STIHL MS 251 WOOD BOSS Chainsaw First Cut & Side Job
Vložit
- čas přidán 29. 08. 2024
- Tree Cutting & Felling with the Stihl MS 251 WOOD BOSS Chainsaw First Cut & Side Job.
Protective Gear - People get injured while felling trees all the time. Reduce the risk by wearing Kevlar leg coverings, a hard hat, steel toe boots, heavy-duty gloves and goggles.
First Aid Kit - In case something goes awry, have medical supplies readily available.
Chainsaw - Make sure the chainsaw has a sharp chain, a full tank of oil and gas and that it works properly.
Ladder
Rope
Ax
Wedges
Glad he kept his guide dog well out the way while he butchered the tree with a blunt saw. Nothing was done right - is his pony tail part of the safety gear? Dreadful review of a good saw
i noted the lack of safety in this immediately.
Also, always do your bottom cut on the face first.. less likely to pinch the bar depending what kind of tree and degree of lean, but MAINLY because once that top cut is there its very hard to adjust your cut at all and ur pretty much stuck with it.. but also why you ended up so deep into the tree, and in all honesty especially trees as thoroughly dead as that one want a 1/3 in at most. Brings the risk of it barberchairing, or prematurely falling from lack of support before you even start the back cut.
But at the end of the day your alive and the tree is down no damage caused so I mean you're not doing it wrong just miss matched order or simply lack of experience to know those little things... no offense genuinely, just trying to share some free knowledge.
Always good to read the comments like this one I’m new to chainsawing and have an MS251 and we just got hit hard by 97mph winds in CO… been a learning experience trying to get trees off the power lines before they re-energized them
This is the issue with CZcams, a guy that clearly has no idea can make a review video
I love that you have a disclaimer about safety gear in the description but couldn't be bothered to have any safety gear on. Not even earplugs.
exactly! i'm just shaking my head.
Looks like that’s the first time u ever used a saw Don’t Do Reviews!!
Thanks for watching!
@@guns4funcajanajustin why was this video done in such an unsafe manner? no personal protective gear????
Sawing is fun, it's the clean up that sucks. I did that last weekend with one of my trees.
Next time i will have to hire a few guys for that i was there all day. Any Fatwood?
Please buy a stihl 2 in 1 sharpener my guy, you sanded your way through those straws.
I use my MS251 daily its a great saw, good reminder about safety gear on bottom of titles
ATB Del
Thats good to know Del. I will be taking it out again soon for another side job!
@@guns4funcajanajustin hey ....hope you use your own safety advice for future saw ventures. Safety gear while sawing is well worth it. It's saved me at least twice.
That is one very scary demonstration, think safe and live longer.
Stihl are great saws !!
Outstanding all there tools
that's a bad ass chainsaw. thanks for sharing it Justin
It runs well and gets the job done more videos soon thanks
Honestly awful work.
Facts
Nice sharp chain it was spitting out big fat wood chips. You can't go wrong with a Stihl.
This is a new saw for the side job business! Not at all thanks!
Notch too deep, back cut too high, saw too dull!
And you want one?
Dead on.
Saw not dull....just no power....lol...keep up the good videos 👍
Renaissance man it has to be dull. My 180 is faster than that
False, factory chains are angle and height near perfect, now sharpness? Pretty bad honestly. 2 or 3 swipes make the world of difference especially with stihl chains.. and yes I understand its the safety chain and it does change slightly but not significantly like that, I only run safety chains on my climbing and ground saws and they work perfectly with just a little touch up..
dude you didn't have to hold it wide open cutting those limbs off chillllll!!!!
Its a good way to get the oil cycled thru a new chainsaw. breaking it in
@@guns4funcajanajustin No it's not.... You really don't know what you're talking about. When using a saw the first time you're supposed to take it easy.
Take it easy is how you break it in. There are so many keyboard commands that know it all. All I know is this saw runs well and has cut down many trees. How is yours? LOL
Survival Mindset I’m on here looking trying to decide on a quality saw. Leaning towards Echo.
Echo was my first saw I used it on demo houses gutting them just on the ruff framing only. They got the job done. Save a few bucks
Well at lest I know now HOW NOT TOO !!!
That poor saw won't last you long 😂😂😂
Facts
Who taught this guy how to cut down a tree!? Poor poor chainsaw! I mean he dropped the tree so over all success but dude take it easy on the saw...
Great saws. Ear plugs or hearing protection would be a good idea as well. Thank you for the video, Justin and Jana
Thanks! I have load's of hearing protection i shoot guns. I will have to add it to the list below. Thanks
I have the smaller that I use for trim and it keeps good. great saw
Cool deal it is a excellent product Stihl makes!
That saw is one more mean saw . Nice work!
Yes sir it ran smooth i got to take down 3 tree's that day and i hauled them off.
Is this the first tree he’s cut down
Good vid man ! Dont be afraid to use the side handle with left hand ! & helps to not fully rev it out when bucking branches ! feather the throttle ! well keep up the good vids be safe out there!
Thanks! The side handle is key when bend down low thanks for the tip. Will do!
I want this one after I had great experience and first one in all with stihl chainsaws, stihl ms180. Then this is next one in my order list to do the job.
It is a great saw for smaller loads
If price isn't a problem, the 261 is a good saw.
hell yeah bro took them trees down quick! love the slow mo!
Yea it droped dead on on the mark. I used 2 cameras on the film work thanks
ok...look at the safety recommendations in the description. So felling trees here...no hardhat. no gloves. wow...
How has it held up so far I'm thinking of trying this one
It has held up well. I have put it to use a lot.
That's the same saw my father owns..works good for size of it.
No to bad for the size at all nice and light to get around up there.
Hey Justin, you need to come to Florida. I've got about 6 pine trees that are so tall they touch the clouds. I need to see them gone....keep dropping limbs and busting my lania screen!
Jeff if i lived closer we could do that! I like the new side business! Will do thanks
looks like it gets the job handled no problem !
atb john
It was a good little side job and handled well!
nice ! I cut a 60' dead pine last wknd, dropped that dude exactly where I planned, my buddy's house he was quite nervous he only used a chainsaw couple times , I made him cut it lol, used a wedge to pop the hinge
no fatwood though...
Not on this one i hope the next customers need some cut down
Cool deal! Good to know the hinge controled the line of fall.
sweet great job man great product
Thanks my friend!
Here come the chainsaw masters in the comments
I now so many of them lol.
nice saw brother
Thanks John it does the job!
Hi, guys please note that this way to fell trees is extremely dangerous. He looses nearl all control over the tree by cutting a much to deep notch.
czcams.com/video/8DEt1GewJxA/video.html Shows how to do it properly
Your pony tail hanging loose made me nervous
Not bad but , sharpen chain , slow the rpm down , push a liitle harder , piece of advice , always have wedges and axe with you .
Yes and no... yes a new chain is better but ive been doing this for a living for quite a while and you'd be amazed, at what 2 or 3 swipes with a file will do to a BRAND NEW factory stihl chain.. but I mean of course Oregon carbide chains are better... and he means use the teeth o. The bar more.. one the bar is 1/4 inch in just use one hand and lightly lift up/forward, will make the world of difference. Also decent job on ur face cut, but you should be cutting them in between waist and chest for multiple reasons, better visibility of cut, easier to watch the top and cut right before it breaks free, but MAINLY ur less likely to die of it barberchairs on you, also just easier on back.. but all around safer and I only have to ever cut 3-4 extra 16" rounds off the stump to bring it down.. hopefully this helped. Good job though sir.
A-Man with a chainsaw all trees watch-out !!!
Get the job done thanks for watching
The technique was far from perfect & the saw doesnt suck, it has a anti kick rookie green chain on it, If you put the yellow aggressive chain on it, its a whole new beast...but you dont seem ready for a yellow chain judging by the way you handle the saw....also you better invest in a pair of kevlar chaps and a helmet because I can see a barber chair coming your way.
Face cut to deep and notch is to big. Don't think can sneak in that Esee shirt. Best knives on the planet.
Did you observe the job not. Power lines and water were a big factor.
Seems like you need to touch up the chainsaw blade some,chips seem like there coming off like saw dust.
Also a smaller delimbing saw would work better
Chainsaws don't have a blade. They have a bar, and they have a chain.
Great video hows it holding up? I think people down below don't realize wood type can vary on the speed of how everyones saw is cutting if i use that 251 saw in soft wood of course it would outcut the same in hard.
It is holding up well
That’s a great saw in the wright hands, watch out thou it can kick like a mule, you need a strong grip on it
A lot of people are being assholes about how you did this. The back cut should be even with the bottom of the notch, but any job you walk away from is a good one in the world of chainsaws, in my opinion that is.
Nice tree chopper!!!
Thanks James!
that whole back cut should only take 10 seconds both ways....dam feller that is too dull and your reving it way to much ...let that motor chug slower ...sorry but just trying to help....
Power lines in the way just think of everything else around you. Thanks stay sharp and get it done
What are you gonna make out of that tree?
This will be just fire wood for next year. I hope to get Fatwood soon.
Chain put on backwards or wha
That's a tuff ass saw
It runs and works very well!
I'm moven on up.
looks to me that your chain had arthritis,needed some medicine like a file
that's a great saw you got there.any fatwood in that tree
Thanks! No Fatwood in that one but soon i will get a job hooked up with some this is a side job business
Where is your PPE?
I have all the gear for big jobs. This was a tree
@@guns4funcajanajustin sorry sir but that mentality is going to land you in an ER sooner than you think. Safety especially with chainsaws is no laughing matter.
This is not for you. first off the chain is dull. You going to hurt yourself or someone else.
with out up grading to a longer bar that's about the largest tree ya want to tackle with that saw
I have bigger saws and bars but i cant tackle one up to 32'' with this saw
OMG lmao i would just take this video down
agree....
I think my ms170 n I could of cut 3 trees down in that time. He is terrified of that saw. I get it, respect the saw n all but dang man. Grow a set.
Sharpen the chain properly and it will take it down in seconds
New chain and saw it is sharp
Aha. Wow!!
Came across this vid since I too own a 251, and I'm just wondering....when you're making your horizontal cut, why aren't you utilizing that wrap-around handle? You'll get WAY better purchase on the cut, and more control. Chaps and ear protection are a good thing. Don't listen to these idiots who say they're "gay"...I think I saw in one comment. Anyway, I'm not trying to bust your balls, and I'm no expert....but I have done my research. Just trying to lend a hand. Don't need you meeting your dear and fluffy lord before your time, man!!
I do time to time. I just cut tree's to clear ground out so i can build homes.
Dude, just go back to not videoing yourself with a saw. Don’t ever pick up a saw again! PEACE OUT!
is the chain dull? It cuts like crap and the saw bogs down easy
It is all tuned up i just pulled it out this was the first run.
Are you disappointed in it? I've got a cheap poulan walmart saw that cuts better than that when the chain is sharp. Thats a high dollar saw
No it gets the job. It has done better then any other saw i have owned including a poulan chainsaw. It will out cut that $100 saw. LOL at cuts better that is a joke
That saw should have cut that tree much easier, you need to check the chain
This is how to die young. Or just at the age you currently are.
That poor chainsaw
Good thing that tree was already dead!! Otherwise you killed that SOB!! Haahaaa!! Justin Bunyon!! Lmao! TFS
Dead as a door nail. Lip Ripping Aaaron Nelson! Timber Justin Bunyon lol
Dude your chain is super dull!
nuff already
It is cutting strong
That dull ass thing wouldn't cut hot butter
Wow. Let her eat I guess
Saw sucks and you need alot of practice...get some chaps bro
Thanks for watching. Get yourself some chaps and make a video. Then we will talk
@@guns4funcajanajustin why not take the time to use your safety gear and set a good example in your video? You totally lacked safety gear in this review. Your commenter was spot on.
You don’t know how to use a chainsaw.
Looks dull as hell.
Chain wasnt that dull dont think was throwing some descent chips. Yes knotch too much ange and bottom cut not straight. Back cut way too high also. But wear a face mask on helmet to prevent blindness. Chaps too. I thought we were gonna see ambulence or part 3 of pieces!!
LOL with a wedge cut that big he'll never get trunk kick back 👀👀👀👀👀
American Barry Chuckle
What do you got going? Chuckle
I would not recommend wide open on small branches.
Nice hack job bud
Please turn off chain saw after every use., Fior the safety of you and others. Thank you
Has no clue how to fell a tree 😂
that was barely in the same zip code as a perfect drop. also, where's your ppe? You can't tell people what to wear on your video, then wear none of it yourself! set a good example and show you wear it.
Thanks lol. I do own PPE stay safe kids.
Do you use PPE when using a reciprocating saw?
SPOT ON! He's setting a bad example regards to safety.
@@guns4funcajanajustin so ...ha ha ha...why not wear it? Safety is no laughing matter.
Nice saw shame about the chain lol that needs sharpening
First run and not the last
Get the Stihl file kit really cheap
Made in china ?
if ya go to a 30 inch this will put that engine at the top of its ability but its a stihl it will handle it
I have bigger saws for the bigger jobs. I would never put a 30'' bar on a chainsaw made for a 18'' bar. but i can tackle a tree up to 32'' with this saw. if i a clear drop and a sharp chain. It can handle a lot thanks
#Hellyeah Freaking cut that wood #Yeehaw
Fatwood soon to come i hope!
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣😄😄😄😄😄😄😄
Jaja no tiene put idea
Mało co nogi sobie nie obetniesz chłopie brak slow
Чувак лісорубів то не твоє
It was an ugly tree anyway...
Lol
Pretty sad for a 370 dollar saw.
Try that with a sharp chain you make the saw look bad man that saw is dull as _hit I've used one you make it look bad dont care what you have to say about it fact is a fact you shouldn't be running a saw.