My first 3D printer! - JGAURORA A5 - with setup tipps!

This printer was send to me by gearbest.com to review.
If you want to support me, you can order your JGAURORA A5 with the following link:
www.gearbest.com/3d-printers-...
Step by step to a better 3D print with the JGAURORA A5
1) Assemble your printer and perform the bed leveling
2) Install Ultimaker Cura on your computer
or replace the software directory name on the USB drive with the chinese characters with english letters
and install the delivered software.
ultimaker.com/en/products/ult...
Use the ini_file from the JGAURORA A5 USB Stick to setup Cura for the 3D printer.
2) Start a string test
www.thingiverse.com/thing:288...
To find a setup with no strings the following tips may help
- lower printing temp (to hot will result in fine strings)
- faster retraction speed (75mm/sec)
- make sure that retraction is actually enabled in cura
- correct retraction length (4mm was perfect for my filament)
- find the correct Flow % for your filament ( 93% was perfect for my printer with the included filament)
The flow is different for each filament
Some filaments are simply prone to stringing and no matter what you do it might be all but impossible to completely eliminate them.
Even different colors from the same manufacturer can differ in how much they string.
Troubleshooting:
www.simplify3d.com/support/pr...
support.3dverkstan.se/article/...
3) Print and install a better cooling duct
www.thingiverse.com/thing:275...
4) Print and fine tune with the calibration cat
www.thingiverse.com/thing:154...
5) If your printer setup is done, you are able to print such amazing things like the "Print-In-Place Iris Box"
But read the Post-Printing comments on thingiverse
www.thingiverse.com/thing:181...
5) You will find on thingiverse thousands of interesting files to print
www.thingiverse.com
6) The Unofficial JGAURORA wiki:
jgaurorawiki.com/a5/modificat...
My main pros for the jgaurora a5
- very good price/performance ratio (May 2018)
- Pre assembled
- Big build volume 305 x 305 x 320 mm
- Resume option (power failure recovery)
- Filament monitoring sensors
- perfect working 2.8" Color touch screen
- Print bed BDG heated platform (work perfect without tape or other things)
The Song is:
Lights by Sappheiros / sappheirosmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Lights - Sappheiros (N...

[@pensandcalls]

Your FIRST printer and already you're giving tips? Amazing!

[@alansmith3720]

Yes she was my fist too, love at first site but then things started to go wrong and fall off like the black diamond coating and when I contacted here mum, JGAurora in China she sent me her sister over and told me to just stick it (Glass) on top of the old one.
Well all that extra ware and tear due to the extra weight burned my stepper motors out and it took a lot longer to warm up and then I discovered the guarantee was worthless because her uncle, AliExpress would not stick to the deal.
Lets hope Gearbest are better than AliExpress when it comes to people wanting there money back because so far I have had nothing but trouble.

[@alessandrocampetti1357]

usi cmultimaker cura per collegare la stampante 3d jjgaurora?

[@rudolf5489]

Uuuh neues Spielzeug 😂🤣😂

[@paulcumber4732]

Cool 3d printer where can I get one at

[@TheissHilmar]

www.gearbest.com/3d-printers-3d-printer-kits/pp_1054909.html?wid=21&lkid=14130891