Mitsubishi Outlander PHEV replace head unit / Stereo for CarPlay
Vložit
- čas přidán 14. 07. 2023
- MunkyBunky Video of how to replace the PHEV Head Unit for another unit with car play.
Link to the Pioneer Head Unit DA360DAB
amzn.to/43sL5lu
for the Mitsubishi Outlander Double DIN Fascia, Steering Wheel Control and Interface Kit (CTKMT09 )
amzn.to/3DdrKKL
Long Nose Pliars to remove DAB aerial connector
amzn.to/3rt5t99
For the DAB OEM aerial retention
amzn.to/44ujLVu
DAB Extension
amzn.to/3NQGWSR
For the rear view camera retention
amzn.to/3PZIbSu - Auta a dopravní prostředky
Do you still get the trip info for the ev?
I can now also confirm the rear view camera does work and switch's automatically if you connect the back of the head unit to the positive of the reverse brake light. I ran a lead from the unit to the break light to test and then wired it in properly under the trim.
thanks you for the video, help a lot
No Worries happy to help
Great video but would be good to know if the car's all round camera still work and also how you access all the other controls that the original unit had - EV info, various settings screens etc.
Mine just has a rear camera and that works fine :). In terms of the other settings you can still use the app, however I found I never really used them.
Hi! What did you end up doing with the wifi unit? Did it attach to the pioneer headunit or did it get put somewhere else?
I just left it connected but no lead to the head unit, I can still connect via WiFi through the pp
Did your wing mirror camera still work? I assume you have one given you have the button your steering wheel
No, no wing mirror camera's on our model
How does the factory camera retention lead connect?
Plug in the existing camera harness into the female camera retention socket, plug the yellow male RCA into the camera female socket. For the camera display - there are three cables in this particular scenario. One reverse trigger/signal cable from the pioneer head unit fuse lead, one from the camera retention cable and one from the pioneer harness that provides power (if I remember correctly). Join them all together and the reverse camera display will takeover each time you select reverse gear. Hope this helps someone reading this!
Nice video. Few questions:
- do you still have access to the back camera when reversing?
- can you schedule battery charges?
- can you schedule remote heating?
Yes we still have access to the rear camera, yes you can schedule the other stuff through the app as I left the Wifi module in place.
Many thanks for your quick response. Essentially unless you have the original infotainent system, the only way to interact with scheduling battery and heating is throught the app.
The app sometimes could be a bit challenging 😅 In my case right now the red schedule button in the app doesn’t show up to me 😢
That has also been my experience@@javiermelladomusica
Did most of the cable juat plug in easily? Any soldering, rewiring etc?
yup pretty much all plug and play
Thank you, great video by the way. I have the same car and wish I had seen this before I bought my chinese android head unit that im struggling to get the factory camera working with 😅
Hi is the rentention camera lead for 360 camera?
Its for the standard OEM camera however you can purchase this connects2.com/Product/ProductItem/CTSMT012.2 which I think will do what you need.
Does the microphone work ?
Hi, I added the Microphone that can with the new head unit so I don't know if the car Microphone works with the new unit. I perhaps should have checked first.
@@Munkybunky Where did you place the new microphone ?
@@dstroem I placed it under the steering wheel column, that said I am going to move it to above for better clarity