Cloning RF Hack Alarm Motor - ESP32 + CC1101 - Part#3
Vložit
- čas přidán 7. 09. 2024
- Upload OTA & Firmware Hack RF
EDUCATIONAL ONLY !!!! LEGAL USE ONLY !!!
Hacking RF multi frequency using ESP32 and CC1101 module.
File PCB cetak ada di vidio Part#2, yang belum nonton Part#2 silahkan tonton dulu
Kelengkapan Source code Part#3:
www.mediafire....
/* CC1101 Pins
int sck = 18;
int miso = 19;
int mosi = 23;
int csn = 27;
int gdo0 = 25;
int gdo2 = 26;
*/
//Pushbutton Pins
Tombol 1
kaki resistor 10K = GND dan D34, Switch push button = D34 dan VIN
int push1 = 34;
Tombol 2
kaki resistor 10K = GND dan D35, Switch push button = D35 dan VIN
int push2 = 35;
Salam,
Work from home 2021 2022
Tag:
esp32
esp8266
rf hack tool
hackrf
rf hacking device
hack rf remote control
hackrfcar
hackrf esp32
hackrf arduino
rolljam
hackrolljam
cloningrf
rfcloning
hackrf rolljam
rf
cloning
jamming
jam
Perfect video. Please make Full Video about this Roll Jam and please add more codes to make memory to save frequency to ESP32 or something else :D
Noted
Hello, please help me, I want to put the code in esp32, it gives this error (esp_int_wdt.h)🙏🙏
next fotoin belakang pcb nya om...mau liat alur soldernya gimana
Siap om
Hello Mr.Please please help me. I have connected all components using jumper wires and bread board with esp32, but when I upload .bin file to esp32 (using web server) is looking good. Shows 100% = uploaded) but somethink is wrong but I DONT KNOW WHAT. PLEASE HELP ME IF YOU HAVE TIME :D
does this works with like car keys?
This works for car key, but you will need jammer as car key system is rolling code.
Merci pour le tutoriel il est excellent.
Malheureusement pour moi il ne fonctionne que sur une seule modulation ask en 433
La télécommande de ma chambre est en fsk en changeant la.modulation elle ne fonctionne pas.
Peux-tu me corriger le code pour le 433 mhz en fsk?
Merci d avance.
i will try this my friend , the rolljam project is not working i tried a thousand times but in this i can change the frequency brother from 315 to 433
Does it work using ESP32 ?
@@WorkFromHome-th2eq I have not tried with esp 32 you told me you can do it with arduino nano?? but sorry can you tell me if it works or not otherwise I don't spend any more money unnecessarily buying components, brot ??????
@@juanbcn4809 it is different project bro this one is only working with ESP 32.
The previous rolljam project is using Arduino nano. I am just curious to know why it doesn't work for you while I am working fine my bro.
@@WorkFromHome-th2eq yes brother I understand
Brw pls make this rolljam design in bread board pls
hello tnx for this project . i have problem with fsk modulation when change it in the script i get the tool restart any solution
does ASK/OOK work well? if it works. Did you change like this ?
float frequency = 433.00 or any freq.
int mod = 0;
float rxbw = 812.50;
float datarate = 5;
float deviation = 47.6;
ssd1306 Oled dont show anything bro. I connect esp32 pins ( 21 sda ) and ( 22 sck ) but dont shows any thing .. what should ı do. can you tell me how to. thanks bro
Have you tried reversing between 21 and 22? Or make sure your OLED is ok.
@@WorkFromHome-th2eq my oled is ok. ı have tested yes ı did reverseing still dont works
Oled display only two connection are there but gnd and scl. Where
GND to GND vcc to 5v
@@WorkFromHome-th2eqSDA sama SCL nya kepin mana?
Bang, izin bertanya jalur resistor dari mana ke mana dan fungsi dari resistor untuk apa?, terima kasih
Jalurnya satu kaki ke GND satunya ke D34 (Button 1), button 2 GND ke D35, masing masing dari D34 / D35 konek ke 5V
Can you have the gaber file of the PCB, thanks
I think I have had put it in my github
@@WorkFromHome-th2eq IO433 Board?
Bang ini yg cc1011 pin nya di sesuaikan lagi sama yg di deskripsi ga? Sama push button nya jadi d34 ga?
Kl pakai pcb cetak cc1101 hrs sama bang susunan pin nya kl pakai pcb zero bisa pakai cc1101 yg berbeda tinggal sesuaikan pin nya yg ada dideskripsi .. sama juga utk push buttonnya
@@WorkFromHome-th2eq pcb cetak sama pcb zero bedanya apa bang?
@@WorkFromHome-th2eq oh i see i see ,kalau pake pcb bolong bolong bisa di sesuaikan cc1101 nya ya ,kalau pake pcb cetak harus sesuai ,kurleb gitu ya bang?
there is no ip adress on serial monitor only dots keeps going ? why
You should change the ssid and password in the script to your home wifi connection. After that try to re upload, when finish press the reset button on esp32
@@WorkFromHome-th2eq ok thanks for quick answer but ı have no witi ethernet cable I use. so what should ı do
@@cemtanca2286 I think you should use/buy router for a wifi connection otherwise you can not upload over the air (OTA) then. However, you still can upload using cable as usual.
Mantap
Brw I want circuit diagram plz
See description
Cetak pcb nya dmn bang?ada Facebook?atau sosmed lain?
Di spectra .. bandung czcams.com/video/uX1F6UcHsBY/video.html
@@WorkFromHome-th2eq ada sosmed nya ga bang? Mau tanya tanya aku
👍🇧🇷🚶➡️👏👍🚶➡️🇧🇷
itu power positif nyambung ke mana?
5v
saya ada esp32u, udh include sama antena, code program nya apakah sama bang?
@@WorkFromHome-th2eqoutput 5v nya ke mana bang?
@@memesedikitreceh harusnya sama krn ini juga esp32
@@memesedikitrecehkl untuk CC1101 positif nya ke 3.3v
Mau tanya bang ,modul cc1101 nya yang mana ya? Atau bisa kasih link nya?
Yang Warna Hijau bang ada tulisan D Sun. Coba di cek di part 1 ada ulasannya
@@WorkFromHome-th2eq kalau link pembelian nya ada bang?
@@ninjaheroes5624 gag bisa taro link bang dihapus youtube
Bang izin bertanya kalo upload pakai kabel apa bisa?
Bisa bang .. seperti upload biasa aja.
Apa harus menginstal library seperti lcd OLED, modul 433MHz, dan lain lainy?
@@handiswardana9839 iya bang kl enggak nanti error .. pas upload
Assalamualaikum Bang bisa minta schematicnya
Walaikumsallam .. ada di deskripsi bang utk rangkaiannya
Coba ah
Hello again Sorry for the interruption. Could you help me please with scanning frequencies. I need save all captured frequencies to SD Card and when this frequencies is saved (with giving some names) again it reuse or reuse it AFTER turning off esp32 module BUT WITH SAVED into file or something like this. Can you help me please with programing all code ? Or can you make full video about saving frequencies to SD Card and reuse them for future roll jam.
Thank you for your willingness :D
Still find a time to focus on this. I kind a busy with the office works 😀
@@WorkFromHome-th2eq ok.
showing on my Oled display NOTHINK.
Can I use ESP8266 for this ?
No. If you want to use esp8266 please see my other video
@@WorkFromHome-th2eq Can you share link please ?
@@tonkofonko czcams.com/video/DPymwGg7Y0M/video.html