DIY CDI Unit for Ignition Boost 100% guarantee
Vložit
- čas přidán 31. 07. 2024
- Discover the Ultimate Homemade CDI Unit for Ignition Boost,
Hi my friend's, this is a one of the best circuit about ignition boost...
in this video i make different electronic projects In this video you are also learning electronic and how to make PCP boards And electronic circuits...
we have the best circuit of the CDI box
For motorcycles and small petrol engines
Best CDI unit box Ever Made How to make a DIY CDI unit box (AC version)
if you have a weak problem in ignition your motorcycle spark plugs,try this one
this is an extra future version of the CDI unit box multi spark.
for a mini drill And vise ,You can watch the videos below:
• Discover How to Create...
• How to make a Minidri...
• Making A Mini Metal Vi...
✅
list of All parts:
c1.c2: mkt or polyester capacitor:275 v-680 v/1.0 UF
c3:10n/c4:100n/c5: electrolyte capacitor 10uf 50v
resistors:R1.R2: 1meg /R3.47ohm/R4:1k
Diodes: D1_D3:5408
D4:1N4007
MOSFET:BT151
NTC:any Thermistor
⚠️ diagram And PCP design:in video please watch it
@MrWolfDiy
#diy
#homemade
#electronicproject
#boostign
#PCPboards
#CDIunit
make sure you subscribe to the channel to don't not miss the next videos
thank you for watching
If this video helps you, please like it🙏👍❤️
![HOW TO TEST A STATOR / WHAT IS A STATOR [step by step] GY6](http://i.ytimg.com/vi/VoXYzQ61tRM/mqdefault.jpg)
Full diagram in video, please watch video till the end
I build it it's working well❤very nice thanks for video
Thank you, the special version of this circuit will be posted on the channel soon, subscribe to the channel so you don't miss it .🙏❤️
Now that you have plenty of voltage available, open up the spark plug gaps to 1.5mm or even 2mm. Will run a little bit smoother at part throttle. Probably no increase in power though.
I tried it earlier, the initial acceleration of the motorcycle has increased a little and it bites smoothly🙏
Can you design for car ignition system?
Este video quisiera oírlo en español
Hello, dear friend, I can't translate the Spanish at the moment, but the full Spanish subtitle has been posted, I hope it will be useful for you.
Hello my MrWolf, where's the DC version of your CDI? I checked your videos there seems to be none, If none, Is this AC CDI version of yours usable to a DC-stator coil? Thanks, If yes, I will build this one instead
Hi dear friend :
I made the DC version but it didn't work properly, that's why I didn't publish it for now to do the final test. Your second question: But ac cdi can't be put on a motorcycle with a DC coil, unless you change the flywheel and coil to AC. If you have a problem with starting the motorcycle, you can ask your questions, at your service; thanks
i made it but coudnt work well. it may be my circuit fault. could you give me more clear diagram of it because the diagram in video is nor much clear.thank you
No problem , Tell me where you have a problem and I will guide you,🙏
Well done ❤, can i know whether this circuit support for ignition advance also ?
Hello, thank you, I must say that version is a replacement to the original CDI of the motorcycle (ac) and is used to boost the ignition, and the advance of the ignition depends on the type and volume of the motorcycle and its RPM, but In total, it is limited, I am making a new and special version, it will be published on this channel as soon as it is ready.
Thanks for watching
So much current drawn by the eht (ignition coil) can damege it
Hi
(just for information) special capacitors are used inside the Japanese units, I opened the Japanese example of Shindingen company, the current is much higher than this unit, but it does not cause a problem, this standard CDI unit is just for replacement
I have a vintage dirt bike can I use it I have problem with my ignition
Yes 👍 you can use it for any petrol ac engines
Yes you can use it for any petrol engines AC ignition
Nice. Can you make rectifier (RI) for bikes ?
Thanks,There are several types of rectifiers, I will make a special type soon, what kind of bike is yours?
@@MrWolfDiy rectifier and cdi for honda grom
@@warrenpeas I need to see the type of engine, take a photo of the engine, rectifier and CDI fabric and send it to my email, so I can see what type it is.
@@MrWolfDiy this is the engine. It is very popular. czcams.com/video/WMXoY6YtzUc/video.htmlsi=aaIpyMu7zrVUoMbE
Hello, dear friend, I saw the video. If the stator coil has a black wire with a red line, your motorcycle's electricity must be AC. You can use this CDI, otherwise, making a DC CDI is a bit complicated. But soon I will put the new version of CDI reinforcement. About the rectifier I recommend using the original rectifier،Good luck
Where is the circuit diagram please?
dear friend, watch the video till the end, the PCP circuit is included in the video,don't need anything else.🙏
Can it advance the ignition timing how much degree can it maximum
This CDI is to boost the ignition of ac motorcycles, the ignition timing depends on the type, volume of the engine and your RPM, you will probably face problems by changing the ignition timing. If you have any questions, you can ask.
can you share diagram
Hi
Watch the video till the end, the pcp design and parts are shown in the video.❤️🙏
Hi can u make CDI for me pleas
Hi my friend,
If you know a little about electronics, you can easily make it yourself using this video, but soon I will upload a new video about this(CDI) so that it will be easier for the public to make it,even you, and it will also have more spark power.(Super IGN)
And this is a AC CDI box or DC?
It's an AC version in another video i make a DC version to❤️
AC brother
Can I get 1 for my car?
No Unfortunately, it is only for motorcycles, 😭😭
This doesn't have timing advance in it
Hi I tested it and didn't see any problem, thanks for watching 🙏