Video není dostupné.
Omlouváme se.
HK/KWC USP NBB airsoft disassembly and power reduction
Vložit
- čas přidán 7. 02. 2021
- This gun is one of my favourite backup guns. In this specific older model, the used a LOT of metal on the internals which was really nice to find out. I dont know if newer models do come with metal internals, as newer M&P40 NBB from KWC do not. The only drawbacks of most of NBB guns are trigger pull and the insane FPS they have. The first is just there by design and you can't do much about it (and believe me, this USP has a much better trigger than the TM MK23) but the second is actually fixable. I have had plenty of success in KWC models by reducing the hammer tension. In this particular model, Its really easy and fast.
I also decided to make the video of a complete disassebly, because there is not much info on this replica and how to get to a full disassembly.
Well, I hope you learn something new and that you can use this to make your airsoft USP a CQB able gun.
Please give it a thumbs up if you found it useful!
Enjoy!
the magazine is stuck inside of it and i cant pull the slide out. Help!
I'm sorry but it never happened to me, I wouldn't know how to unstick the mag in your situation. It might be the inner barrel unit, check if the inner barrel looks too inside and if it moves with the press of the trigger.
Thank you very much, this was really helpful and you deserve more subs
Really glad to help! I knew this would be useful for someone, is nice to see your comments.
Thanks for the video, I noticed something, if I press the trigger real hard with the safety on, the trigger will pull the safety into firing mode, is this something by design or something is wrong with the safety mechanism?
It's not by design, probably the mechanism has worn.
@@Machiflores any way in which I can fix it, the one I tested on the store had the same issue, mine was brand new and has the same problem.
If i'm correct there is a lot of trigger connectors that break after use for this Umarex USP, so lowering the hammer spring tension would actually prevent the connector to break right ? Thx
I can't say for sure, as I only have had two of these and neither broke. But certainly does lower the transfer bar stress.
Thank you for this! Finally found a video on how to deassemble this thanks to you jw have you done any mods for this any advice turning it to full auto or making custom blow back by a big chance lol
Hi! Thanks for the comments. I have not made any mods to it, even a better hopup mod would be hard (tried in a similar model with no luck). You probably can introduce a threaded outer barrel. About making it full auto, in this case is impossible, you might be lucky with a ggb, but nbbs are impossible
My gun dosent shoot when the mags in
That could happen because many things. Did you try different mags? Maybe the hammer is hitting with low energy and you need to go back a little on the bending of the spring?
So this was a tutorial how to make the gun stronger? My english not so good thats why i am asking
No, on the contrary, is to make the gun weaker.
@@Machiflores why would you want to make it weaker.? how to make more powerful.?
@@Machiflores ah ok lucky that i havent done it
@@Brettly01 regulations on my country prevent this gun to be used in the airsoft fields. For plinking, it's ok as it is, but for airsoft gaming is too powerful. That's why
Mine isn’t moving at all .