Video není dostupné.
Omlouváme se.
Ghost Key - Push to Start Conversion Kit - How it Works
Vložit
- čas přidán 9. 06. 2022
- ►Follow us on Instagram @JordanDistributors
►Visit our website www.jordandist...
►Contact us sales@JordanDistributors.com
►linktr.ee/jord...
We currently offer kits for the following vehicles:
88-11 Civic (Excluding Hybrid)
93-97 del Sol
90-01 Integra
02-06 RSX
04-08 TSX
99-08 TL
97-11 CRV
03-11 Element
95-11 Odyssey
01-06 MDX
03-07 Pilot
90-07 Accord (Excluding Hybrid)
92-01 Prelude
07-13 Fit
01-03 CL
Add some much needed security to your vehicle! Make it harder for thieves to steal your pride and joy while adding the style and functionality of a modern vehicle!
-1 press is like turning the key 1 click
-2nd press is like turning the key 2 clicks
-3rd press turns everything back off
Or press the brake pedal and press the button and the engine will start
-Easy Install
-Plug and Play
-No programming, even if the car battery dies
-No cutting
-No splicing
-Even works with performance engines that take longer to start! (Just hold the button until the engine starts)
This kit is completely plug and play and will come with everything you will need to install it in your vehicle.
*If you do not see your vehicle listed we may have one available soon as we do have other applications currently in development.*
No cutting or modification is necessary.
Install time is approximately 30 minutes.
Please note that these vehicles all use different style connectors and you will need to select the proper year of your vehicle at checkout. If you are unsure please feel free to contact us and we can help determine which will work with your vehicle.
Would this work on a Toyota celica?
Can I put the 1st and 3rd switch on the on position (down) and the 2nd and forth stay how they come for start up or only one switch is allowed at the time?
Would it work on 2004 Silverado?
How would I go back and forth from the on position back to accessory mode? Some cars need this to program keys and it only allows a power, on and start cycle but never the option of back and forth
This will function just like a factory push to start system. You can accessory without starting the engine by pressing the start button without your foot on the brake pedal.
Do you make a ghost key for older Volvos?
What are the differences between this new kit and the older one?
Can you still use the remote start option from an aftermarket alarm with this system?
Yes
I love these kits. I tried figuring out how to do this 15 years ago. Using relay system which was full of problems. I own a Honda Pilot and have thought about buying one. The only thing stopping me is having to use the tag as a key instead of factory cars using proximity key.
So I guess my question is. Is there any thought into using a proximity key set up? And is this impossible for some reason I don’t know?
We have been hesitant to offer a proximity key or passive keyless entry system due to security concerns. Even in new vehicles, such as new Honda and Dodge models, thieves are able to capture the signal from the key from around 30ft away and are then able to repeat the signal and unlock and drive away the vehicle as if they had the actual key. These vehicles are being stolen is surprisingly high numbers. The system that we offer uses encrypted RFID keys and a potential thief would need to be within inches of your key to be able to read the signal. So close that you would notice someone attempting to do so.
Another stupid question but if my start at ignition went out but still have all battery accessories can I install this instead of buying a new ignition
Yes, this system replaces the factory ignition switch
I wonder if they’re going to sell these for Miatas
would this work on a 2014 challanger?
I wonder if they’re going to sell these for Miata’s
just had my stolen with a shaved key, i absolutely want one of these!
Can i use a aftermarket alarm along with this?.
Yes 👍
Will these ever be available for Mazda??
Yes. Please send us an email: sales@JordanDistributors.com
Stupid question: how would someone lock and unlock their car or even set their car alarm with this system installed?
With Ghost Key installed, the factory key fob will remain functional and you can use it to lock and unlock the doors like normal.
You're just bypassing the key ignition, not the security system
Do you have this available for Subaru's?
Wat if I have an alarm system with remote start ? Will the remote start still be functional ?
Yes
Installation is easy if your car don't have alarm or remote starter. Mine still in the box as local stores don't even want to try make this work with car alarms with remote starter.
Please send us an email, we can help you get your alarm installed
It works right along with them
The only downside is takeover
When remote start has the vehicle you have to hit the brake, let the remote start shut off
And restart the car.
You CAN take over by scanning the fob and pressing the start button twice NO BRAKE
HOWEVER, the system will think it's just in "accessory mode" and the led will flash and the car can be stopped by pressing the button ONE time with NO foot on brake, so those is kind of dangerous!!!
If that does happen
Place car in N quickly
Gently touch brake (enough to engage lights but not stop)
And touch button twice, unless you wait 30 seconds then you will have to scan the key fob!
I want the vehicle to remain unlocked for as long as i need. Can the 60 second wait time of dipswitch 2 be nulified?
You can put the system in to valet mode to keep it unlocked until you scan the key again. Scan the key over the antenna, you will hear two beeps. Then, continue to hold the key over the antenna until you hear a series of beeps. The system will now remain unlocked until you scan the key again.
how can i program a key fob with this setup, programming mode requires you to swap directly between ignition (2) and ignition (1) without turning it completely off. is there some setting i could change to keep it from going to ignition (0) on the third press?
How to program Honda key fobs in vehicles with Ghost Key
1. Enter your Honda, shut all doors, and have your key and fobs to be programmed ready. (All key fobs will need to be programmed at the same time. Any fob not programmed now will be deleted from memory)
2. Scan the push to start key fob and press the start button 2 times without your foot on the brake, this will put the vehicle in the “On” position. On the fob, press and hold the “LOCK” button for one second.
3. Release the button on the key fob and press the start button one time, this will power the vehicle back off. Repeat this process twice more.
4. After the third time of repeating this process you will hear the door locks cycle, your vehicle is in remote programming mode.
5. Hold the “LOCK” button for one second. Your Honda key fob will be programmed once the locks cycle again. You will now need to press the lock button on any additional fobs that you would like to program and the door locks will actuate to indicate that they have received the signal from the additional fobs.
6. Exit remote programming mode by pressing the start button one time without your foot on the brake to power the vehicle off.
Does it matter if dip switch for fuel pump is on?
How does this integrate with door lock key/fab? or would i just remove the "key".. (accord 06)
The factory key fob will remain functional to lock and unlock the doors and trunk
Does this bypass the switch on the clutch pedal for clutch less engine starting?
It does not. However, you can disable this if you would like
Do you need to scan the fob each time to start it?
Yes 👍
whats the difference between ur $150 kit and a $70 dollar kit off amazon?
Our kit uses much higher quality components than that kit. We use USA made Microchip brand chips, higher quality and higher amp rated relays, a higher quality button and horn and also higher quality wiring. We also back all of our products with nearly 24/7 customer support and a full 12-month warranty.
Do you guys have a install guide for 96-00 civics?
Yes we do. You can find it here on our CZcams channel or under the install guide tab on our website. I will also link it for you below. If you have any other questions please feel free to reach out to us, we are always happy to help!
czcams.com/video/RuuVFNDQUHs/video.html
OK I need the whole kit for my 2009 F150 what do I need exactly could you send me the links
Please send us an email, we’re happy to help.
Sales@JordanDistributors.com
does this work on JDM version Z33 (350z) ?
Yes
Need a kit for Subarus.
What’s dip swithc number 4 do
dip switch 4 will not be needed for any of the vehicles that we currently offer systems for
I have the first kit you sold does it have the switch 1234?
It does not, this feature was added when the Ghost Key system was released. We can offer you an upgrade kit if you would like. You can email us at Sales@JordanDistributors.com
Is this the updated version of your current push to start?
Yes it is 👍
which is the best option in dip Switch 1,2,3,or4???
We prefer to leave them set to the factory settings, all switches in the up position.
@@JordanDistributorsincI find that interesting, I would think it’s ideal to at least have switch 3 in the down position so the fuel pump gets primed 🤔
So u don’t need to push clutch? Just the brake?
Our kit will not interfere with the clutch switch. If you need to press the clutch currently then you will still need to press it along with the brake after install of our kit.
@@JordanDistributorsinc ohh Oky thanks
I have a 2002 Chevy Impala I can't get it to start once I remove the main harness from the ignition
We don't currently offer a kit for that vehicle
What number 4?
Number 4 is for Brake Switch Return Current Mode. This is only needed for a select number of Volkswagen vehicles and is not needed for our current offerings.
does this make the doors automatically unlock, when you approach the car?
No
Correction. Positive battery terminal.
You can disconnect either battery terminal. The result will be the same
Never disconnect POS terminal without FIRST disconnecting NEG
If your tool touches the body of the car it can arch and the battery could explode
So they are correct
Disconnect NEGATIVE battery terminal !