WHY DOES MY SCOOTER BOGS DOWN WHEN I GIVE IT GAS

Sdílet
Vložit
  • čas přidán 24. 07. 2024
  • HOW TO FIX A BOGGING DOWN SCOOTER, THESE TIPS APPLY TO 50cc/150cc CHINESE BRAND SCOOTERS AND MAY APPLY TO OTHER BRANDS
    TIPS:
    1) CHECK AIR CLEANER (IF DIRTY
    2) CHECK FUEL FILER (IF DIRTY)
    3) CHECK PRESSURE REGULATOR (DEFECTIVE?)
    4) CHECK VACUUM LINES
    5) CHECK MANIFOLD FOR CRACKS
    6) CHECK MANIFOLD GASKET (DEFECTIVE?)
    7) CHECK SPARK PLUG-REPLACE IF NECESSARY
    8) CHECK CDI BOX (CONTROLS SPARK)
    9) CHECK CARBURETOR METERING ROD-PLUNGER-
    NORTHERN NEVADA:
    VISIT: SCOOTER CITY RENO ATV
    920 MATLEY LANE STE-6
    CALL 775-856-3398
    OUT OF STATE ORDERS: SHOP
    www.scooteratvsales.com
    (Call Before Ordering to Confirm Availability)
    CALL 775-856-3398
    ORDER NOW!
    Get Universal Chinese Parts
    www.scooteratvparts.com
    Instagram Link
    / scooteratvs​. .
    Shop for Parts:
    www.scooteratvparts.com
  • Auta a dopravní prostředky

Komentáře • 43

  • @user-zo4vg6xd8v
    @user-zo4vg6xd8v Před 11 měsíci +2

    Thank you for your video.

  • @user-zo4vg6xd8v
    @user-zo4vg6xd8v Před 11 měsíci +1

    2020 ice bear vision 150cc I put a cone air filter and it restricted air flow making it bog at high throttle. 60mph top speed.

  • @fitboi808
    @fitboi808 Před 10 měsíci

    Aloha from Hawaii love your content. Can you make a video of how to properly tune your carburetor? Moped shopes here in Hawaii are ours away from where I live and it would be very helpful and convenient if you could show us how to properly tune the carburetor. I have 150cc gy6

    • @ScooterATVSales
      @ScooterATVSales  Před 10 měsíci

      I have a couple of videos on how to fine tune the GY6 Carb. via moving the metering rod needle clip and changing the jet sizes. This takes time and patience

    • @ScooterATVSales
      @ScooterATVSales  Před 10 měsíci +1

      I have a couple of videos on how to fine tune the GY6 Carb. via moving the metering rod needle clip and changing the jet sizes. This takes time and patience

  • @appexanthony
    @appexanthony Před 5 měsíci +5

    i was riding my moped and when i full throttle after a couple of minutes the speed starts decreasing on its own without braking

    • @ScooterATVSales
      @ScooterATVSales  Před 5 měsíci +1

      The video tips will help with isolating the problem.

  • @Lungwun
    @Lungwun Před 4 měsíci

    Do all these suggestions work for a 300CC fuel injected Chinese scooter?
    Mine bogs down and turns off when you enthusiastically give it gas.
    Gentle rolling off from a stop doesnt cause this issue.
    Also, the scooter doesnt accelerate past 57kmph unless you twist it to the max, then it acts like a supercharger and boosts itself forward.
    I have ordered a throttle position sensor for the dodgy acceleration and I hope that sorts it out. Dont know what to do about the bogging

  • @danvil6701
    @danvil6701 Před rokem +1

    Good job!

  • @alllivesmatter5750
    @alllivesmatter5750 Před 7 měsíci +1

    Hi please can you help me.
    I have a wangye eivessa 2 125cc year of the bike 2022 it has done 2215 miles i bought it second hand and had a months warranty which has run out.
    When the bike is ticking over I have a mass of blue smoke coming out of the exhaust and the bike cuts out due to excess of smoke.
    The carborrettor is an EFI. At present I have not messed about with it.
    Is it possible I have a leak on the carburetor or is it a case of piston and rings need replacing along with the valves and seals.
    I have ordered a compression test kit and will do a test.
    Please can you give me some advice if it is possible the the carburetor mixture or a hose leak within the engine bay.
    Cheers

    • @ScooterATVSales
      @ScooterATVSales  Před 7 měsíci +1

      I am not familiar with that brand or model. Please contact your local dealer or manufacture.

    • @alllivesmatter5750
      @alllivesmatter5750 Před 7 měsíci +1

      @@ScooterATVSales I don't have a dealer in my local area to have the bike serviced.
      I'm not sure if its piston and rings along with valves and seals need replacing as its seems to be burning oil.
      I'm not sure if their is a leak in and around the engine. I have ordered a compression test kit which should hopefully eliminate the engine as mentioned.
      You have a smashing channel keep posting videos.
      Cheers

  • @vincentnavea6999
    @vincentnavea6999 Před měsícem

    You did not say whether to put clip higher or lower to remove bogging

  • @ImSrry4BeingWhite
    @ImSrry4BeingWhite Před 5 měsíci +4

    My scooter cuts out completely if you turn the throttle at all. It takes about 2 minutes of it bogging out like that before it will let me rev it like normal and ride. It seems to only do this in cold weather. Once the scooter is warmed up it rides and runs greats! Any thoughts please?

    • @ImSrry4BeingWhite
      @ImSrry4BeingWhite Před 5 měsíci +1

      Also it is very hard to start when cold. 50cc Chinese scooter

    • @ScooterATVSales
      @ScooterATVSales  Před 5 měsíci +1

      Check the vacuum lines, the intake manifold for any defects and the intakes base gasket.

    • @Handlehandlebars
      @Handlehandlebars Před 2 dny

      Mines doing exact same. Idles fine. Dies with Any throttle at all.. did u find the fix?

    • @ImSrry4BeingWhite
      @ImSrry4BeingWhite Před 2 dny

      @@Handlehandlebars unfortunately I never got the problem fixed. I sold it as is for $650 and bought a Honda Grom 🤓

  • @wideeye5592
    @wideeye5592 Před 10 měsíci

    I had this problem with a Chinese 50cc moped and it was just the 3way fuel valve £7 fix

  • @jahnation6521
    @jahnation6521 Před 11 měsíci

    I want scooter to buy from Ghana can you help ?

    • @ScooterATVSales
      @ScooterATVSales  Před 11 měsíci +1

      You may want to contact the manufacturer direct. Tao Motors USA

  • @fatttony9156
    @fatttony9156 Před 3 měsíci +1

    Of first of all it’s not a pressure regulator and it’s definitely not called a petcock. It’s a diaphragm full pump that works off engine vacuum .just to set the record straight.a petcock turns the fuel off and on . And a presser pressure regulator regulates the pressure in a system usually in a fuel injection system with an electric pump but some mechanical pumps do have a regulator. Not trolling just wanted to say that so your viewers don’t get it wrong when they go to purchase parts.

  • @harigaribovic799
    @harigaribovic799 Před měsícem

    is there a reason why my scooter can't go slowly, it wants to do wheelie with a light throttle and then it goes normally with light throtle, I want it to go slowly not to do a wheelie I almost fell more than once I tried to replace the spring,weights, the situation only gets worse

    • @ScooterATVSales
      @ScooterATVSales  Před měsícem +1

      Just be easy on the throttle

    • @harigaribovic799
      @harigaribovic799 Před měsícem

      @@ScooterATVSales nah the trottle is not the problem it started doing that recentli

  • @Cristopher180-
    @Cristopher180- Před měsícem

    I put a brand new carburetor on my 150cc scooter and it started to bogged down when accelerating after putting the new carburetor. I don’t know why it started doing it after putting a brand new carburetor

    • @ScooterATVSales
      @ScooterATVSales  Před měsícem +1

      Check the vacuum lines, intake manifold for leaks.

    • @Cristopher180-
      @Cristopher180- Před měsícem

      @@ScooterATVSales I found the solution i put the old carburetor back and it doesn’t bogged down anymore. It looks like it was the new carburetor came defective when i bought it

    • @Cristopher180-
      @Cristopher180- Před měsícem

      @@ScooterATVSales also one more question my scooter battery is completely dead does the battery charges while riding the scooter

    • @ScooterATVSales
      @ScooterATVSales  Před měsícem

      @@Cristopher180- Yes

  • @xxfilipcoxx7604
    @xxfilipcoxx7604 Před měsícem

    what should i do my 50cc gives gas on its own

  • @user-zo4vg6xd8v
    @user-zo4vg6xd8v Před 11 měsíci

    2020 ice bear vision 150cc I put a cone air filter and it restricted air flow making it bog at high throttle. 60mph top speed.