RC Drift Car | Build Progress | RC Reverse Issue | Yokomo RD 1.0 | Onisiki Motor & Servo
Vložit
- čas přidán 19. 07. 2023
- Hey RC Headz!
Welcome to the channel. In todays video I will be showing you all my reverse issue. After a few minutes of running, the reverse will stop functioning. If you guys have any tips or tricks please let me know.
This is one of many RC car vlogs I plan on uploading more content throughout this journey.
Merchandise COMING SOON
COMING TO A @ScaleScience NEAR YOU
SUBSCRIBE SUBSCRIBE SUBSCRIBE
#rccar #rccars #rcdrift #rcdrifting #beginners #beginner #rcdriftcar #yokomo #onisiki #hobbytown #carmeet #carenthusiast #rcbuild #driftcar #drift - Auta a dopravní prostředky
UPDATE: I used the Yokomo programming card to turn off the braking feature on the ESC. Now it goes into reverse with no lag or issue.
You will get to a point where you are gonna want the reverse delay. It’s gonna be critical for driving with other people and following correctly. You should be able to change the reverse delay without turning it off completely though
It’s most likely going to be either you accidentally clicked the esc and it went into a different program or it’s stuck in a program! It’s an easy ic you just need your manual ! It should explain on there!
Disable coast if you have it on esc, that was issue for me when it was hard to reverse :)
Try switching two of the three wires from the motor to the esc I had the same problem and it worked hope the info helps
Thank you 🙏🏾 I will try that method.
the main motor itself though .. check ita stator