Top 5 Reasons Your Hotpoint Washer Is Not Draining!
Vložit
- čas přidán 27. 07. 2024
- This video covers five reasons why a Hotpoint/GE washing machine is not draining. The washer in the video is model HTW240ASK5WS, however this video is applicable to a wide range of Hotpoint and GE washers. This video is part of my video series "Free On Facebook" in which I repair, reuse, and repropose items I find for free (predominantly on Facebook marketplace).
- Jak na to + styl
Thank you so much for this video I was able to unclog my pump without having to call a repair man. I appreciate you!!!
Awesome! Glad I was able to help!
Very thorough explanation. Thank you
You are welcome!
THANKS SO MUCH FOR A BIG HELP ON MY PROBLEM!! I FIX IT … WAS A BABY SOCk 🧦 THANKS A LOT FOR YOUR HELP ❤
Thats awesome! Glad to help!
I don't think it's my belt because It agitates when it's washing. It's filled with water so I'm going to have to manually get the water out first. I already checked the tube in the top where the water level thingies at.
7/5/2024. I was washing my blanket like normal and i noticed when it was in drain/spin mode it was shaking extremely bad. Well i put it in manual drain mode and it drained perfectly, then tried again now its not draining. I did hear a LOUD!!! POP! But now its full of water so ill have to drain it by hand or pump.
Thanks for this video! Very helpful!
Glad to help!
👍
The water is not going through the machine do you think it has something to do with the lid
Thanks bud
No problem!
What size bolt and how do you get bolt out
Mine fills and wash then drains. Any ideas
We literally just bought this brand today brand new and hooked it all up but when we turned in on, its leaking from underneath but it not coming from the pump. I'm lost now.
Definitely take that back to the store!
I’m trying one of your repairs on my washer - but- how do you completely drain the washer before you tip it on its back??
Multiple methods: Trying pulling the drain hose out of the standpipe and and into a bucket on the ground, if that doesn't work try to get as much water out by manually emptying it, and lastly harbor freight sells a $15 transfer pump that works great!
I have a washing machine that needs a new transmission and I would like you to do the repair how do I reach you? I am in California
Anyone knows how to remove the agitator so I can was the scrud out of it?
There's a bolt in the middle of the agitator you're going to need a really long tool to get it out. I had to replace my agitator because it was stripped on the bottom.
I have the same one. My work clothes got stuck before the drain and spin cycle. It clicks about five six times and also doesn’t lock now. I have no clue what to do.
Sounds like a bad lid lock mechanism
Why is the drive belt on my GE washing machine keeps on breaking
Does it keep slipping off or actually breaking?
No it does not
just keeps on breaking every so often
The water is constantly flowing even my washer isn’t running any help?
Sounds like bad inlet valves
My washer leaks and I can't figure out where it's coming from
What if a bunch of water comes out after removing the hose but there is nothing in the hose clogging it?
Most likely bad drain pump
Nit filling or spinning but belt is fine
There was a sock in there but now it’s just humming when I plug it in
Let it hum for a couple of minutes. Sometimes, these washers go into flood mode. If the humming doesn't stop after 5 minutes, then it is possible the sock burned the pump.
@@DuctTapeMechanic fixed thanks to this video !!!
@@thevogens awesome to hear!
I have Hotpoint washer just like that stuck on soak mode
Did you get a respons on your washer
i think you may have forgotten that the lid lock may also be a problem
7/5/2024. I was washing my blanket like normal and i noticed when it was in drain/spin mode it was shaking extremely bad. Well i put it in manual drain mode and it drained perfectly, then tried again now its not draining. I did hear a LOUD!!! POP! But now its full of water so ill have to drain it by hand or pump.