Put those bushings in the freezer for a few hours and then put them in immediately after. The cold will shrink them down and make it a lot easier. Put some bushing lubricant on it right before you install them that will help too. Gotta get you a camera with a tripod mount!
Oh I figured out, I put the sand dark in the cavity after I put a rag in the bottom hole, and pulled the coupling off ,and then rotated the hub arounf to the top, ,and one by one pushed them in the holes, then retread the left haded coupling on and then pull the rag out of the hole at the bottom,that drained the sand ,then I poked a hole in a bottle of water ,and squirted it down on the area to wash out the sand lol it is 100% installed now, next is get spark, it’s has no spark right now, ,it has power to the coil ,but not the plug’s, I’ll be checking the coil and breaker point’s, I need to figuout how to test the coil, I don’t know if it 12voltor6 volt, ? Thanks BigAl California.
Put those bushings in the freezer for a few hours and then put them in immediately after. The cold will shrink them down and make it a lot easier. Put some bushing lubricant on it right before you install them that will help too. Gotta get you a camera with a tripod mount!
Oh I figured out, I put the sand dark in the cavity after I put a rag in the bottom hole, and pulled the coupling off ,and then rotated the hub arounf to the top, ,and one by one pushed them in the holes, then retread the left haded coupling on and then pull the rag out of the hole at the bottom,that drained the sand ,then I poked a hole in a bottle of water ,and squirted it down on the area to wash out the sand lol it is 100% installed now, next is get spark, it’s has no spark right now, ,it has power to the coil ,but not the plug’s, I’ll be checking the coil and breaker point’s, I need to figuout how to test the coil, I don’t know if it 12voltor6 volt, ? Thanks BigAl California.