Luckfox PPPwn jailbreak PS4 reset luckfox to default
Vložit
- čas přidán 8. 09. 2024
- Luckfox PPPwn jailbreak Reset Luckfox internal memory
Reset your luckfox to default
0x1iii1ii / PPPwn-Luckfox
github.com/0x1...
SocToolKit.zip
drive.google.c...
If no response in connection u may need a driver
Open the RK Driver Assistant and install the USB driver. No need to connect anything during this process. Restart your computer after the installation is complete.
files.luckfox....
image flash
drive.google.c...
SHARE WITH ME \ FIRMWARE \BUILDROOT
luckfox_pico_plus_FLASH.zip RV1103
Luckfox_Pico_Pro_Max_Flash.zip RV1106
Offical guide from luckfox reset
wiki.luckfox.c...
You can find it at printed at back or
the chipset will show RV1106 / RV1103
Before connect to PC
press and hold the boot button connect to PC
When success flash the board will flash red LED
Got it to work after installing Rockchip Driver Assitant 5.1.1 for windows
Same Here Ty
Cool.Thank you so much bro for video and link.
Always welcome
Hey bro I'm facing a problem when i try to re install these! It's says failed to install! Failed to install! I have tired to reset button! But still problem didn't Solved; please help me@@GameConsolefish
thank you a lot, it really helped me
You're welcome!
When i connect my luckfox pico pro/max to the computer it connects via ethernet for a while then it automatically disconnect , can you please help me ?
Remove the SD card / reflash the luckfox to default with usb connect to PC
So, I'm struggling get the pro-max to connect.
If I hold the boot while connect to the PC then release>
The PC makes the usual tone of a device connecting, but then when I open SocToolKit no usb device is shown next to USB in the menu>
Also no red light is flashing on the LuckFox Pro-MAX, but if I just plugin the device without pressing boot the red light flashes>
Tried different computers and different cables.
Any help would be great
Have you remove the SD card while press hold boot
Hello my friend, I have a problem with this piece. When I turn it on in the computer, it works and after a short while it turns off. What is the solution to this problem? And it does not recognize the soctoolkit application
I found the solution, you have to execute the steps before the time limit is less than 5 seconds to execute the task and the method worked for me. The method is very difficult, I practiced it to do it in the shortest possible time and it was completed successfully
Hey man, thanks for the tutorial. Unfortunately im still not able to reset my luckfox pico plus. I got couple of questions though if you dont mind.
- How long should we press and hold the boot button before connecting to PC? also My pico plus disconnects in about 20 seconds after connecting to PC
- When I open the rockchip toolkit, on the USB section it doesnt show Maskrom 373, its just blank and when I press Download, it only shows "No found any device".
What am i doing wrong here? Thanks in advance
Press and hold connect to PC then release I think at least 2 seconds. If it cannot show Maskrom 373 it cannot detect do your usb cable allow both data / power ? try this usb cable with a phone if it can show the photo album then data ok
@@GameConsolefish alright. I'll try that and feedback later. Thank you so much for quick response!
man it worked! thank you so much!!!!
@@Lateralus800 I remember u cannot get connect luckfox to PC Can you tell me what have you done to success connect PC
@@Lateralus800 Please give me Comment、Like、Share