G660 Pro In Red Oak Best Holzfforma Chainsaw ?

Sdílet
Vložit
  • čas přidán 22. 12. 2023
  • Here we put the Holzfforma g660 pro to the test cutting big logs and firewood. It is a gas guzzler for sure but stayed together.
    Welcome to Man Time!
  • Jak na to + styl

Komentáře • 21

  • @mlyniecm
    @mlyniecm Před 3 měsíci +3

    One of the only videos of this saw going through real hardwood and tuned properly. Thank you sir

  • @craigunderwood4353
    @craigunderwood4353 Před 3 měsíci +1

    That's one off the biggest red oak I've every seen! I thought the one in my yard was big, that makes it look like a baby!

  • @hillbilly4christ638
    @hillbilly4christ638 Před 3 měsíci +1

    Chaps are a good idea with a long chain like that. I don’t like wearing them unless I run into using a big saw like this. Nice saw! It is really throwing some nice rooster tails. I carry a small bucking wedge and an axe when I cut like this.

    • @Man-Time
      @Man-Time  Před 3 měsíci

      Chaps are always a good idea no doubt.

  • @namelessxyz5218
    @namelessxyz5218 Před 3 měsíci +1

    Nice video and beautiful, big tree! I have a G660 Pro as well. Nice saw to play with and do some mods 😉 stay safe and get the gullet

    • @Man-Time
      @Man-Time  Před 3 měsíci

      Thanks Man! I’m happy with the saw so far. Nice to have some big wood to test it with

  • @diggindiggenit6540
    @diggindiggenit6540 Před 5 měsíci +2

    Yeah the saw is quite impressive did you sharpen the stock chain or change it? It was digging real good, If I had a tree that large and was about to mill some I would be tempted in a three inch thick piece bye ten foot just for a dinner table if the wood is solid, that way you will have a constant memory and talk piece down the road when your eating on it. have fun just subscribed tonight looks like you have great content.

    • @Man-Time
      @Man-Time  Před 5 měsíci +2

      I did sharpen the chain. And yes I think I’ll be making some thicker slabs. Welcome to Man Time!

  • @richarddodds9326
    @richarddodds9326 Před 5 měsíci +2

    I got the orange neotec, don't pinch the chain on top that thing kicks like a mule

    • @Man-Time
      @Man-Time  Před 5 měsíci

      I’ll keep an eye on the tip. Always do👍

  • @Ttow49
    @Ttow49 Před 5 měsíci

    I ordered one with a 28" light bar, I wonder if it can be used as a all around saw for limbing also occasionally?

    • @Man-Time
      @Man-Time  Před 5 měsíci

      I’m sure you can. I wouldn’t want to. Weight matters

    • @Ttow49
      @Ttow49 Před 5 měsíci +1

      I just ordered the g111 also, might be a little easier lol thank you

    • @hillbilly4christ638
      @hillbilly4christ638 Před 3 měsíci

      Get a smaller saw for limbing. A big saw will wear you out. You do not want to get fatigued with a big saw in your hands. Honestly, a small saw with a 16 or 18” bar will get the majority of the work done. You should only lean on a big saw for felling and cross-cutting the big stuff. I have a lot of different saws for different tasks, so use the right tool for the job and don’t try to get one saw to do it all.

  • @jermaineglover4043
    @jermaineglover4043 Před 3 měsíci

    What size bar is on it?

  • @Ttow49
    @Ttow49 Před 5 měsíci

    Is it really 21 lbs? Thats what it says online at website

    • @Man-Time
      @Man-Time  Před 5 měsíci +3

      Mine is 26.5lbs in the fighting trim shown. 36”bar

  • @user-qp9ct8lb6w
    @user-qp9ct8lb6w Před 5 měsíci +1

    Привет

  • @user-qp9ct8lb6w
    @user-qp9ct8lb6w Před 5 měsíci

    Чаинсав 660,444,111 гуд веригуд