This video eventual fix for JBL horizon Bluetooth speaker clock if you plug it in the power and still not work - in this case the connection port was broken .
You can open it all, White side : just pull the center, after you will access to screws that maintain the led cover. Black side : all screws around are easy, then remove the plastic that cover the screen, it is just lightly glued, then you will access to the last screw. On side : there is 3 crews in usb port. But there is nothing to find in... the wire of the shitty connector, that is hard to reconnect, is very short and you can't improve the ease of reconnecting it (it was my goal... but...)
Thanks this is really helpful. Although i cant get it to work yet. I dont know why i can't get the solder on properly so its still kind of loose and only turns on when the cable is turned just right
Thanks very much for this and your other video. By accident i turned off the electricity source to my JBL and when i turned it back on, the radio only has the light but I cannot see the clock or turn on the radio or anything and cannot turn off the light either. Would what you show here be the answer? As it seems there is still power going to the light.
Thx for your vidéo ! The horizon of my daughter as another problem, the ambiant light is always at full and no other fonctions are available... did you have some tips regarding that issue ? Kind regards
Hello I have lost the cable.They are very expensive to get.Is there any other alternative to get it running?I have a cable that has a head that fits,but missing ACDC converter.Can any other 13v be fitted to the cable ?
you dont need to glue the connector, you can pull it further out, connect it and push it back in. i have exactly ther same issue. hopefully this'll fix it
Добрый день. У меня есть отличная колонка-часы JBL Horizon, но вот беда - перестала включаться нормально, только показывает часы, но не переключаются режимы. По питанию выяснил, что не переходит в режим power_en, такое ощущение что с процессора нет сигнала на запуск. Есть ли у вас прошивка на данный девайс? На вас последняя надежда, в интернете где только не искал - нет нигде... Заранее спасибо. (SPI программатор заказал, но еще не получил, память пока нечем посмотреть)
Bonjour j'aimerais du réveil JBL horizon 2 neuf, mais au démarrage on peut voir écrit vers la date et en dessous un petit mot marqué mode démo (qui ensuite s'efface) l'heure la date tout reste affiché mais impossible de régler quoi qu'il soit aucun bouton ne fonctionne que puis-je faire pour enlever le mode démo
Thx a lot , was exactly the same problem 🙈👍
You can open it all,
White side : just pull the center, after you will access to screws that maintain the led cover.
Black side : all screws around are easy, then remove the plastic that cover the screen, it is just lightly glued, then you will access to the last screw.
On side : there is 3 crews in usb port.
But there is nothing to find in... the wire of the shitty connector, that is hard to reconnect, is very short and you can't improve the ease of reconnecting it (it was my goal... but...)
Thanks this is really helpful. Although i cant get it to work yet. I dont know why i can't get the solder on properly so its still kind of loose and only turns on when the cable is turned just right
Thank you 😁😁 I had the exact same problem and with your help I could fix it.
Thank you sir! I had the same problem! The power thing was moving, I was able to weld it and it worked 😉👌🏼
Thanks very much for this and your other video. By accident i turned off the electricity source to my JBL and when i turned it back on, the radio only has the light but I cannot see the clock or turn on the radio or anything and cannot turn off the light either. Would what you show here be the answer? As it seems there is still power going to the light.
thanks a lot
Thx for your vidéo ! The horizon of my daughter as another problem, the ambiant light is always at full and no other fonctions are available... did you have some tips regarding that issue ? Kind regards
It worked ! Thanks a lot
I have a JBL Horizon which stopped working a couple of months ago after 4 years. is it possible this happened because it's Battery ran out?
Hi, I just opened mine completely, there's a screw hidden under the clock display, that's the last screw till it finally opened completely
Hello
I have lost the cable.They are very expensive to get.Is there any other alternative to get it running?I have a cable that has a head that fits,but missing ACDC converter.Can any other 13v be fitted to the cable ?
Thank you for your time
12 volts adapter can also work
Good job 👏
you dont need to glue the connector, you can pull it further out, connect it and push it back in. i have exactly ther same issue. hopefully this'll fix it
Very helpful
Добрый день. У меня есть отличная колонка-часы JBL Horizon, но вот беда - перестала включаться нормально, только показывает часы, но не переключаются режимы. По питанию выяснил, что не переходит в режим power_en, такое ощущение что с процессора нет сигнала на запуск. Есть ли у вас прошивка на данный девайс? На вас последняя надежда, в интернете где только не искал - нет нигде... Заранее спасибо. (SPI программатор заказал, но еще не получил, память пока нечем посмотреть)
Bonjour j'aimerais du réveil JBL horizon 2 neuf, mais au démarrage on peut voir écrit vers la date et en dessous un petit mot marqué mode démo (qui ensuite s'efface) l'heure la date tout reste affiché mais impossible de régler quoi qu'il soit aucun bouton ne fonctionne que puis-je faire pour enlever le mode démo
Sir,,how many volts to supply this jbl horizon bluetooth speaker,,,thank you in advance o tia...
How about the Bluetooth . My phone can't detect the JBL horizon I can't connect
How about the Bluetooth . My phone can't detect the JBL horizon I can't connect