just received my ultra lt chassis, did not come with round holder or action screws. Also did not come with a bag rider which i did not notice in the description until after it arrived and i went back and looked. Thats BS. Add another $50 and wait another week. Good chassis though. This is my 4th with a Matrix chassis on order
I wish my MPA6.5BA rifle came with the round holder and barricade stop!! Also, I saw where you didn’t do the function check on the action screws to make sure the washers “pop” when unscrewed, I’ve got mine set at 85in/lbs bc that’s where the front screw “pops” at, should I just set them at 65in and be done with it? I don’t want to over torque the screws if I don’t have to.
Justice9111 watch their video on their new wedge lock action screws and it’ll make sense Edit: not trying to be a dick. At face value my comment didn’t make sense unless you’re using their new action screws
Is there any requirement to bed the action in these chassis , is there any point to it is what I’m asking , all my rifles have always been bedded , but I’ve heard people say not to bother on these or the matrix chassis
I realize this was posted a year ago and hopefully my question makes it to you guy. Is there enough clearance for a “Remage” barrel nut? Thanks for your time.
@Jeffrey Job if you are using the latest yt app on your phone or tablet, set to highest possible video quality and zoom in with your fingers pulling apart on the touch screen.
So if you use a defiance or impact with machined integral lug you don.t have to use the lug torque screws? I hope not my chassis arrived without those lug torque screws.
Use of this tech is not required for any action. Its just a potential enhancement. However, the lug lock will not work with the defiance deviant lug. Its too short. I think the Impact works fine with this system.
Should have replied earlier. They are always very helpful and quick to reply. Adding that torque lug really improved accuracy went from .28” groups to .15” groups. Tyvm
This doesn't match your manuals or even some of your other videos. I believe they say to first torque the front action screw to 30 in/lbs, then the rear to 30, then the front to 65 and then the rear. And Phil's video says to torque the lug lock to 30 in/lbs.
Perfect timing! I really love my BA Comp Chassis! Even if there was a small snaffu lol Keep up these great videos!
clear video and great angle of filming. Thanks for the informative video.
The double click on the torque was the most satisfying part. Haven’t seen that since my Marine Corps days.
Seems like a lot of movement possible ! Believe I'd be doing some bedding on this
I just received mine and it did not come with the two round carrier. Was I supposed to get one?
What color is the chassis?
just received my ultra lt chassis, did not come with round holder or action screws. Also did not come with a bag rider which i did not notice in the description until after it arrived and i went back and looked. Thats BS. Add another $50 and wait another week. Good chassis though. This is my 4th with a Matrix chassis on order
What color is this?
Man I could have used this a month ago!
do you think it would be better to mount this frame on a remington 700 adl 308.?
I wish my MPA6.5BA rifle came with the round holder and barricade stop!!
Also, I saw where you didn’t do the function check on the action screws to make sure the washers “pop” when unscrewed, I’ve got mine set at 85in/lbs bc that’s where the front screw “pops” at, should I just set them at 65in and be done with it? I don’t want to over torque the screws if I don’t have to.
Justice9111 watch their video on their new wedge lock action screws and it’ll make sense
Edit: not trying to be a dick. At face value my comment didn’t make sense unless you’re using their new action screws
Is there any requirement to bed the action in these chassis , is there any point to it is what I’m asking , all my rifles have always been bedded , but I’ve heard people say not to bother on these or the matrix chassis
Please what colour is?
I realize this was posted a year ago and hopefully my question makes it to you guy. Is there enough clearance for a “Remage” barrel nut? Thanks for your time.
If the barrel nut is less than 1.325" you'll have plenty of clearance
WHAT RECOIL LUG WOULD I USE FOR THE BERGARA HMR 6.5 CREEDMOOR? I COULD NOT FIND THAT ANSWER ANYWHERE ON YOUR WEBSITE. THANKS!
I wanna i got the Bergara BMP 6.5 creedmoor. I would like that know that answer as well lol
@@S2awtys I need to know for a Rem 700 5R action as well lol
should the action be bedded?
Close up of the small parts would be a great idea
Yup. Black shirt-black small parts and camera zoomed so far out and so dimly lit you can’t see anything. Waste of time.
@Jeffrey Job if you are using the latest yt app on your phone or tablet, set to highest possible video quality and zoom in with your fingers pulling apart on the touch screen.
So if you use a defiance or impact with machined integral lug you don.t have to use the lug torque screws? I hope not my chassis arrived without those lug torque screws.
Use of this tech is not required for any action. Its just a potential enhancement. However, the lug lock will not work with the defiance deviant lug. Its too short. I think the Impact works fine with this system.
Thank you. So should I get some of those to use for my impact action ? If so how do I go about getting them?
@@thundertoad3 Just send me an email. phil@masterpiecearms.com
Thank you. Love your videos !
Should have replied earlier. They are always very helpful and quick to reply. Adding that torque lug really improved accuracy went from .28” groups to .15” groups. Tyvm
This doesn't match your manuals or even some of your other videos. I believe they say to first torque the front action screw to 30 in/lbs, then the rear to 30, then the front to 65 and then the rear. And Phil's video says to torque the lug lock to 30 in/lbs.
that's one bad chassis
I’m just curious what torque wrench and extensions is he using lol?
What color is that chassis?