Is there anyone online that I can pay to help config just to use the HT801 as a home phone. I have the dial tone and logged in with my IP address but trouble configuring to use.
Here for the same issue. I have a SIP profile with 2 lines on it. I would like the HT802 to ring port 2 when port 1 is already on a call. Have you figured out if this is possible with the HT802?
I followed your instruction, but phone got disconnected after a few hours... After checking, I found "Registration expiring time" is in minutes, and 3600 means phone don't get reregister in 60 hours... This is causing it deregister! Please correct it, it should keep the default value of "60"
provisioning server is when the device pulls configurations from Phone Power server. Configuration server are the settings you put in the device when you hand configure it. Provisioning is done automatically when you connect the device.
First - Factory reset the device. Then enter the ip address of the device in your browser. If you still cannot access the device. Enter ***12 then 9#. If the device requests a password then it is locked and cannot be used with Phone Power.
Is this a free service, I already have a fongo number that i use in my iphone. Can i buy this adapter and use that phone number to pair with the HT802 and can i make free local calls. I dont want to give a montly fee. So please let me know
Hi Richard, I need a help to get in setup box. Looks like i need a master password. I tried to use admin admin, but its not working. I tried admin 123456, not working ether. box was set up by somebody else. and i need to go inside ... How ?
If the device is new or has been factory reset the log in information is admin. If you cannot log into the device after factory reset the device may be locked to another company. After factory reset the login is admin as the video states.
You need to be using the grandstream device - There is no such password as 123456. If you factory reset device the log in will be admin and nothing else.
Hey Richard, I got up to the website part, but I can’t get passed the part where you said, “put in the dns server and press apply”. I press apply and it didn’t do anything for me. What’s the dns server?
DNS server is what the internet converts words like www.google.com into an ip address so it can be routed on the internet. You can use 8.8.8.8 as a DNS server. Which is Google's DNS server
Looks like not. Research shows it is SIP and apparently only the obihai brands (obi200 etc) work with google voice as stand alone. Others can work with a paid service used as proxy but that defeats most of the purpose. So I went with a used obi200 for $38 on ebay.
Thank you for this video
it works, thank you for the advice
Where do I get the SIP information from?
Is there anyone online that I can pay to help config just to use the HT801 as a home phone. I have the dial tone and logged in with my IP address but trouble configuring to use.
Hello thnks for the video if i have a réception phone infuse the cfg like u did??
Hi, Richard grate video! Isn't the HT802 a two port device? Can a HT802 be used as a two line HUNT Group set to Linear?
Here for the same issue. I have a SIP profile with 2 lines on it. I would like the HT802 to ring port 2 when port 1 is already on a call. Have you figured out if this is possible with the HT802?
I followed your instruction, but phone got disconnected after a few hours... After checking, I found "Registration expiring time" is in minutes, and 3600 means phone don't get reregister in 60 hours... This is causing it deregister! Please correct it, it should keep the default value of "60"
You need to contact phone power tech support for further help
I am confused trying to understand difference between provisioning server and configuration server.
provisioning server is when the device pulls configurations from Phone Power server. Configuration server are the settings you put in the device when you hand configure it. Provisioning is done automatically when you connect the device.
Hi, I just can't go further the first step. I entered the ip on the web browser, but the deley is past and I can't connect or configure anything
First - Factory reset the device. Then enter the ip address of the device in your browser. If you still cannot access the device. Enter ***12 then 9#. If the device requests a password then it is locked and cannot be used with Phone Power.
Is this a free service, I already have a fongo number that i use in my iphone. Can i buy this adapter and use that phone number to pair with the HT802 and can i make free local calls. I dont want to give a montly fee. So please let me know
These instructions are ONLY for Phone Power customers with an active account. Not a free service.
@@richardburnam3036 hi Richard,
I will get the adapter but do I need to pay a monthly fee for it??
If you use Phone Power service then Yes. If you use Google Voice then no. However the instructions in this video will not work with Google Voice.
Hi Richard,
I need a help to get in setup box.
Looks like i need a master password.
I tried to use admin admin,
but its not working.
I tried admin 123456,
not working ether.
box was set up by somebody else.
and i need to go inside ...
How ?
If the device is new or has been factory reset the log in information is admin. If you cannot log into the device after factory reset the device may be locked to another company. After factory reset the login is admin as the video states.
You need to be using the grandstream device - There is no such password as 123456. If you factory reset device the log in will be admin and nothing else.
configure again ?
Hey Richard, I got up to the website part, but I can’t get passed the part where you said, “put in the dns server and press apply”. I press apply and it didn’t do anything for me. What’s the dns server?
DNS server is what the internet converts words like www.google.com into an ip address so it can be routed on the internet. You can use 8.8.8.8 as a DNS server. Which is Google's DNS server
VOIP FTW
How do i find the DNS server?
A common DNS server would be Google - 8.8.8.8 and/or 8.8.4.4
My question is if this works with google voice.
Looks like not. Research shows it is SIP and apparently only the obihai brands (obi200 etc) work with google voice as stand alone. Others can work with a paid service used as proxy but that defeats most of the purpose. So I went with a used obi200 for $38 on ebay.
still having a problem
That means nothing. What problems are you having?