I just used the torqx polisher with the C4 and P4 combo and my truck looks amazing ! I was scared because it’s a black paint but I followed the directions, did one panel at a time and it’s so much nicer. Highly recommend it
Im really in love with the products of chemical guys. Im from Pakistan. Managed to buy butter wet wax after searching products here for a long time. Keep it up!
Wow that’s amazing. I didn’t think you could accomplish what you set out to do, it you did. Thanks for explaining not just the process but the use and benefits of the products used. I have come to appreciate the labor and how intentional you have to be when you have a certain result you want. So good 😊.
It looks really improved but it might have been nice to see the problem areas after all was done in a dark room like you started instead of with the sun shining on it.
Hi, thanks for your video, it’s very informative but i have a couple of questions if you don’t mind? Q1, Did you condition the pad before or after applying C4/P4? Q2, How often should you condition the pad? Q3, Would the 5 drops be enough to cover the whole hood or roof panels or would you do half a panel at a time? Q4, Did you condition the applicator for the Hydroslick?
The VSS and torqx polisher upped the trade in value of my truck by 1k after I was unhappy with the first offer they made, now my new truck is a chemical guys use only truck, traded out my mothers and all that and bought everything I need to do it myself with chemical guys, even sprung for the pressure washer foam cannon
I know this videos 2yrs old… But this is the first time that a company has explained the point of clay bar usage to a point that I truly understand why it’s important and think… “Oh that’s why you should clay bar!!” 🤯🤦♂️ Makes so much sense now, when you think of paint as ‘pores in skin’ and that you need to remove these contaminants before you compound and polish. If you don’t mind me asking… Why would you not just use the ‘heavy’ clay bar regardless, instead of the medium or light? 🤷♂️
Would this be a good attack plan for waterspouts also . I used your heavy duty water spot remover and had some success but the polisher must be brought to bear
Good morning guys I appreciate for this video amazing project you guys using it and professional job the way you doing it and I want to thank you very much for all this information and you have a nice day sir I appreciate it
Happy detailing! You can check your out our products on our website or at your local Detail Garage. www.chemicalguys.com/storelocator?showMap=true&horizontalView=true&isForm=true
@@ChemicalGuys thanks I recently got a bottle and was wondering about that for the fuel tanks of my semi, thanks for the response 🤙 I asked your customer service and no word yet after 3 days.. This is a way faster response lol
@@ChemicalGuys you guy rarely used/showed wipe out on your videos, but as I suspected you did use it, it's clear now.. many thanks, luv your products 😊.
Hi Darryl! Check out the TORQ 10FX Polisher. www.chemicalguys.com/torq-10fx-random-orbital-polisher-kit-10-items/BUF_501X.html?gtmListValue=Internal%20Search
I just used the torqx polisher with the C4 and P4 combo and my truck looks amazing ! I was scared because it’s a black paint but I followed the directions, did one panel at a time and it’s so much nicer. Highly recommend it
Happy detailing!
I just began using this line of products and I have instantly fell in love with all you supply.
Welcome to the Chemical Guys family!!
Im really in love with the products of chemical guys. Im from Pakistan. Managed to buy butter wet wax after searching products here for a long time. Keep it up!
Greetings from Southern California! Thanks so much for being part of the Chemical Guys family!
Just detailed a black 2020 Audi with near identical stain on the hood. Used both C4 and P4 with amazing results. Thanks guys!
Enjoy your detailing products!!
Wow that’s amazing. I didn’t think you could accomplish what you set out to do, it you did. Thanks for explaining not just the process but the use and benefits of the products used. I have come to appreciate the labor and how intentional you have to be when you have a certain result you want. So good 😊.
Thanks for watching!!
I found this very helpful having zero experience detailing.
It looks really improved but it might have been nice to see the problem areas after all was done in a dark room like you started instead of with the sun shining on it.
Thanks so much for your feedback!
Hi, thanks for your video, it’s very informative but i have a couple of questions if you don’t mind?
Q1, Did you condition the pad before or after applying C4/P4?
Q2, How often should you condition the pad?
Q3, Would the 5 drops be enough to cover the whole hood or roof panels or would you do half a panel at a time?
Q4, Did you condition the applicator for the Hydroslick?
The VSS and torqx polisher upped the trade in value of my truck by 1k after I was unhappy with the first offer they made, now my new truck is a chemical guys use only truck, traded out my mothers and all that and bought everything I need to do it myself with chemical guys, even sprung for the pressure washer foam cannon
Thanks so much for being part of the Chemical Guys family!!
Great job and fantastic results. Well done!
Glad you enjoyed the video!!
what an amazing transformation
Glad you enjoyed it!
fantastic result. well done you both !! as you said the wheels just popped ....
Thanks for watching!
The end result is superb! Appreciate the videos you guys make, thanks for all the hard work.
Thanks so much for watching!
I know this videos 2yrs old…
But this is the first time that a company has explained the point of clay bar usage to a point that I truly understand why it’s important and think…
“Oh that’s why you should clay bar!!” 🤯🤦♂️
Makes so much sense now, when you think of paint as ‘pores in skin’ and that you need to remove these contaminants before you compound and polish.
If you don’t mind me asking…
Why would you not just use the ‘heavy’ clay bar regardless, instead of the medium or light? 🤷♂️
Love using this product and love you guys are now in many stores now.
Thanks so much for being part of the Chemical Guys family!
Would this be a good attack plan for waterspouts also . I used your heavy duty water spot remover and had some success but the polisher must be brought to bear
Absolutely, this is perfect for removing stubborn stains.
I have a massive etched stain on the plastic trim on my door panel. Will this work ?
Thank you for these videos and your products are amazing and worth it I have the detailing kit haven't looked back.
Enjoy your detailing products!!
Will the cutting and polishing pads do the whole vehicle or will they need to be cleaned or changed?
Hey Keith! It is possible that the pad will need to be cleaned or replaced during the job.
@Chemical Guys I’m curious as to why you chose to use the 10FX over the 15D. I ask only because I’m trying to understand. Thanks.
Both would be a great choice for this application!
Awesome job. Can similar results be achieved by hand application and some elbow grease?
Hey! Machine polishing will achieve a better finish but you can still get results by hand.
Hey what water ratio in the spray bottle do you mix with the clay luber?
Hey! Clay Luber is ready to use, so there is no need for dilution.
Good morning guys I appreciate for this video amazing project you guys using it and professional job the way you doing it and I want to thank you very much for all this information and you have a nice day sir I appreciate it
Thanks so much for watching!
Awesome job
Happy detailing!
Thanks for the video guys!
Glad you enjoyed the video!
does clay bar remove car wax?
Hi there! Clay bar does not remove coatings. Use a surface cleanser such as Clean Slate to remove old coats of wax.
I have 3 small spots from bird poo stuck in my clear coat , am I get away with just doing the spots or do I have to do the hole vehicle ?
Hey! It is perfectly fine to polish away the stains and then blend the surrounding area.
How do you get under door handle? I've got spiderweb scratches and can never get that area look any better!
Hi Lorraine! For tight areas where a machine won't fit, use a hand polishing pad.
czcams.com/video/7hM5uXBxKfA/video.html
@@ChemicalGuys thank you for the how to video!
Wow !! just a transformation very impressive !
Question all your products is on your website.
Happy detailing! You can check your out our products on our website or at your local Detail Garage.
www.chemicalguys.com/storelocator?showMap=true&horizontalView=true&isForm=true
@@ChemicalGuys perfect thank you !
I have a 2005 mustang gt with ford screaming yellow with the LeMans stripes now when I go to clay bar my car will that affect the stripes
Hey Michael! As long as the stripes are gloss finish it is perfectly fine to lightly clay bar them.
Great job guys !!
Happy detailing!
Amazing! So there's hope for my car then, I have only a couple poop etches 🤣
Thanks for watching!
I want the FJ in the background.
Hey Jim! Check out this video.
czcams.com/video/7uq1Nxo7ZEA/video.html
Saludos desde Puerto Rico exelente trabajo
Happy detailing!
Wondering if hydro slick can be put on polished aluminum tanks ?
Hey! HydroSlick can be applied to any surface that is gloss painted, shiny or clear.
@@ChemicalGuys thanks I recently got a bottle and was wondering about that for the fuel tanks of my semi, thanks for the response 🤙 I asked your customer service and no word yet after 3 days.. This is a way faster response lol
Great job Guys.
Happy detailing!
Guys, i am always wondering. what product did you guys used before applying any sealants or hydroslick? wipeout or something else?
Hi there! Yes, use Wipe Out to ensure the surface is totally clean before applying any type of coatings.
@@ChemicalGuys you guy rarely used/showed wipe out on your videos, but as I suspected you did use it, it's clear now.. many thanks, luv your products 😊.
A year or longer than a year receiving droppings WOW..!
Thanks so much for tuning in!
What do I have to do before applying ceramic coating after using P4 ?
Hey! Use Wipe Out to thoroughly cleanse the surface before applying ceramic.
Hello guys. Amazing vid. I just wanna ask if you can ship your product to south east asia like Philippines if I order? Thanks guys more power.
Greetings from Southern California! Please search your local listings to locate an authorized distributor in your region.
Where do we buy these products?
I have a polisher but I need everything else.
Hi there! Check out our website or your local Detail Garage.
www.chemicalguys.com/storelocator?showMap=true&horizontalView=true&isForm=true
What setting I should use c4 & p4 on my Torq10fx??
Hi Noel! Use the lowest speed setting to spread the product out before bumping it up the highest speed setting to diminish C4 and P4.
Instead of using hydro slick, can I use jet seal?
Absolutely!
What kind of buffing machines are you guys using?
Hi Darryl! Check out the TORQ 10FX Polisher.
www.chemicalguys.com/torq-10fx-random-orbital-polisher-kit-10-items/BUF_501X.html?gtmListValue=Internal%20Search
Great products I have a 2015 Chevy Impala people think it's a 2019 looks Brad New
Glad to have you as part of the Chemical Guys family!
Mazda paint now looking how it was meant to look.
Thanks for tuning in!!
What product can I use to remove polish residue?
Hey! Use Wipe Out to remove residue.
Do you use a rotary machine?
Absolutely! It is perfectly fine to use a rotary polisher or dual action polisher.
Would V32 have worked?
Hi! V32 is a great option for remove deep imperfections.
Please video close the bird dropping
After detail job
Thanks so much for your feedback!!
Watching Yall Work,, Not Me !! Lol
Thanks so much for tuning in!!
Just watched a guy do it with just a heat gun in 10 minutes.
1st from 🇲🇾
Thanks for watching!
@@ChemicalGuys youre welcome 😁
I love you
😃😃
Dude, a bird shit on my car and in only 3 hours or so it etched my paint. I got it off with a little polish but damn. fuck bird shit
😮 Keep a microfiber towel and bottle of Swift Wipe in your car to quickly remove messes.
Really good job I really like your wax. We should talk
Thanks for watching!!
First from Fresno
Happy detailing!!
1st
Thanks for being part of the Chemical Guys family!
@@ChemicalGuys always 😀