I just applied Darkside. It was really easy! It filled in all the little grooves in one pass! A little on the satin/gloss side. It has become my new go-to. It looks good!!!
I used it for the first time this morning. Rubbed it in well, let it set for 10 minutes, buffed the tire to remove any excess, two hours later it has totally dried, with a beautiful matte sheen. Love it.
Thanks Corey. Agree that 6 weeks is about right for a daily driver. My testing has also leaned to 6 weeks for a daily driver which is just fine. It does leave a nice finish. Beard is looking on point.
@@MikeGDetailing I knew that already. Should’ve said consumer lol. Either way I believe it’s going to be a big game changer if it fulfills what they say about it.
Thanks Rob! I'm sure the PERL won't go to waste! It is phenomenal on a variety of surfaces. But if you want to exchange it just hit us at service@carpro-us.com
I would recommend PERL if you want a dark look that lasts 2+ weeks. PERFECT for that - Dilute it 1:1 on tires. And you can add even more gloss if you layer it.
Talking only Carpro lineup; What to use for maintaining a blackout coat? What to use for maintaining dlux coat on rims/plastic? What to use for maintainance wash for rims? Will a dlux coat on rims/blackout coat on tyres never fade (like a coat on paint needs polishing to remove the coating)?
Hi Rick, great question - There is no need to apply Release on top of DarkSide. You could do so if you wanted but it will not aid in its durability. Darkside is going to do well on its own as long as it has a few hours to cure (preferably 12 if possible). I suppose if you had to release it after 4 hours into the rain the release gently applied couldn't hurt.
@@SkyCarCare Hey thanks for the reply ! Layering maybe was not the word to use. I was more talking about the 4 hours drying time window and after. But like you said, probably (if not definitely) won’t hurt 👍🏼 Cheers ! 🇨🇦
I have this on order... 6 weeks would be fine...I just dont want it to wash away instantly...I love pearl but one rain cloud and it's gone... I'm exaggerating but....
Hi Alan, great question! Since the 500ml and 1 Liter bottle are 2 different heights they have to be trimmed to match the bottle. So, just place the nozzle vertical next to the bottle and mark a line about 1/2" longer than the bottle and then slice it at a slight angle with shear scissors or box cutter and your all set!
I washed my tires, 5 years old, never cleaned before. I used foam canon with Carpro Descale, and iron remover. Unfortunately, it dried up. A white haze appeared on rubber that was very difficult to remove. After 30 minutes I only removed about 80% of it. It does not come off with Descale, Lift, IPA, Trix or car shampoo. 1. Why did it appear? 2. What’s the best way to remove it except Carpro Retyre? On another note, how to remove old Turtle FlexWax from intricate rims? Descale and Lift did not kill it.
Hi, 1. - It appeared for one or more of the following reasons. Because it was allowed to dry on the surface, because those products are not made for tires, because it reacted with whatever is built up on the tires, and I am going to assume you may have done it in the sun or on a hot surface. You never want to use cleaners on a warm surface or in the sun. 2. - Retyre is for cleaning tires and will work better than anything else. Beyond that, some all purpose cleaners may work ok with good scrubbing. 3. - Its critical to AVOID getting stuff like that on rims and paint etc. Once on there it is difficult to remove once hardened. Try alcohol, try CARPRO Inside... if neither work then an abrasive polish like CARPRO Reflect will remove it.
You do not have to throw it out. You may not get all the sealant out with a wash of applicator but it doesn't matter. Just clean as possible and fine to re-use as much as you like.
Hi can you tell me how to maintain darkside for regular wash ? I mean, for cquartz they need reset and elixir , but what about tire? , can i use a brush ? Or just let it be.
If you wash the car regularly and often then sometimes you can just rinse the Darkside off and then wipe but every two weeks just give it a quick wash with the car wash on the tires and rinse the soap back off. No need to use a brush, just a soft mitt or microfiber towel. If you use a tire cleaner chemical then it will start to affect the Darkside sooner and can remove it too soon so no tire cleaners until you are ready to re-apply or want to strip it well.
@@SkyCarCare I've tried several tyre sealants, with good looks, but not really durable. To my mind applying dark side and after 3-4 weeks some other dressing every now and then, looks good solution for durability, dirt repellency and more glossy look
You can use the brush to apply it instead or when wiping off excess just us a microfiber towel that will get in the grooves. One other option is a blower to blow it flat from the grooves while wiping.
Yes, although the fresher that Blackout is, the less durably that Darkside is going to stick to it. Also, wait at least a week to avoid the Darkside impairing the Blackout.
CARPRO intends DarkSide to be used on exterior rubbers, however... James applied some to his rubber vehicle floor mats for testing. It made it slightly slicker. As long as they are textured and offer decent grip that way, it will be ok. We would advise testing it to make sure you are happy with the feel before doing the entire mat.
@@craigandrews7544 Hmmm you know what. I do not think we did! I will check with the guys since my memory is so bad but if not we will add it to the list. Best, Corey
Is this water based/soluble like PERL ? I used PERL diluted 50:50 and works better than neat. Or solvent /petroleum based ? On a sidenote : I hate the short tirewall tires ...
Anytime I purchase this on Amazon it comes with a dispenser pump that is way too big for the 500mL bottle. Almost like they keep including the pump for the 1L bottle instead of the 500mL one. Also went through different sellers as well. Even noticed the product picture shows with a black pump instead of a clear one that I received and which this video shows. Anyone else notice this or if it’s intended?
Great question, it is intended. There is only one size nozzle and then if you have the 500ml size, you simply trim the bottom off with a knife or shears. Just hold it up to the bottle and then leave it slightly longer than you think.
@@SkyCarCare ahh k k, thanks for the update, makes sense I suppose after I ran into the same issue with multiple sellers. CarPro should probably change their product pictures to be a bit more accurate as others on Amazon are actually thinking its an issue as well. :)
@@mike33033 Hi Mike, CARPRO does not sell anything on Amazon. So, it is up to whoever the resellers that are re-selling on Amazon to provide accurate info and images. Its actually impossible to even know when a product from Amazon is genuine. I would recommend shopping from an established detail supply company like ours that you can trust or at the very least not following or trusting information on Amazon. I totally get how convenient they are but unfortunately they are not at all trustworthy.
@@SkyCarCare sounds good, thanks for the update! The main thing Amazon unfortunately has going for it is the free shipping if you have prime, it’s super hard for other sites to compete with that when the basic customer thinks its equivalent item right haha. :( But absolutely agree!!
@@mike33033 Sooooo true! Free shipping wihtou needing to spend 95$ and very fast and easy to search and order (amazing software) are their huge advantages.
Fair point that we have never really considered. I would imagine that the inside does not receive the same type of exposure as the outside of the tire does. Mainly looking at UV in that instance. But i would imaging the main reason people don't do this is the hassle of taking the tires off each time they want to apply. Plus even though Darkside does technically protect from the elements. Its main focus is to keep the tires clean for a better look.
I can tell you from experience, it is because they do not need any protection on the inside since it is not exposed to UV. My Saturn Sky sits only in the garage except for very few drives and the tires are from 2008 (almost 20 years old) and still look brand new although I have not dressed them in over a decade. -Corey
We would LOVE to know more about your experience because CARPRO DarkSide has become one of the most popular CARPRO products to date by how WELL it works. Im sure there has to be something causing you to have undesired results.
@@SkyCarCare I’m happy to share my experience. When I ordered the 16.9 ounce bottle, it came with a dispenser tube that was too long. No problem I thought. I’ll just trim the tube, only to find out that the dispenser itself didn’t work, which made it useless. I then poured some on an applicator, but the product is very slippery and slid out from my hand and spilled. At that point, I was done with it.
@@jdub1139 Thank you for sharing! So it sounds like you had a nozzle issue...not a CARPRO DarkSide Issue. The nozzles that CARPRO supplies come in one size that also fits their 1L bottles so the long nozzle makes sense and you were 100% correct in cutting it! It not dispensing is another concern. If you purchased the DarkSide from us, did you reach out to correct the dispenser issue? Our team would have sent you out a brand new immediately or tried to trouble shoot why it was not working with you via phone or email. Im really sorry that you were not able to give DarkSide a true chance. Im confident you would love it.
@@SkyCarCarewhat an idiot that guy was he obviously never used the product properly understandably because of nozzle reasons but he's going to give his negative comments that the product is junk. Unfuknbelievable 🤪👈
I just applied Darkside. It was really easy! It filled in all the little grooves in one pass! A little on the satin/gloss side. It has become my new go-to. It looks good!!!
I'm stoked your loving it Mike!
I used it for the first time this morning. Rubbed it in well, let it set for
10 minutes, buffed the tire to remove any excess, two hours later it
has totally dried, with a beautiful matte sheen. Love it.
Just got my bottle the other day. As soon as this front moves thru, truck will get a cleaning and application to the tires…👍👍👍
I can't wait to hear your thoughts!
Thanks Corey. Agree that 6 weeks is about right for a daily driver. My testing has also leaned to 6 weeks for a daily driver which is just fine. It does leave a nice finish. Beard is looking on point.
Hey hey! Awesome Mike! Love to hear when you find similar results!
Haha, thank you!
Merry Christmas Guys…. Looking forward to the new products
They are in stock and shipping! Merry Christmas to you too Brian!
Just saw this on Pan the organizer’s channel. I really love the line up. Also can’t wait to see the brand new ceramic coating!
DQuartz is an authorized installer only coating. You will have to wait a year for the consumer version from what my sources have told me.
@@MikeGDetailing I knew that already. Should’ve said consumer lol. Either way I believe it’s going to be a big game changer if it fulfills what they say about it.
Thanks!
@@steinerkevin3929 I would be curious if it would be as good as the Diamond ProTech coatings that are nano-diamond.
@@MikeGDetailing oooooooo yeah. I would love to do a test
6 weeks seems to be a sweet spot for durability on tire coatings/dressings...I'll definitely be checking this out
Very Interesting Video Corey! I am very excited about the new products. Unfortunately, they are not yet available in Germany... Best regards
Florian
Great to see you my friend! I hope you can get them pretty soon!
Warmest Regards,
Corey
Love your stuff guys, keep up the great work!!
Thank you my friend! Great to see you!
Very good information on that it’s just too bad I ordered pearl instead of getting a new one
Thanks Rob! I'm sure the PERL won't go to waste! It is phenomenal on a variety of surfaces. But if you want to exchange it just hit us at service@carpro-us.com
Great review, packed with all the info we want to hear, thank you. Subbed :)
Thank you Andrew!
-Corey
Great product, works great and smells delicious
Thank you! And we agree!
So my personal opinion is I would rather it last 2 weeks but look exactly like it does after it first dries until the very end.
I would recommend PERL if you want a dark look that lasts 2+ weeks. PERFECT for that - Dilute it 1:1 on tires. And you can add even more gloss if you layer it.
Talking only Carpro lineup; What to use for maintaining a blackout coat? What to use for maintaining dlux coat on rims/plastic? What to use for maintainance wash for rims? Will a dlux coat on rims/blackout coat on tyres never fade (like a coat on paint needs polishing to remove the coating)?
Great questions! Here goes:
Reload will work great
Reload also
Reset to wash
Eventually all will fade eventually.
Hope that helps! have a blessed day!
Nice video like always ! Is there anything said by Carpro about layering Release on top of DarkSide to protect the curing time against weather ?
Hi Rick, great question - There is no need to apply Release on top of DarkSide. You could do so if you wanted but it will not aid in its durability. Darkside is going to do well on its own as long as it has a few hours to cure (preferably 12 if possible). I suppose if you had to release it after 4 hours into the rain the release gently applied couldn't hurt.
@@SkyCarCare Hey thanks for the reply ! Layering maybe was not the word to use. I was more talking about the 4 hours drying time window and after. But like you said, probably (if not definitely) won’t hurt 👍🏼
Cheers ! 🇨🇦
Does a wheel cleaner like Brake Buster affect this product at all?
I have never used brake buster but the wheel cleaner I use (TUGA Devil Special Wheel Cleaner) did not damage it at all.
it’ll be alright
I have this on order... 6 weeks would be fine...I just dont want it to wash away instantly...I love pearl but one rain cloud and it's gone... I'm exaggerating but....
I get it! I think you will love this. Even after the darkness wears down it stays hydrophobic and clean for awhile.
Pretty impressive life.
Yes sir! Looking like its more consistently around 6 weeks with our weather but still great durability all things considered.
Why is the pick up tube that attaches to the sprayer soo long? Can't put sprayer on top of the bottle because tube is 2 inches too long
Hi Alan, great question! Since the 500ml and 1 Liter bottle are 2 different heights they have to be trimmed to match the bottle. So, just place the nozzle vertical next to the bottle and mark a line about 1/2" longer than the bottle and then slice it at a slight angle with shear scissors or box cutter and your all set!
@@SkyCarCarethank you.
Please link the Creeper you’re sitting on. Thanks.
Hi Luke, it is no longer made but there is one similar. Found at Uline.com
I washed my tires, 5 years old, never cleaned before.
I used foam canon with Carpro Descale, and iron remover. Unfortunately, it dried up. A white haze appeared on rubber that was very difficult to remove. After 30 minutes I only removed about 80% of it. It does not come off with Descale, Lift, IPA, Trix or car shampoo.
1. Why did it appear?
2. What’s the best way to remove it except Carpro Retyre?
On another note, how to remove old Turtle FlexWax from intricate rims? Descale and Lift did not kill it.
Hi,
1. - It appeared for one or more of the following reasons. Because it was allowed to dry on the surface, because those products are not made for tires, because it reacted with whatever is built up on the tires, and I am going to assume you may have done it in the sun or on a hot surface. You never want to use cleaners on a warm surface or in the sun.
2. - Retyre is for cleaning tires and will work better than anything else. Beyond that, some all purpose cleaners may work ok with good scrubbing.
3. - Its critical to AVOID getting stuff like that on rims and paint etc. Once on there it is difficult to remove once hardened. Try alcohol, try CARPRO Inside... if neither work then an abrasive polish like CARPRO Reflect will remove it.
@@SkyCarCare Thanks, I managed to clean it with lots more scrubbig and ReTyre. They look like new.
@@mateuszukasiak7675 Perfect!
I am about to go use this, however, can you wash out the applicator just
like any other tire dressing, or do you have to throw it out?
You do not have to throw it out. You may not get all the sealant out with a wash of applicator but it doesn't matter. Just clean as possible and fine to re-use as much as you like.
@@SkyCarCare Thank you
What is the best buy for tires? CARPRO DarkSide or Ultima Tire & Trim Guard Plus ???
For tires go with Darkside! For plastic trim Ultima is the GOAT
@@SkyCarCare Thks. I use for plastic - CARPRO PERL
Hi can you tell me how to maintain darkside for regular wash ?
I mean, for cquartz they need reset and elixir , but what about tire? , can i use a brush ? Or just let it be.
If you wash the car regularly and often then sometimes you can just rinse the Darkside off and then wipe but every two weeks just give it a quick wash with the car wash on the tires and rinse the soap back off. No need to use a brush, just a soft mitt or microfiber towel. If you use a tire cleaner chemical then it will start to affect the Darkside sooner and can remove it too soon so no tire cleaners until you are ready to re-apply or want to strip it well.
@@SkyCarCare You are only the one who can clear my doubt, Thanks alot!!
@@12tailOverly Thank you!!
Can you apply darkside on plastic trim as well?
Yes sir, absolutely
Can you top it with Perl or other water based dressing?
Yes but I would hold off until it fades a bit
@@SkyCarCare I've tried several tyre sealants, with good looks, but not really durable. To my mind applying dark side and after 3-4 weeks some other dressing every now and then, looks good solution for durability, dirt repellency and more glossy look
I completely agree!@@flowinthrou
Would you put this also on the rubber seals around doors, or use PERL on these??
Darkside is preferred over PERL for that.
How do I prevent sling? I waited 2 hours, wiped it down but I cannot wipe it from fine grooves.
You can use the brush to apply it instead or when wiping off excess just us a microfiber towel that will get in the grooves. One other option is a blower to blow it flat from the grooves while wiping.
Can it be applied as a topper for blackout
Yes, although the fresher that Blackout is, the less durably that Darkside is going to stick to it. Also, wait at least a week to avoid the Darkside impairing the Blackout.
@@SkyCarCare my blackout is currently going 2 months since application is it alright to be applied
@@millyharbinger8897 Yes, its ok :)
Corey, THANKS I have a question is DarkSide ok on rubber mats or they will slippery
CARPRO intends DarkSide to be used on exterior rubbers, however... James applied some to his rubber vehicle floor mats for testing. It made it slightly slicker. As long as they are textured and offer decent grip that way, it will be ok. We would advise testing it to make sure you are happy with the feel before doing the entire mat.
Hello, how would this product be used on rubber surfaces, like around the windows?
Hi Alex! Great question! We will do a followup video show off its use on window seals but overall it is a great use for Darkside.
@@SkyCarCaredid you ever post this video?
@@craigandrews7544 Hmmm you know what. I do not think we did! I will check with the guys since my memory is so bad but if not we will add it to the list.
Best,
Corey
Is this water based/soluble like PERL ?
I used PERL diluted 50:50 and works better than neat.
Or solvent /petroleum based ?
On a sidenote : I hate the short tirewall tires ...
Hi Andrea! Thanks for the comments! Darkside is not waterbed but a nano siloxane based formula.
Does this outlast Gyeon Tire ?
Yes
Anytime I purchase this on Amazon it comes with a dispenser pump that is way too big for the 500mL bottle.
Almost like they keep including the pump for the 1L bottle instead of the 500mL one.
Also went through different sellers as well. Even noticed the product picture shows with a black pump instead of a clear one that I received and which this video shows.
Anyone else notice this or if it’s intended?
Great question, it is intended. There is only one size nozzle and then if you have the 500ml size, you simply trim the bottom off with a knife or shears. Just hold it up to the bottle and then leave it slightly longer than you think.
@@SkyCarCare ahh k k, thanks for the update, makes sense I suppose after I ran into the same issue with multiple sellers.
CarPro should probably change their product pictures to be a bit more accurate as others on Amazon are actually thinking its an issue as well. :)
@@mike33033 Hi Mike, CARPRO does not sell anything on Amazon. So, it is up to whoever the resellers that are re-selling on Amazon to provide accurate info and images. Its actually impossible to even know when a product from Amazon is genuine. I would recommend shopping from an established detail supply company like ours that you can trust or at the very least not following or trusting information on Amazon. I totally get how convenient they are but unfortunately they are not at all trustworthy.
@@SkyCarCare sounds good, thanks for the update! The main thing Amazon unfortunately has going for it is the free shipping if you have prime, it’s super hard for other sites to compete with that when the basic customer thinks its equivalent item right haha. :(
But absolutely agree!!
@@mike33033 Sooooo true! Free shipping wihtou needing to spend 95$ and very fast and easy to search and order (amazing software) are their huge advantages.
Why don’t anyone do the inside of the tire… Not for aesthetic reasons but to protect the walls of the tyre?
Fair point that we have never really considered. I would imagine that the inside does not receive the same type of exposure as the outside of the tire does. Mainly looking at UV in that instance. But i would imaging the main reason people don't do this is the hassle of taking the tires off each time they want to apply. Plus even though Darkside does technically protect from the elements. Its main focus is to keep the tires clean for a better look.
I can tell you from experience, it is because they do not need any protection on the inside since it is not exposed to UV. My Saturn Sky sits only in the garage except for very few drives and the tires are from 2008 (almost 20 years old) and still look brand new although I have not dressed them in over a decade.
-Corey
can you dilute it??
No. PERL is the one you want if you wish to dilute it.
Can't watch any video with earth destroying teslas.
A wise man once said if you don't know what you're talking about it's best to keep your mouth closed 😃👌
CARPRO Darksideis JUNK. Don’t waste your money.
We would LOVE to know more about your experience because CARPRO DarkSide has become one of the most popular CARPRO products to date by how WELL it works. Im sure there has to be something causing you to have undesired results.
@@SkyCarCare I’m happy to share my experience. When I ordered the 16.9 ounce bottle, it came with a dispenser tube that was too long. No problem I thought. I’ll just trim the tube, only to find out that the dispenser itself didn’t work, which made it useless. I then poured some on an applicator, but the product is very slippery and slid out from my hand and spilled. At that point, I was done with it.
@@jdub1139 Thank you for sharing! So it sounds like you had a nozzle issue...not a CARPRO DarkSide Issue. The nozzles that CARPRO supplies come in one size that also fits their 1L bottles so the long nozzle makes sense and you were 100% correct in cutting it! It not dispensing is another concern. If you purchased the DarkSide from us, did you reach out to correct the dispenser issue? Our team would have sent you out a brand new immediately or tried to trouble shoot why it was not working with you via phone or email. Im really sorry that you were not able to give DarkSide a true chance. Im confident you would love it.
@@SkyCarCarewhat an idiot that guy was he obviously never used the product properly understandably because of nozzle reasons but he's going to give his negative comments that the product is junk. Unfuknbelievable 🤪👈