I love the running video thanks for keeping us up-to-date with your opinions it’s been a year now and you’re one of the first channels I came across that got me excited about doing RC! Thanks again and keep it up!!
You concerned face and reaction tells a different story when you were trying to modulate slowly on your table and it doesn't move just makes noise😕 , that there is too funny😄😄😄. I enjoyed the video as always.
Another good one, Francis. Thanks. Looking forward to seeing your review of the Ecto... even though I find that power wagon body to be somewhat underwhelming.
When I built my gatekeeper kit I really wanted to paint up and fit a 12.8in proline raptor body for it. I think the potential is clear with a wider stance and lightweight body. It climbs like a champ even with the cage. So with a lightweight body who knows. It tips because the anti roll bar unloads at certain angles and causes the rear end to straighten up aggressively rather than flex. Definitely got potential. Do your own version of the Ecto with a raptor body or even a half cab and leave the nice looking rear chassis open? PLEASE haha!
Great video!!! I like the ecto I don’t care what the wanna be pros think! I wanna get an ecto & set it up like your gatekeeper, put a big brushless set up in it & build as a rock racer kinda rig but make it crawl as well!!!🤩👍🏼
Great video! Quick question off topic. I recently bought a TRX4 on your recomendation. Should i be replacing the ESC and reciever? Already replaced a lot of parts. (Should have bought a kit instead) I am hearing stories of runaway TRX4's due to 3s lipo operation. ( i have set my ESC to lipo settings etc. )
Hallo😊 Will you review Gmade GOM? Similar body but front heavy, 2 speed transmission with dig function. Really want to now your opinion. Love your reviews 😎
How does it look with the creep body? I'm thinking about doing the same thing with my gatekeeper but wasn't sure how the body would look on a 12.8 wheelbase
It's not top heavy they put over drive in the front bad move makes it fall over. Works better with out over drive . Driving mine now. Over drive does not work in anything
Hi! Good review! I watched your Capra review too and liked it. Check out my Capra 😃 Which one would you recommend to go with, the Axial Bomber RR10 or the Element Gatekeeper? Cheers
Excellent work on all of your RC reviews. Thank you!
I love the running video thanks for keeping us up-to-date with your opinions it’s been a year now and you’re one of the first channels I came across that got me excited about doing RC! Thanks again and keep it up!!
Thank you for that!
I built mine luv it ..gave it some 15mm wheel extensions and pen springed the shocks its quite the performer
You concerned face and reaction tells a different story when you were trying to modulate slowly on your table and it doesn't move just makes noise😕 , that there is too funny😄😄😄.
I enjoyed the video as always.
I got lowering brackets for the shocks and SLW 725 hubs to widen the stance. It Crawls with the best of them now
Another good one, Francis. Thanks. Looking forward to seeing your review of the Ecto... even though I find that power wagon body to be somewhat underwhelming.
I love the way the stock electronics works on 7.4v out the box
When I built my gatekeeper kit I really wanted to paint up and fit a 12.8in proline raptor body for it. I think the potential is clear with a wider stance and lightweight body. It climbs like a champ even with the cage. So with a lightweight body who knows. It tips because the anti roll bar unloads at certain angles and causes the rear end to straighten up aggressively rather than flex. Definitely got potential. Do your own version of the Ecto with a raptor body or even a half cab and leave the nice looking rear chassis open? PLEASE haha!
Nice RC construction 👍
What size offset hubs did you use? Thanks! Great video as always!
Good review !
I do like the Ecto .
What motor & esc is that
Is there and wheel hex extensions that got this? I tried a few on Amazon with no luck yet.
I preorder one. I hope it comes soon
What hubs did you use????
Enjoying watching your videos, informative, interesting to watch, chill and you also show how the model runs. Where is this park?
What brushless setup did you use?
Can you look into rc drivers online video on the panda hobby 6x6 please thanks
i just lost a driveshsaft i wonder where i'd get a replacement?
Great video!!! I like the ecto I don’t care what the wanna be pros think! I wanna get an ecto & set it up like your gatekeeper, put a big brushless set up in it & build as a rock racer kinda rig but make it crawl as well!!!🤩👍🏼
There you go!! We just ran our gatekeeper without the body/cage and it was quite capable.
Kit all have their streight and weeknesses but always fun to build
Hi, i am new with crawler. Saw that TRX4 weakness on their portal input gear. Wondering how this Ecto gear? do they using similar gear?
Why the mismatched front and rear tires?
Will you be doing a standalone review of the Ecto and not just the Gatekeeper?
Great video! Quick question off topic. I recently bought a TRX4 on your recomendation. Should i be replacing the ESC and reciever? Already replaced a lot of parts. (Should have bought a kit instead) I am hearing stories of runaway TRX4's due to 3s lipo operation. ( i have set my ESC to lipo settings etc. )
Receiver is fine, hobbywing quick fusion 1800kv transformed mine!
What did you use to widen it? That's always been the thing preventing me from getting this was the narrow axles.
Vanquish Hex hub set that offset my wheels a bit.
where is this at
Im guessing the builder's kit comes with softer springs. Mine is from a kit and stands way lower than that, stock.
Hallo😊 Will you review Gmade GOM? Similar body but front heavy, 2 speed transmission with dig function. Really want to now your opinion. Love your reviews 😎
Fun!
I put a creep body on mine . Took the cage off after 3 or 4 runs . I like it a lot better without the cage .
How does it look with the creep body? I'm thinking about doing the same thing with my gatekeeper but wasn't sure how the body would look on a 12.8 wheelbase
@@HamAround23 looks good alot of trimming on the body but it's worth it .
Hi nice new ECTO!! tempting....it takes virus away!!
Maybe add the IFS kit ? Thanks, I really appreciate your reviews ✌🏻
IFS is good for scale but not good for performance. The Element RC one is low and big and catches most rocks.
Ecto body looks nice, eagerly awaiting its arrival and your thoughts regarding it!
It's not top heavy they put over drive in the front bad move makes it fall over. Works better with out over drive . Driving mine now. Over drive does not work in anything
1:20 it looks like the shock seal cap is on cross threaded no? Maybe not ... my eyes are old LoL!
Hi! Good review! I watched your Capra review too and liked it. Check out my Capra 😃 Which one would you recommend to go with, the Axial Bomber RR10 or the Element Gatekeeper? Cheers
Yo