HOW The MJX HyperGo SHOULD HAVE Been Built
Vložit
- čas přidán 5. 04. 2024
- 🏆WIN an RC Car: raffall.com/derbycityrc
✅ CAR USED:
HyperGo H14BM RC Car: amzn.to/3PSVFhY
or HyperGo 14210: www.banggood.com/custlink/vvD...
or HyperGo 14209: www.banggood.com/custlink/3KD...
✅ PARTS USED:
-Shocks: amzn.to/4ams88F
-Wheels (two sets): amzn.to/4cOou8U
-Front control arm set: www.banggood.com/custlink/mK3...
-Steering tie rods (not shown in pixture of listing): haiboxing-hobby.com/products/...
-Rear control arm set: www.banggood.com/custlink/3v3...
-Control arm hinge pins: haiboxing-hobby.com/products/...
-Hubs: amzn.to/3xAC5R2
-Front Axles: amzn.to/49q8ib6
-Rear Axles: amzn.to/3J5wWDc
-Differentials: amzn.to/3THxRP8
-Upgraded Servo: www.banggood.com/custlink/G3K...
-Wheelie bar: amzn.to/3TQCir1
✅ VIDEOS:
-HyperGo Review: • MJX HyperGo 14210 - We...
-HBX Build Part 1: • Making the BEST RC car...
-HBX Build Part 2: • I Built THE BEST 1/14 ...
-Favorite RC Car under $200: amzn.to/3MX09Ta
-Car review video to support my opinion about said car: • New HBX 2997a - The RC...
-Favorite RC car under $500: bit.ly/derbycityrc
Video to support my opinion: • Arrma Outcast 4S NEW V...
-My most fun speed project so far: • Brushless Upgrade - Ma...
👕Shirts & Stuff: https: //dertymerch.creator-spring.com
-Adjustable Ramp: www.kc-rc.com/collections/bas...
-Ramp Build Tutorial: • How to BUILD RC CAR RA...
🔋Favorite Lipo Charger: www.banggood.com/custlink/m3K...
🛠️Awesome Hand Tools: naughtyboyrc.com/derbycity
💰Discount code: derbycity5
-TikTok: www.tiktok.com/@derby.city.rc... - Zábava
The truck really handled better. I am surprised the chassis survived without any bends. I don't think there is another CZcamsr that runs these hard. Keep up the good work.
It definitely did! Thanks man!!
Those videos are so well-made. This is Kev's video quality (who has 2m+ subs, obviously). You deserve much more bro. I'd love to see You and Kev collab for some bashing.
Better than kev ! Just saying ….
@@rcexpatshkyeah cause kev always skips the important parts I want to see cause “their boring”
Agreed. He makes realy good and Not boring Videos.
Way better than kevs
Thanks bro! Subs are climbing thanks to all of you guys! He lives a bit far from me but ya never know!
Another great video Brother. I absolutely love how you get the kids involved. They look like they’re having a great time. Looks like the Raffall is doing great. I bought some tickets for the hbx. I figured if I got lucky and win, it would be a great way to get other local kids into the hobby.
Single dad life or I would just buy another car for them. I could use that car for any of the kids to try out and have fun with you know. I know it’s a longshot but either way that’s what gave me the idea. How are you always have the kids and other people involved in the videos. Figured it would be pretty cool to have a car for other kids to fall in love with the best hobby in the world you know. Thanks for the great videos. I know it’s been a little while since I’ve commented life’s been pretty crazy but me and my little girl still watch all the videos.
Hey man that’s awesome, thanks!
Good luck on that Raffall, it ends in about 22 hrs! Its done well enough that I’m going to move forward with more of them 👍
Definitely appreciate you guys watching the videos and we’re always open to comments!
RC is the best hobby and so glad I can share it with so many people!
I completely agree. That’s what’s best about this. Hobby is sharing it with other people. There is nothing better than seeing the smile on a kids face the first time they pick up a transmitter and go crazy with a car.
Sweet build dude!! Very big-brain concepts, well done and beauty instructions 🙌🔥
Thanks bro! Watch MJX make one now 🤣 🤘🤘
Yep.. this is one of the other guys I watch lmao..
Sup crazy B. 🤣
(When he does crawler vids ,, they're pretty fun to watch 😉 )
I used front/back lower/top arms from a haiboxing 903A scale monster truggy and had an extra pair of the mix extending cvd for both front and rear and had to do zero cutting. Everything lined up and was able to use some metal 80mm oil filled shocks from amazon that I had never used. I’m having zero heat issues and even running some 100mm buggy tires with metal wheels and 12mm metal hubs. My mjx 14210 is now 30mm wider and so much more fun to bash
Sounds amazing, so I should be able to just buy the 903A parts and fit them on the 14210?
Btw what’s the difference between the 903a and the 9772a?
Nice! Ya the 903 component should fit as well, so that’s awesome!!
Well I can confirm the parts from the 903a doesn’t fit on the 16410, I striped mine today and tried to fit the suspension arms, but there is some cutting and shaving required and unfortunately it seems I’m also missing some parts so this will have to wait 🤦🏻♂️
Dang! Ya I figured there may be cutting/shaving involved as I had to do it when I put the 903 parts on my 16889a. Very similar setup to the 1/16 hypergos. Still worth it though!
Great build Evan, having a wider track chassis certainly made it handle better, and the use of the HBX plastics was a good choice since both models parts are compatible with another. Have a good weekend brother 👍
Nice meld of the 2 RCs!!! That worked great!! You never know where this hobby will take you with ingenuity😁
Thanks Brad! Very true, the possibilities are vast!!
Awesome build video! MJX owes you big.... I hope they take note for their future trucks.
Thanks Brian!!
I hope so too, would love to see some improvements from them!!
I owned a 14302 , they have basically the same chassis base and drivetrain, only difference are cvd leght and arms. I own now a hbx and, compared to it, the real difference is the less powerful motor and lighter chassis that helps the car survive far more. Also the plasic are super flexible, the schrews are better set and the car is overall easier to deassemble. The semplicity , less power and weight of the hbx helps a lot!
Yes I agree!!
Is there a doner car that has all these parts on it as getting each part is quite expensive, I've got a hyper go 16208 I'm going to fit it to.
@johnholloway5141 ya it got a little more than I thought but I actually haven’t even added it up yet. Have you?
The cheapest sober at the moment would be this: www.banggood.com/custlink/KGGHlD9uyw
Currently on sale.
There’s also the 2995 currently at $112 on Amazon. Still have to get the metal tie rods though.
Still not cheap to upgrade another car but if you really like your HyperGo, it’s worth it lol
You could also just get the 2997a for $165 lol
amzn.to/4awzBSl
Experimental, entertaining and in-depth!
That’s what I was shooting for!
Thanks man!!
Great mods definitely made it better cheers man 👍🏻
Thanks dude!!
Wow man, what a success! That is a real bad ass build… great truck! I think I’ll build one. Seriously, I’ll build it to compete with my terminator on the fun track… that’ll be a blast, one of my buddy’s can drive whichever one and I’ll take the other… race all day with the control those two cars have… yeah, I’m on that. Thanks. Killer video too!
Very nicely done Evan! I really like what you did here. You definitely improved its stance an durability over the original starting point. Hbx plastics are hard to beat and they allow flex to happen. Man you have so many parts available to you. Got stock in these companies? I know, you gotta have them if your gonna beat them as hard as you do.😝 pretty darn awesome Frankenstein if I do say so myself. G th he two companies should exchange Ideas and build a Traxxas demolisher in true 1/10 scale and they could hire you to lead the front. Sounds like an idea to me!
Thanks Robby!!
Yes I’ve accumulated a few parts the last few years 😊
Yup HBx is still one of the top budget brands and them uniting with HBX would be sweet!! Supposedly our first 1/10 from mjx is coming. Hope they did it right!!
Awesome Build 🔥🔥🔥💪🏿
Thanks!!
Thank you sir, i just love this mechanic type of video you re smart 😂. Just curious, its you that does the editing and all that jazz?
Thanks! I love videos like this too!
Yes I do all the editing 😃
You make the best videos period!!!❤️🔥👊
Thanks so much!!! ✊
🤩Awesome! Another amazing build and perfectly executed!💯👍 Best content ever dude you deserve way more subs!🤟
Thanks bro man!! They’re building every day! Much appreciated 😃😃🔥🔥
Another great video man and a really cool build. Hands down my favorite CZcamsr and a big reason I now own like 8 rcs lol. You deserve so many more subs. Really cool stuff 🤙👍
Thanks a ton as always Richie! Sorry for the late response, always love your comments!! 😃 🤜💥🤛
Love mjx hyper go. I've got a 14301. I've been finding some fascinating hypergo modding yt channels, but I've not seen this idea, I'd love to try it
This would be sweet on the 14301 too, but th shock towers are smaller so it may turn out differently. Just would need different shocks or the 14210 shock towers or some other modification. It can definitely be done!!
Thank you so much for the things in the link and you help me fix it
You’re welcome man!
another great video brother
Thanks man!
What an awesome build bro, looks so cool now with that wide stance, certainly handles way better than out the box, quality video and content keep it coming 👌
Thanks so much man!!
Honestly I love your vids ❤❤❤
Have the same problem with the bezgar hp161s 1/16 scale the truck screams it's just way too narrow. That turned out awesome man great job
I agree, that bezgar is based off the hypergo so you can do this to that one too 👍. Thanks!
Good entertainment as always, dude! Looks like a great improvement, I do like those HBX plastics a lot!
Thanks bro!! 😉😃
This is some next level frankenmods! 😂Super impressed. Ironic that the “cure” came from the 2997a.
Thanks! You can call me Dr. Derbenstein!
So far all the budget brand “cures” come from an HBX 🤣
@@DerbyCityRC Hey, real stupid question. I went to open up my rear shocks on the 2997a today to put in heavier oil and was stumped by the mount not being attached to the cap. How do you get these things open without destroying them?
What I do is put needle nose pliers on the body of the shock (between the spring and below the threads) and hold that tight and unscrew the cap by hand 😃
@@DerbyCityRC Thank you! I got a bit antsy with it. Prob over-complicating/worrying.
@gothbricks2000 no problem! It happens! 😃
Best one yet bro!! That thing is filthy!!
Thanks!! 😃
Wow,quite a project...what grease/oil do you use in gears? How much you add? Thanks for sharing
Thanks!
I didn’t add anything to the diffs. Probably should have, but in unsealed diffs like these, I tend to use red & tacky grease. amzn.to/3wFh8o9
I have to know, man are you some kind of engineer or machinist full-time you make this look so easy. Very impressed man. You've got skills.
lol well my mom WANTED me to be an engineer. Does that count? 😆
But from tinkering with VCRs and other electronics as a kid and being an auto technician full time for about 10 (not anymore though), I’ve just had a lot of practice I guess lol Thanks!!
Nice one! You could use the wheelie bar from a 16207. These are longer and fir more or less directly to the original wheeliebar mounting point. Worked a treat for me!
Cool man, thanks! I’ll find one!
By the way, your channel is awesome! It's my go to for reviews and tips
Super glad you like it man!! Glad I can help! 😊
Awesome video 👍 you've solved the biggest problem on this model that people have been trying solve since it came out.
Exactly what I was going for. Thanks!!😊
Awesome vid bro, intriguing, but I've been good w my 15mm extenders, haven't really had an issue & the performance def improved on keeping her planted... But this is something worth doing if I ever encounter an issue🤘🏼
Thanks! Yup hex extenders certainly do the job!!
Another very fantastic job on this "Frankenstein" build you really know these cars like the back of your hand MJX or any other of these companies should hire you on the spot👍😁👍😁👍
Thanks 😃
Question ...im converting one these 16101's to brushless ,so new motor ,esc ,receiver...how can i bind the stock radio to the receiver ..the radio that came with truck doesnt have a bind button that i can find???thx ..love your videos
You can’t I don’t think. A new transmitter would come with a new receiver, or you need a transmitter designed to bind to the receiver you get.
AWESOME video! Just bought one of these for my kid’s first communion coming up in a few weeks. We’ll see how it goes and do this exact build if he can’t keep it right side up. However, I think I’ll be keeping it on 2S for him for a little while. Can you throw a servo upgrade link in somewhere? ✌️
Thanks bro!!
Yup definitely start on 2s. It’s an absolute monster on 3s!!
Yup finally added the servo link, but here it is!!⬇️
-Upgraded Servo: www.banggood.com/custlink/G3KtfKypgN
@@DerbyCityRCGot one. Thanks man!
@@DerbyCityRC Servo is on the way 👊🏼💥
Do you have any recommendations for tires that aren’t as grippy as the stock ones? I don’t have the time to do that full upgrade right now. The car flips over A LOT on the grass…he’s patient with it and gotten better but I want to him to try something else on there.
Seriously, sometimes you just have to add parts because they look sick! No arguments here! Nice video man.
Your vids are kickass
Thanks man!
Agreed u made it better than out of the box wow
Thanks!
Awesome build. The idea, the build and of course the result is absolutely awesome. I have one of these coming. I can't buy the wheels here in Germany. Do you have a recommendation for an alternative?
Thanks man... 👍🏻
Sorry for the late reply. How you like the car?
I haven’t tested any others but I’d say most tires with around 100mm diameter would work
I think that’s about the size tire I used. Cant remember what they measured for sure.
Great MoD!!!
Thanks!
Great build mate 😊
Thanks!!
Another awesome. Viedo. Man you have fun. I am just an old man who needed a hobby and found one. Man gotta upgrade my thunder To steel. Always breaking. Got gps meter today I got 37.1 mph. Out it. I put a 3 s battery and see if I can get more speed. Love your channel. My motto. Run. Break repair Repeat
Thanks! Oldness is just a number 😆
That’s good speed! Yup we break them all the time! Fix and repeat!
Im new to the hobby and bought one of these, any recommendations for quality replacement screws?
I haven’t looked into it yet. Might be worth searching the mjx facebook groups as I feel like I’ve seen it brought up there before.
Some would say you "wallered" the servo holes out! You should raffle off some of your Frankenstein builds!
Yup she dun gert wallered! I have a Granite Frankenstein build coming that I will likely raffle 👍👍
Cool build...
I come from a build it (from scratch) background so i love seeing someone doing stuff like this. Huge 👍.
Hey , I've got a question.. any recommendations for a servo upgrade for the 4s Mojave? ( Mines weak as , , already upgraded the springs... In the middle of repairing the body lol) aside from that, the thing just blasts, smooths out all the bumps.. 🤦 smh Now I gotta find BIGGER bumps lol.
Oh yeah,, need to bump up the brake settings to.
Thanks! I’ve got. Mechanical background so I also like stuff like this.
I have yet to upgrade my Mojave servo, but guaranteed there are options. See if you can get measurements of the servo and search for a new one by a good brand that way.
It might be weak servo saver for 4s. Look vids about 4s servo saver upgrade. Also standard size servo from cheap ds servo 25-35kg to agf servos will fit easily
@@skiftcha
hey, thanks 👍
Bro u killed it awesome video
Thanks!!
Nice upgrades 🔥👍🏽💯💪🏽
Thanks!
Can make a video on your top car recommendations, car part upgrades you recommend? Whats worth it or not
I’m actually about to do another one of those videos. I do have a couple but they’re somewhat outdated. Still relevant, but there’s newer good options!
Hi all. I am using a Dumbo RC transmitter and feel like I am driving a different car.
So I recommend it.
Thank you for the video.
My plan is to move the servo to the left side, then I may be able to fit a bigger size battery on the right side of the chassis. 😉
Agreed, the stock radio and ESC really hold the car back. Swapping the radio out for something a bit more lively and the esc out for a hobby wing 60amp or similar really wakes these things up off the line and in general response!
Yup! It made a massive difference on the other project I showed. Would likely make a world of difference for this one too!
Awsome build, definately going to want to do this to my 14210❤ the only issue now is finding the parts to ship to the netherlands 😅
Thanks! Well hopefully you can find them!
Does Haiboxing-hobby.com ship to you?
Sweet, they seem to do!❤ thank you for the comment and the heads up! Keep up the good work, really love your vids, and so does my 5yo son😎
Great video and way to make the Flipmonster manageable. That being said is the converted hypergo better/more fun than a stock 2997a? I’m trying to decide if it’s worth throwing another $100+ bucks at her. Thanks.
Thanks!
I’d say going for the 2997a is better, but honestly still a good choice as the HyperGo has a lot going for it. I actually haven’t even added up what this conversion costs yet lol.
The 2997a is a 1/12 scale so it’s a decent bit bigger. Maybe get the 2997a and as time goes on and you order spares for it, you could use some extra spares and convert the HyperGo over time. But besides a couple common areas (chassis on hard hits and occasionally the servo saver arm), the 2997a doesn’t break much.
I'm curious about the '3s mode.' Is it necessary to use a 3s LiPo battery?
See you man I wish I had your talent to modify this RC car. But I don't. without modification. Do you still think it is a good budget RC car I've got the 1/16 scale and love it. What do you think is the 1/14 OK out of the box or is it trash?
It’s definitely not trash. It’s a really great truck actually, it just tumbles easily because of the speed. You could always turn it down if needed. I like it more than the 1/16 hypergos,
Have you seen my recent video on the best cars under $150?
That might be worth your time.
Could I use those tires on stock axles. Also are they 12mm hex
Yes they should fit just fine (though I haven’t tried there’s no reason they shouldn’t). They are 12mm.
The only thing is there could be body rub when turning since the tires are bigger and those stock arms don’t stick out very far.
These cars haven’t much relation to the video except I’ve been analyzing these smaller scales waiting on the cf rlaarlo Omni terminator . I almost got this pup but already had a 16980sa from your reccomndation so got another . I like that the hyper go h14bm has a steel plate on the bottom of the chassis . In other vids I seen it s too fast for 3s on concrete and hard to control . I can control my 16980sa with 3s but I had to adjust the steering to snap back into center . One screw was a little too tight but it’s all good . I have to say HBX was sympathetic to me having t boned a stop sign and breaking the chassis allowing me to send it back to Amazon so I got another one for family members since the sale was around $115. Tried the paddle tires and they’re actually decent on all surfaces . I swear this thing goes around 50 mph or very close with a zeee 3s 2200 50 c( what does the 50c mean ? ) thanks . Having a lot of fun and appreciate the vids . I would seriously reccomend going to a church parking lot with a 3 s battery . I’m having a hard time watching speed runs down a street because it seems people don’t understand roads are pitched toward the curbs for water runoff . So , when a car is drifting towards a curb and operator tries to compensate and goes over the middle of the road the car will drift opposite of compensation toward the curb . Maybe some noob like myself will read this and not make the mistake I did and t bone a stop sign 😂. Big thanks to HBX for allowing a replacement , the wing . They said 3s batteries for 16980sa size will available near the end of April 👍. They ll probably send you a couple for sure . My last car was in 2000 or so , a traxxas t max that’s still in the attic . I m going to dig it out and see what she needs . These cars have come along way imho and I will absolutely be getting into an updated traxxas . I just don’t know which one yet but I won’t spend $1500 , maybe $5-$800 . I want to get one good one I know will be supported for upcoming years but these Chinese ones are a lot of fun right now . Sorry about the long comment . I also thought that one UK dude with the dark hair says rlaarlo the best , lol 😝 😂
Haha! Just saw this comment. How’s the TMaxx? The 50c is the discharge rating, how quickly the battery can send out a burst of current. Can still assist with higher speed too. Ya that road crown can be a b@&(@. I’ve been trying to do most of my speed runs in the school parking lot lol I’ve got a few good smacks in a video coming up lol
Nice video. Only thing missing in the parts list is the servo. Does it also fit in the Omni Terminator?
Thanks I got it added!
No the Omni has a bigger servo and is probably stronger. The Omni has one of the best RTR servos for its size!
@@DerbyCityRC thank you for the feedback. I will get my Omni soon and see for myself.
Hyper Go 2997A
Another awesome build!!
Pretty much!!
Thanks dude!!
Would it have been easier just to swapped the motor and esc from the 1 to the other vs this method?
Still a different car. Thing is a lot of people already own the HyperGo. If you’re still shopping for which one to get, the 2997a is a better car imo, but this car sold like hotcakes so lots of people have them already.
Did you have a link to the hinge pins too? Or do they come with the control arms?
This looks like a good fun mod to do with my youngster!
They come with the arms! They sell them separately too though.
Ya man it’s a great hands on project for the kiddos!!
So I might have been wrong about the hinge pins. I thought I remember seeing them but they’re not in the picture so here’s the hinge pin links. It comes with the uppers too so they can be extras.
haiboxing-hobby.com/products/haiboxing-1-12th-scale-rc-car-spare-parts-upper-suspension-arm-hinge-bolts-4p-and-lower-suspension-arm-hinge-pins-4p-apply-to-2995-t2022-and-t2024?_pos=1&_sid=6c6d3a4eb&_ss=r
Great video quality stuff appreciate the effort you put!
I recently got into the RC hobby currently got a 16210.
I ordered an aluminum kit but that honestly made it kind of worse.
Generally looking to make it more stable and roll over less, and it seems like the stock shocks are really bad, any advice on that ?
P.s I kind of tried to sum up everything required considering what I already have and it almost seems like it would be easier to just get the hbx one instead, what you think?
The HBX link you have doesn’t ship to Israel, any alternative?
I wasn’t a huge fan of the 16210. I liked it at first but like you said it gets really unstable. Same with the stock version of this 14210 on the video here. These upgrades made it so much better, but ya probably worth just buying the hbx. Also, you’re correct, that model only ships to the US at the moment. But here is a similar alternative, however it is only 2s capable. You can make it 3s capable by simply putting in a better ESC.
Check out this video and the link to it is in the description.
czcams.com/video/jY9cKuMFqY8/video.htmlsi=pEFbKF5G1TSrkfOk
@@DerbyCityRC thanks!
Ok I have a friend who can ship the 2997a to me, so that’s done.
Any things you would recommend a beginner should have upgrades or utility wise (suspension fluids , wheels etc..) while I’m on it 😅 ?
@jekae61 cool!!
I haven’t done any upgrades to mine yet so I don’t know lol. It really is good the way it is but I definitely have plans for it eventually 😆
I actually cancelled that and ordered the carbon ralaarlo 🤦🏻♂️
@jekae61 🤣🤣
Hey man to me that’s an even better car so I don’t blame you lol
Did you see my comparison video I guess?
Cool to see it was possible
I agree, thanks!
Dude I just got mine finished and it's a.azing lol. Thanks for the advice big dog!!!!
You’re welcome dude! Glad you like it!
Thanks for taking part in the raffalls, by the way! 😃 Good luck on this next one!
(The 1/10 MJX will be a Raffall soon, just need to get them in first!)
That thing looks sweet with a wide stance to it. Is the other raffle over?
Thanks I agree!
The other raffle has like 5 days left 👍
Cool mod!
It would be nice to have this be available as a upgrade kit.
But I personallt don´t think this is how they should ship it.
Yes it rides better this way than how they ship it but it also changes the vibe of the whole car.
I´m looking to buy the 14301 because I love how it looks but that seems to be even more narrow so I might work on making something like this for it so I can change between cool looking and higher performance
Thanks! The 14301 doesn’t flip as bad since it’s got slicker tires and made to drift. I have the 14303 I just reviewed which is pretty much exactly the same as the 14301 (which I reviewed about a year ago). I’ll have a video out in a couple weeks on a widening mod for it too so I got you! 😆
😮 man this is a Frankenstein!😱
please try Omni Terminator shocks on HBX 2996a!❤🙏🏻
Yup!! I definitely will be trying those on the hbx soon.
Thanks!!
hi bro I have a RC Car of MJX Hyper Go 16209 1/16 scale now I can run the highest C rating battery in this car with 3S battery or there will be no problem if I run it. pls bro tell me.
The C rating shouldn’t affect much to my knowledge, just keep it reasonable.
Should of been some type of thick foam in between the esc and chassis and as far as under the motor so impact wouldn’t do too much damage to both esc and motor
Yup I agree. I almost did it for this build too, but ultimately decided I still wanted to screw it to the chassis like it was originally. I should have foamed it anyway lol
Love the build. Excellent video. Have you got a link for the servo? I'm thinking of trying something similar on my 16210, really appreciate the ideas!
Thanks!
Yup thanks for the reminder. Just added!
Upgraded Servo: www.banggood.com/custlink/G3KtfKypgN
You've probably noted it in the video, but are you using the hbx knuckles both front and rear? If so, have you a reliable link for those, too? Thanks
Yes I used front and rear and I do have that link in the description. It’s a set with all 4 knuckles. However! It does look like the hypergo knuckles would work. I haven’t tested it because the hbx ones are still stronger, but visually it looks like they would. Front and rear. Then you could use the stock tires if you wanted also.
Oops my bad! You did indeed. Thanks. From what I know, the hbx stuff is way stronger, I couldn't agree more.
@daveeltringham8695 No problem! Yup for sure!!
Is this what you’re doing on your 16210?
you are legend,hy from Croatia
Hello friend I often look at you from Italy Rome thanks for your videos. Please tell me that wheels are those on the black Hyper Go 14210 seem excellent the original ones do not last long. Hello and thanks.
My RC Auto 14210 when it was new had no vibrations after a short time could not be guided I changed almost all the screws and with complete thread there was an incredible change. Hello Amicone
Hello!!
They are these wheels. I’m not sure if these will be available outside the US unfortunately. amzn.to/44tACZr
@@DerbyCityRC mille grazie Amico mio
You’re welcome!
By the way, harbor freight sells 30 piece roll pin kits, you can pick what ever size you want to use as a roll pin
😀
Pretty cool Frankenstein build
Thanks!
Wat u recommend for replace shocks for the wopracing blitz berg truck
Haven’t tried any yet. I superglued the one that broke and it’s been fine so far, since it squeezes down into the shock mount. I’ve heard redcat machete shocks and Traxxas Maxx shocks might work, but I’ve never tried.
@@DerbyCityRC ok thanks wat u recommend for a first 6s a kraton or outcast
@jesusgonzalezmachado just depends on what you want to do. Outcast will be better at flips on the air, and a Kraton will have better ground handling. The my 4s outcast still handles nicely as well.
@DerbiCityRC did you tried to use MJX telescopic driveshafts? I saw them on the background of scenes. Are they not long enough?
I did try. I was hoping, as that would allow the reuse of the diffs and axles, but ya they were too short.
@@DerbyCityRC Thanks a lot!
Hey man u a bad man. I bought mine for speed runs. I don't jump it. But that wheelie bar worked very well to punch it
Glad it was helpful!
What's 3s mode? I just plug a 3s in but mines a 16208
It’s specific to the H14BM and the bezgar HP141S. Only RC I know of that needs 3s mode turned on lol.
You should design you own cars.
That would be awesome if you could collaborate with some of these companies.
I’d have to figure out the proper avenues to do such things but a collaboration like, being able to buy either the regular mjx or derby city edition would be cool 😅
Looks like you got yourself a one-off MJX Kraton EXB 3S 1:14, which happens to be FAST AF too, nice!
Haha! Thanks man!
Some car reviewer says wheels and stearing has a lot of slop on this car...how does it compare to arma slop ? Thanks
Ya the slop is more pronounced on the right side. I ordered a kit that may fix that, but it’s on backorder so hopefully I’ll be able to report a fix for it. Most cars have slop in the tires. They’re just not built to that tight of tolerances. My guess is it really won’t help much, it’s just that these cars come so narrow and are so fast, they are tough to control. This project really helped with it!
Can anyone help me with this rc? I lost a screw. According to manual it’s number m25845. I think on the initial review of this that screw came out also. I can’t find where to get them. Thanks
Which screw is it? What’s it hold together?
There's a 4S 1/10 MJX coming, called the 10208. And it looks dope.
Yes. Yes it does!
Jake Johnson is doing Rc videos, pretty cool!
Well with The New Girl being over, I had to find something else to do 😉
? What is a good hold down tape. For my mini GPS
I’ve got a new gps coming. Should be much better and I’m gonna do more to protect it 😂. Should be in the next couple videos but I haven’t really decided on a plan yet. In the mean time, this stuff is pretty good. amzn.to/4azf9j2
@@DerbyCityRC thx. Good looking out Bru. Just order some. Wally b. In Vegas
@wallacebates6454 awesome man!! 🔥
If you had to pick this car or the 114 Jetwood, which one would it be I've been down the rabbit hole on this, but your opinion will definitely help my decision
So the jetwood is almost exactly the same thing. I actually declined them sending me that because it’s so similar to this car and the Bezgar hp141s I reviewed. But I believe it’s supposed to have stronger gears and axles, plus has chassis stickers lol.
It’s apparently the “higher end” model. Still actually mjx. So I’d probably go with the jetwood just from what I’ve heard.
great mod Evan.
Thanks bro!!😎
Love the shirt
Hah, thanksn
love the hyper go lines but wouldn't buying a higher tier or building be better at this point?
For some people yes, and for some no. I like all my high tier stuff, but don’t want to run them every single time I bash. Plus for me, improving things is not only part of the fun, but makes the car more fun to enjoy as well. Just all depends on what each individual person wants to do.
It looks way more stable now
It was my initial concern
It certainly is!
I just tried something different I put H16BM arms on front on the H14BM and the suspension feels way better with the 1/16 scale arms on the H14BM
Interesting!!!! Good to know, thanks!
Did that shorten the stance at all?
@@DerbyCityRC not too much
@NeighberhoodRC good to know!!
@@DerbyCityRC have ya H14BM ever stop doing wheelies, mines started making a funny noise and not poppin wheelies but when I open it up all gears seems perfectly fine , I switch motor to see if it was the motor but still doing it
That’s weird. I haven’t had that issue. Maybe hit the esc button 5 times to make sure it didn’t switch into 2s battery mode?
Is there anyway to make the turning better on this car?
In stock form, or this one I modified?
@@DerbyCityRC In stock form. Anything I could do to make it turn sharper? More like my Arrma?
@ChristopherRobinFPV
I don’t remember it not turning sharp. A couple things to check would be that the dual rate knob is turned up (though I can’t remember, this model may not have that adjustment anyway), the servo saver screw could be loose or it could be binding. As far as I know there’s no way to change it any other way. 🥺
is the hbx plastic so much better?
Yes it’s much more flexible and less likely to snap.
Good morning LET'S GO 🔥
🔥🔥🔥🤘
Is it true that MJX hexes fit on rlaarlo terminator?
Love your videos man, Ive order mine and my little guys RC cars based on your videos and suggestions!! Keep it up😊
I haven’t tested but they are both 12mm so in theory they should.
Thanks man! Which did you order?
Got the HBX 16889A Pro for my son ( so far I've used it more then him lol) and I ordered a Omni Terminator for myself, havnt gotten it yet but I've read some things, mostly good, few bad.
@justincremer4638 ya the 16889a is just a tiny little tank!!
The terminator is great! Honestly just due to all the hype and the shipping complaints, people are just expressing more concerns than you would usually see on social media I think. There’s definitely been issues but seems most people are happy. I see issues all the time on the Arrma pages with brand new vehicles. It happens but hopefully won’t be many like that!
Sweet thanks man that makes me feel a little better
@@DerbyCityRCdo you know of a good tool set I can get that has what I would need to work on the HBX and Terminator sizes?
I used the tires from the 1/12 HBX 903 and it won't roll over anymore on concrete.
Those tires aren’t too bad. They’re really light weight though. Are you able to do some sweet air maneuvering? They do definitely slide pretty nice!
You have 350 in your pocket to buy a rc what ya getting??
Amazing video as always!! The way the hypergo h14bm should have came out the box!!
Sorry I’m late here!
Probably either a granite or a vorteks.
Ooor even that new WOV racing monster truck! Did you get something?
Thanks man!!
Hopefully mjx is watching and build it
They definitely watch us and so does HBX so hopefully 🤞
Bro
You've just developed Ver. 3 of this RC Car.
I believe the company will fire their R&D and offer you his job😁😉
Haha! Whoever said ya let’s make it the same width as the smaller cars, maybe should be! Lol
Thanks dude!!
I’ll have d it to you bud you wacked some stuff harder then most things would take
lol thanks man, it did well!
Did you tap the power button 5 times to unlock it?
Yup. Thats in the video 😃