You can bypass that alarm module and get rid of it if you want. Find where the alarm plugs onto the controller, unplug the alarm from the 3 pin connector, then connect the two outside pins on the female connector from the controller. Do not do anything with the middle (black wire) pin, it will be unused at this point. Your simply connecting the positive voltage that was going into the alarm to the output wire that was coming from the alarm.
Press the top right twice then the bottom right once to activate
You can bypass that alarm module and get rid of it if you want. Find where the alarm plugs onto the controller, unplug the alarm from the 3 pin connector, then connect the two outside pins on the female connector from the controller. Do not do anything with the middle (black wire) pin, it will be unused at this point. Your simply connecting the positive voltage that was going into the alarm to the output wire that was coming from the alarm.
Da che magazzino lo hai preso? PL ? PZ?
verkeerd om marioot
È successo anche a me, devi smontare la pedana e togliere l'allarme, uno nuovo costa sui 15€
lho appena ricevuto e non si accende
U are not doing it right
non devi schiacciare il tasto di accensione e dopo quello di sblocco devi schiacciare prima quello di sblocco e poi di accensione
I think you’re doing the opposite