've been thinking of adding the larger cylinder from ares. Do you know much about them? Are they any good or do the job they are supposed to? And lastly, do you know if there are any issues when it comes to installing them? Can you change the springs still with the one piece cylinders? Thanks
I have fully upgraded AS01. They are great when done, but do the full upgrade in one go. Cylinder, barrel, hop etc. The sears are okay to leave. You have to make sure the cylinder hop engagement is good though. Just be aware, itâs loud!
How many shots did you put through the hopup-bucking before the shooting test? The maple leafs usually needs a couple of hundred shots to really break in. Great review, cheers!
When other reviewers say it have a rubberised feel they are speaking about the A1, which is a JG BAR10 stock. And yes, thatâs rubberised, and in fact a bit shitty because of that.
SSX23 have issues that other mk23 variants doesnât. Including the STTI, made in the same factory. For example, the SSX23 lose quit a fair amount of energy when you fire the pistol with the hammer cocked, compared with the double action shooting operation. You have problems on leaks from the contact between mag gas router and noozle too. So, if you push the SSX23 mag up on the grip, it will get more energy on the shots.
BOWMAN, the Sniper I bight SSX23 And itâs been incredible solid. No issues. Itâs one of my best guns honestly
and you piad for the delivery service, is there spomething wrong here, ie a private courier. when royal mail does it better,
nmko
same happened to me with the ssg24.. broken case in transport. Novritsch put some foam to protect the case!
Parcel farce, god bless um, spare a thought for the driver it looks like you were drop 82 one day and missed you and drop 147? The next day, love the gerber- let's go for a tiny Swiss army knife next time and really lower the ante.
Love the vid, subscribed
Matt Mills I think that could be a legit theme, smaller knife for every video đ thanks for the positive feedback and sub đ
Love the review man I just wish I could get my hands on one of those there just so expensive
Warhammer066 more like dirt cheap for what you get i guess
@@DonMarco321 A Rolex is dirt cheap for what you get too, but it's $7000
How much is it
@@h.hudd1373 500⏠for the A2 and 300⏠for the A1
What weight bbs would you recommend for the ssg10? I have one on the way and ordered 0.43g bbs with it because I was worried 0.46g would put it over the 2.32J limit for UK sites
.43 are fine. Play with it, learn the limit of the gun, try .4, .45, .48 even .36 under different condition, maybe try different bucking, a tdc.... This is how your learn, throught trial and error
@@Uria-jz1gu I was mainly concerned I wouldnât be able to use the gun if I used too heavy of a bb weight. 0.43g puts me just under the limit and works perfectly so Iâm gonna stick with that đ
Good job. Just received mine and think its nice. If you clean the barrel and hop bucking bet you get a better grouping. Did you chrono with heavy BB's? I did and was getting 2.52j on 0.48bbs
churnsides4 youâre absolutely right about that, Iâm going to strip, clean and re-lube it this weekend. I was using 0.45 Geoffs BBâs, which were skimming around the 2.2j. Enjoy the rifle đđ and thanks for the feedback.
Does it come with the scope and the bipod??? Love this veid man!
Love the focus on details! nice job
6:35 my man, how did you get 1.7m while meashuring that rifle, the Barret .50 cal is 1.5mđ
Awesome Gun... But why the big scope if your only shooting at 100-200ft .. Is it for looks ?
Itâs a sun shade, the scope is only 4x to 24 like 90% of scopes.
nice video just one question what was the scope you used on it
Itâs a rhino scope but you canât get them anymore.
Remove the safety and re lube the cylinder with abbey silicone oil .... the cylinder falls into the position....smooth as fuck
What spring did you have with the gun the m 150 or m 160
150
where i can buy this scope?
All novritsch guns are manufactured by other airsoft Companies.
Upgrades are so hard to find and rifle is expensive with lots of pot metal internal.
others store products are cheap chinese rebrand that you can find at ali or ebay.
awesome personality dude!
great vid do you run a suppressor
What scope is that
hi big bird i was just wondering what youd choose from the ssg10 and the srs a2 as im looking to buy one
Kai Jackson SRS A2 for me. It is better made, great out the box and if you fit a hop and barrel, in a different league. Itâs also lighter, shorter and much nicer to use. You can make good use of the extra air volume with the heavy ammo.
BIGBIRDSAIRSOFT cheers mate appreciate the fast response do you know an estimate price to get it upto around 450-500 FPS?
Kai Jackson I put a 2j Rapax spring in and itâs at 470fps. You could also drop a 3j in and trim a couple of coils to get closer to 500fps. They are only about ÂŁ14.
BIGBIRDSAIRSOFT cheers mate appreciate it
Agree with parcel force they are rubbish 5 weeks later and I'm still waiting for my gas blowback scar l. They are giving me the runaround when I try to contact them!!
Luke atkinson yeah I had a parcel from HK, their phone system told me it was leaving the uk, the customer services said it hadnât arrived in the UK, then it arrived the next day! They are the worst of all the postal services Iâve used around the world!
What scope do you have attached to the ssg10?
Rhino scope but theyâre not available anymore
Love that hat, big up Hullâïž
The case cracking is very common. I looked at one other review and the exact same happened.
Willem van der Pol all for the same reason
Bolt catch ramming into case
people tell me you need to shoot 500 bb,s before the gun breaks in , is this true ?
Saitek X52 there is some truth in this. However, you can still see a good set up even before it beds in. Itâs not like itâll rubbish for the first 500 and then epic. đ
Iâve never seen a bad gun suddenly becoming good after 500 rounds. All my build have been either good right after the first bbs or trash. The break in period is a concept actually based on nothing but assumption, and have never been proved by any objective data. But people will keep believing in it because they saw it on the internet
Is it bar 10 upgrades needed for this?
Itâs an upgraded bar10. The barrel/hopup/bucking/nub can be improved but itâs supposed to be playable out of the box
Hey i wanted to know what spring were you using
Ghostreaper 1311 the standard one from Novritsch. Not sure what weight or brand it is.
So will you be doing the Novritsch L-96?? I had an ASG (I think) L-96 and despite lots of money and fiddling, I just couldnt get it to shoot right, I sold it for buttons in the end, but patriotism makes me want a decent L-96. However, I hardly ever snipe so maybe an TM VSR-10 is the way to go??
Funny you should ask that. Iâve got a new L96 right here. I was going to do the SSG96, but I thought it would be more fun to try and make a better one for the price of an SSG. the VSR base is hard to beat but you still have to pay a fortune.
@@BIGBIRDSAIRSOFT I Shall await developments then, mind you , I noticed that Mk23 rifle thing on his site and it looks interesting.....
@@casinodelonge yeah, I did too, but then I started to wonder if it would be any different to my MK23 other than the barrel and cancelled my pre-order. Especially as they took the money but itâs not due until Feb. I actually ordered the PP2k instead.
@@BIGBIRDSAIRSOFT same here, I wouldnât have minded paying 100 up front but 300 then wait til April?? I think not.
Amd please can you upload a range test at about 90+ metres
1.7m wha,what? is that thing as long as an anti tank rifle? đ
it looks like they have been using the box like a sheld in a airsoft game
What spring
Thanks for a great review very informative ...its looks a great peice of kit but it's expensive I would rather go for AN AS02 which you sat next to it and upgrade that....it is more unusual and looks pretty gnarly compared the VSR type rifle
Paul Narraway thank for the positive feedback đ the as02 is a fantastic gun, it does need upgrading straight out the box but once done is perfect. Bit loud though lol. Itâs also pretty light so you can carry it as a support sniper.
@@BIGBIRDSAIRSOFT That's the role I would be looking at it for ...just love the looks of it and have seen what looks like a Barrett 50 cal muzzle break for it ....physch out the oppositionđ€Ł I think a scout sniper role is probably the best of both worlds .Keep up the great work ..really enjoying all the tech stuff and info as I am a newbie to airsoft but have a good solid background in real steel
Are you still looking for a g and g l85a2 there is a afv one on gunfire 2nd hand ...just remember you saying on your latest video you couldn't source one
Paul Narraway yes mate but unfortunately I canât use the art as the barrel is too short. I really need the full size one. I did eye up using my afv. Thanks for the heads up though đ
@@BIGBIRDSAIRSOFT you are welcome thought it was worth a shot as such
I always wondered how much less this thing would cost if the barrel weren't fluted. That's just a dressy dress-up thing in airsoft.
Just a heads up, I'm in Canada and just received the SSP1 earlier this week. Sure enough shipping QC is not up to par. My pistol inside box looked like it went through a war without me.
Uncle Dee yeah that sucks, shame itâs let down by shipping.
As for the rifle itself, I figure brand new or a beginner sniper that is around $299.00 or so + 25yr warranty on a gun you don't need to upgrade. Seems like a good deal to me. But time will tell to see if it holds up, take a can of flat black paint on that barrel. I'm with you to much shine.
Uncle Dee yeah Iâm planning a Camo paint job, just waiting for the weather to clear lol
Me to picked up afew new guns over the winter with all the black Friday sales. Been upgrading my krytac spr, and vsr. Once it warms up start to paint everything for the season. Plus pickup a cqb carbine, perfect size and price for cqb gun, but also needs alittle upgrade. Getting ready for all the MILSIM over the summer. By the way new subscriber, liked how you did an honest opinion not jumping on the band wagon.
VSR is driving me mad, air leaks like crazy maybe why it was on sale...lol
Am changing all internals, with higher quality. Right now I am under a joule .95, and FPS is only 298 was my best so big time fixing on that. Changing spring, cylinder, thinking about trigger assembly, changing, barrel, bucking/hop up changing everything.
This A2 stock is very identical to the Maple leaf vsr-10 stock.
Akisen Matsumura it is a Maple Leaf stock
Itâs because it is the maple leaf vsr stock. Nov even said it himself
Nice review. Please configure your white balance on the camera to be fixed :D
If you have to chose one srv or ssg10 ? What you chose?
alexis reyes SSG 10. I think the vsr is great once upgraded, but itâs an expensive process. The SSG 10 is already a long way there.
And de silverback srs a1? Eny idea?
alexis reyes the Silverback is probably one of the nicest out the box sniper rifle around. Iâve never used a standard one but upgraded they are amazing. Not a cheap option by any means though.
@ja nee but this is 500... so
BIGBIRDSAIRSOFT - agree âŹ499 for A2 compared to a std SRS at c.ÂŁ550 (not upgraded) .
Iâm just stuck as to which one but I love the look of the bull pup!
What is your scope???
ThePiltrafiya itâs a 4x16 Rhino scope, but I donât think you can get them anymore.
Did the rifle come with a scope or did you have to buy it separate
No, and you canât get that scope anymore
this or the ARCHWICK MK13 Compact Spring Powered Sniper Rifle
I donât have an Archwick to compare, but from what Iâve seen of it, the quality is far superior to the SSG. Obviously I canât verify anything as I donât own one.
Any import charges when buying it?
Its from Austria so i dont think so
Paul Vapes no, there are no import charges, yet lol. That would make it unviable.
@@bjarkehansen4911 from Austria to Canada is 197$ import charge
Instead of telling us that the scope wasn't zeroed, why didn't you zero the scope, then shoot a target?
Because you need a longer distance than 20m to zero a airsoft sniper rifle scope, as the flight path of the BB isnât flat. At the time, I didnât have the space available. Thatâs why!
1.7 meters?
What scope is this?
Greg Kopanczyk itâs a Rhino 4x16 with a sun shade fitted. I donât think you can get them anymore.
@@BIGBIRDSAIRSOFT Its a beast, I can shoot a 2 inch group with my .22 at 100 metres with something far less fearsome!!
Reviewers uses the most awkward knifes to open boxes. Box cutters exist for a reason folks.
why is your left ear so red?
Chris Kyle was a NAVY SEAL, not a marine
A range test would've been nice, eh?
Probably
Anyone else hear that spring after each shot?
No BB's inside ... when it shoots BB's it is quieter. (i would wander with a silencer how will it sound.
Narinjas that and he made air break pins to make it even more quieter with the down side of reduced FPS. But you can always get a heavier spring to bring it back up.
Then is one yes or not?
john felipe urrego mejia yes itâs worth it. Just do some maintenance before using it.
@@BIGBIRDSAIRSOFT when can buy it, month pls?
john felipe urrego mejia right now.
eu.novritsch.com/product/novritsch-ssg10-airsoft-sniper-rifle/
@@BIGBIRDSAIRSOFT better A1 or A2, I already have ssg24 then my choose will be different body
john felipe urrego mejia I prefer the A2 as it is a bit heavier but I really like the maple leaf stock.
Damn unboxings... Can take quite a long...
every single box cracked wtf
I guess for some people (the younger audience) 10 pounds is a little too much.
dude you cant compare the Striker to the SSG 10. Everyone knows that the striker is cylinder undervolumed out of the box. Everyone also knows that the Striker requires a lot of work to get it working on par with a highly upgraded vsr10. I do like the ssg 10 A2, dont get me wrong. you just cant make those comparisons. And all that aside if anyone has bought a striker then chances are they have already upgraded it and not worth the $$ to go buy "another" sniper. I have a striker build that is completed, nothing else you can do to it. I go up against HPA's, Silverbacks and ssg 24's with it and it is on par in performance, yet it is simpler in design. I can strip down my striker in the field (and have) to fix minor malfunctions. It is one of the things I like about the striker. You would be hard pressed to do that with any other sniper.
Ghostwalker Airsoft Tech I agree the AS-01 has volume issues, but the shorter AS-02 is fine for 500fps. Mine is fully upgraded with everything done, and I believe itâs one of the best bases for a sensible priced sniper rifle and in some ways more solid than the SSG 10. However, as they have similar performance from what Iâve seen so far, and as you can build a simple but effective AS-02 for ÂŁ400 and the SSG-10 is ÂŁ414, I would say they are completely compatible. The SSG-10 is NOT a highly upgraded VSR either. It has a few choice mods that are well done to make maximum differences but there are some parts I donât rate, but that is for another video.
As for being field strip-able, for me Iâve never found a need to.
I love my AS-02, and Iâm not about to get rid of it itâs so good and Easier to carry too. Thanks for comment anyway itâs interesting to hear about other peopleâs builds. đ
@@BIGBIRDSAIRSOFT Mine is an As-01 that I converted to an AS-02. I previously ran an M700 or an L96. This thing is now my go to beast!! I took care of the volume issues by machining a heavy weight piston in a non-ported design. The results achieved are that this gun will do near 600 fps- although ive tuned it down quite a bit to get just at legal limits at my fields. but the result of the heavier non ported design allows for all of the air to be used more efficiently rather than blowing our the sides to inflate the oring and uses the momentum to push the piston forward harder and faster with a bigger spring.
btw, I never said the ssg 10 was highly upgraded. The ssg 24 is just a modify 150, ssg 10 seems to be the maple leaf modular rifle in all its rights.
AS02 gang here
I owned both the 01 and 02, as well as a VSR and T10
Under legal limits of 454 fps these two rifles are essentially the same in terms of performance, ie there is nothing an AS02 can't touch while the VSR can.
The AS02 imo is more rugged and more compact, also more well designed than the VSR in structure
Are you Steve the pirate
Typical of Royal Mail
Can I have it đ
That scope is very large
Penis Monkey indeed it is đ
No hate, but that has to be the shakiest/worst camera work ive ever seen...
Sorry too glossy and cheap looking
Mark Greenway I know exactly what you mean, it really needs a paint job.
What spring is installed and with what g of BB did you chrono?
Matija Kozina it came as the 2.2j model but I donât know what spring is in it. I would say m150 at a guess. Always cronoâd with 0.2g BBâs.
@@BIGBIRDSAIRSOFT Is that standard in GB? In Sweden we normally chrono with the weight we play with to not get joule creep
Marcus Hillerström yeah, they still work with FPS instead of joules. Not many sites recognise or test for joule creep. Most of our sites have a 350fps for full auto AEGâs, 420fps for single shot AEGâs (DMR) and 500fps for bolt action snipers.
@@BIGBIRDSAIRSOFT We had a group that did a recalculation of the joules you hit with with the new heavier BBs that are often used today. That showed that with some of the weights in certain classes you hit as hard as 1.5 joules at the minimum safety distance. It led to a new chrono table that more and more organizers start to use (in Sweden). It's really a interesting read
www.2020tabellen.se/faq.html
Marcus Hillerström thatâs actually a really good collection of data. The issue in the UK is when we look at the velocity and weights of BBâs a lot of Airsoft guns could technically be banned due joule creep. IMO Itâs a bit of a mess to be honest. If you have a full auto Airsoft gun firing over 370fps it is classified as a section 5 firearm with a mandatory 5 year prison sentence, yet these are Imported from all over the world at 400+FPS. Most good Airsoft shops downgrade the springs, but not all of them. Fortunately most Airsofters are responsible and downgrade their guns but itâs a horrible grey area caused by poorly thought out legislation. Itâs actually easier for me to own my real shotguns than Airsoft guns đ